MMSZ5248C-E3-18

MMSZ5225 to MMSZ5267 www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar Zener diodes Available • Standard Zener voltage tolerance is ± 5 % with a “B” suffix (e.g.: MMSZ5225B), suffix “C” is ± 2 % tolerance • AEC-Q101 qualified available DESIGN SUPPORT TOOLS click logo to get started • ESD capability according to AEC-Q101: Human body model > 8 kV Machine model > 800 V • Base P/N-E3 - RoHS-compliant, commercial grade • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified Models Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 3.3 to 75 V Test current IZT 1.7 to 20 mA VZ specification Thermal equilibrium Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY 3000 (8 mm tape on 7" reel) 15 000/box 10 000 (8 mm tape on 13" reel) 10 000/box MMSZ5225B-E3-08 to MMSZ5267B-E3-08 MMSZ5225C-E3-08 to MMSZ5267C-E3-08 MMSZ5225B-HE3-08 to MMSZ5267B-HE3-08 MMSZ5225 to MMSZ5267 MMSZ5225C-HE3-08 to MMSZ5267C-HE3-08 MMSZ5225B-E3-18 to MMSZ5267B-E3-18 MMSZ5225C-E3-18 to MMSZ5267C-E3-18 MMSZ5225B-HE3-18 to MMSZ5267B-HE3-18 MMSZ5225C-HE3-18 to MMSZ5267C-HE3-18 PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS SOD-123 10.3 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Thermal resistance junction to ambient air TEST CONDITION SYMBOL VALUE UNIT TL = 75 °C, on FR - 4 or FR - 5 board with minimum recommended solder pad layout Ptot 500 mW RthJA 340 K/W See table “Electrical Characteristics” On FR - 4 or FR - 5 board with minimum recommended solder pad layout Tj 150 Storage temperature range Tstg -65 to +150 Operating temperature range Top -55 to +150 Junction temperature °C Rev. 2.0, 20-Feb-18 Document Number: 85774 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMSZ5225 to MMSZ5267 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE VZ at IZT1 V NOM. TEST CURRENT IZT1 IZT2 mA REVERSE LEAKAGE CURRENT IR at VR μA MAX. DYNAMIC RESISTANCE (2) ZZ at IZT1 ZZK at IZT2  V MAX. TEMPERATURE COEFFICIENT VZ %/°C MAX. TYP. MMSZ5225 C5 3 20 0.25 50 1 30 1600 -0.075 MMSZ5226 D1 3.3 20 0.25 25 1 28 1600 -0.07 MMSZ5227 D2 3.6 20 0.25 15 1 24 1700 -0.065 MMSZ5228 D3 3.9 20 0.25 10 1 23 1900 -0.06 MMSZ5229 D4 4.3 20 0.25 5 1 22 2000 -0.055 MMSZ5230 D5 4.7 20 0.25 5 2 19 1900 ± 0.030 MMSZ5231 E1 5.1 20 0.25 5 2 17 1600 ± 0.030 MMSZ5232 E2 5.6 20 0.25 5 3 11 1600 0.038 MMSZ5233 E3 6 20 0.25 5 3.5 7 1600 0.038 MMSZ5234 E4 6.2 20 0.25 5 4 7 1000 0.045 MMSZ5235 E5 6.8 20 0.25 3 5 5 750 0.05 MMSZ5236 F1 7.5 20 0.25 3 6 6 500 0.058 MMSZ5237 F2 8.2 20 0.25 3 6.5 8 500 0.062 MMSZ5238 F3 8.7 20 0.25 3 6.5 8 600 0.065 MMSZ5239 F4 9.1 20 0.25 3 7 10 600 0.068 MMSZ5240 F5 10 20 0.25 3 8 17 600 0.075 MMSZ5241 H1 11 20 0.25 2 8.4 22 600 0.076 MMSZ5242 H2 12 20 0.25 1 9.1 30 600 0.077 MMSZ5243 H3 13 9.5 0.25 0.5 9.9 13 600 0.079 MMSZ5244 H4 14 9 0.25 0.1 10 15 600 0.082 MMSZ5245 H5 15 8.5 0.25 0.1 11 16 600 0.082 MMSZ5246 J1 16 7.8 0.25 0.1 12 17 600 0.083 MMSZ5247 J2 17 7.4 0.25 0.1 13 19 600 0.084 MMSZ5248 J3 18 7 0.25 0.1 14 21 600 0.085 MMSZ5249 J4 19 6.6 0.25 0.1 14 23 600 0.086 MMSZ5250 J5 20 6.2 0.25 0.1 15 25 600 0.086 MMSZ5251 K1 22 5.6 0.25 0.1 17 29 600 0.087 MMSZ5252 K2 24 5.2 0.25 0.1 18 33 600 0.087 MMSZ5253 K3 25 5 0.25 0.1 19 35 600 0.089 MMSZ5254 K4 27 4.6 0.25 0.1 21 41 600 0.09 MMSZ5255 K5 28 4.5 0.25 0.1 21 44 600 0.091 MMSZ5256 M1 30 4.2 0.25 0.1 23 49 600 0.091 MMSZ5257 M2 33 3.8 0.25 0.1 25 58 700 0.092 MMSZ5258 M3 36 3.4 0.25 0.1 27 70 700 0.093 MMSZ5259 M4 39 3.2 0.25 0.1 30 80 800 0.094 MMSZ5260 M5 43 3 0.25 0.1 33 93 900 0.095 MMSZ5261 N1 47 2.7 0.25 0.1 36 105 1000 0.095 MMSZ5262 N2 51 2.5 0.25 0.1 39 125 1100 0.096 MMSZ5263 N3 56 2.2 0.25 0.1 43 150 1300 0.096 MMSZ5264 N4 60 2.1 0.25 0.1 46 170 1400 0.097 MMSZ5265 N5 62 2 0.25 0.1 47 185 1400 0.097 MMSZ5266 P1 68 1.8 0.25 0.1 52 230 1600 0.097 MMSZ5267 P2 75 1.7 0.25 0.1 56 270 1700 0.098 Notes • Maximum VF = 0.9 V, at IF = 10 mA (1) Measured with device junction in thermal equilibrium (2) The Zener Impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the Zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener Impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units Rev. 2.0, 20-Feb-18 Document Number: 85774 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMSZ5225 to MMSZ5267 www.vishay.com Vishay Semiconductors Axis Title Axis Title 10 MMSZ5262 8 MMSZ5263 7 MMSZ5265 4 MMSZ5266 3 MMSZ5267 1st line 2nd line 5 2nd line IZ (mA) 1000 MMSZ5264 6 100 40 MMSZ5240 35 MMSZ5241 30 MMSZ5242 25 MMSZ5243 20 MMSZ5244 15 2 10 1 5 0 0 20 10000 45 40 60 80 100 1000 1st line 2nd line 9 2nd line IZ (mA) 50 10000 100 MMSZ5245 MMSZ5246 0 10 10 0 5 10 VZ (V) 2nd line Fig. 1 - Breakdown Characteristics Fig. 4 - Breakdown Characteristics Axis Title Axis Title MMSZ5254 14 MMSZ5255 12 MMSZ5256 10 MMSZ5257 8 MMSZ5258 90 1000 2nd line IZ (mA) 16 100 MMSZ5259 4 MMSZ5260 2 80 MMSZ5232 70 MMSZ5233 60 MMSZ5234 50 MMSZ5235 40 MMSZ5236 30 MMSZ5237 20 MMSZ5238 1000 100 10 MMSZ5261 0 20 40 MMSZ5239 0 10 0 10000 MMSZ5231 1st line 2nd line MMSZ5253 1st line 2nd line 2nd line IZ (mA) 100 10000 6 20 VZ (V) 2nd line 20 18 15 60 10 0 2 4 6 8 10 VZ (V) 2nd line VZ (V) 2nd line Fig. 2 - Breakdown Characteristics Fig. 5 - Breakdown Characteristics Axis Title Axis Title 200 10000 30 10000 180 MMSZ5247 MMSZ5249 15 MMSZ5250 MMSZ5251 10 100 MMSZ5252 2nd line IZ (mA) 1000 MMSZ5248 1st line 2nd line 2nd line IZ (mA) 20 160 MMSZ5225 140 MMSZ5226 120 MMSZ5227 100 MMSZ5228 80 MMSZ5229 60 100 MMSZ5230 40 5 1000 1st line 2nd line 25 20 0 10 0 5 10 15 20 25 30 0 10 0 1 2 3 4 5 VZ (V) 2nd line VZ (V) 2nd line Fig. 3 - Breakdown Characteristics Fig. 6 - Breakdown Characteristics 6 Rev. 2.0, 20-Feb-18 Document Number: 85774 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000