MPCA75136

75136 www.vishay.com Vishay Custom Magnetics Power-Pole Assembly for the Power Electronics Lab FEATURES • Configurable power-pole PCA to perform various power electronics experiments • 42 V DC-bus voltage to reduce electrical hazards • Configurable between on-board PWM control and an externally driven PWM source • Complete digital / analog interface with active current sensing • Over-voltage and over-current fault protection for each inverter • Includes pre-made separate “daughter” PCAs for experiments demonstrating flyback, buck-boost, and forward converter topologies DESCRIPTION Vishay is a proud provider of the hardware for the Power Electronics Lab, based on the approach in the textbook Power Electronics: Converters, Applications and Design. The power-pole PCA (printed circuit assembly) provides a reconfigurable totem-pole circuit to conduct several experiments in the Power Electronics Lab, based on the approach in the textbook Power Electronics: Converters, Applications and Design, written by Ned Mohan, Tore M. Undeland, and William P. Robbins; and the Electric Drives Lab based on the approach in the textbook Electric Machines and Drives: A First Course by Ned Mohan. Revision: 24-Nov-15 Document Number: 34406 1 For technical questions, contact: universityproducts@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000