MPMT1002BT1

MPM (Divider) www.vishay.com Vishay Dale Thin Film Molded, SOT-23 Thin Film Resistor, Surface Mount Divider Network FEATURES • Excellent long term ratio stability (ΔR ± 0.015 %, 2000 h, +70 °C) • Ratio tolerances to ± 0.01 % Available • Low TCR tracking ± 2 ppm • Zero ohm jumper option available • Standard JEDEC® TO-236 package variation AB • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details LINKS TO ADDITIONAL RESOURCES Footprints Packages TYPICAL PERFORMANCE Vishay Dale Thin Film MPM Series Dividers provide ± 2 ppm/°C tracking and a ratio tolerance as tight as 0.01 %, small size, and exceptional stability for all surface mount applications. The standard SOT-23 package format with unity and common standard resistance divider ratios provide easy selection for most applications requiring matched pair resistor elements. The ratios listed are available for off the shelf delivery. Ratios not listed but within the datasheet limits are available without NRE charge. See “Global Part Number Information” table for guidance how to create part number for ordering. ABSOLUTE TCR TOL. TRACKING 25 2 ABSOLUTE RATIO 0.1 0.05 Note • Typical performance TCR and tolerance does not apply to zero ohm jumper SCHEMATIC 3 R1 1 R2 2 STANDARD DIVIDER RATIOS (R2/R1) COMMONLY STOCKED BY DISTRIBUTORS RATIO 100:1 50:1 25:1 20:1 10:1 10:1 9:1 9:1 6:1 5:1 5:1 4:1 4:1 3:1 2:1 2:1 Revision: 03-Jan-2022 R2 (Ω) 100K 50K 25K 20K 20K 10K 9K 900 6K 10K 5K 8K 4K 7.5K 50K 12K R1 (Ω) 1K 1K 1K 1K 2K 1K 1K 100 1K 2K 1K 2K 1K 2.5K 25K 6K RATIO 2:1 2:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:2 1:2.5 1:4 1:9 R2 (Ω) 10K 2K 100K 50K 25K 10K 5K 2.5K 2K 1K 500 250 5K 10K 7.5K 10K R1 (Ω) 5K 1K 100K 50K 25K 10K 5K 2.5K 2K 1K 500 250 10K 25K 30K 90K Document Number: 60001 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MPM (Divider) www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range Resistance for Jumper TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio SPECIFICATIONS Passivated nichrome 3 250 Ω to 100 kΩ per resistor ≤ 50 mΩ ± 25 ppm/°C ± 2 ppm/°C (typical) ± 0.05 % to ± 1.0 % ± 0.01 % to 0.5 % 100 mW 200 mW ΔR ± 0.05 % ΔR ± 0.015 % 0.1 ppm/V 100 V max. not to exceed P x R -55 °C to +125 °C -55 °C to +150 °C < -30 dB 0.2 μV/°C ΔR ± 0.01 % ΔR ± 0.002 % CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C Maximum at +70 °C Maximum at +70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at +25 °C 1 year at +25 °C Note • TCR and TCR tracking are not available for parts with zero ohm jumpers DIMENSIONS AND IMPRINTING in inches and millimeters INCHES MIN. MAX. 0.031 0.040 0.001 0.004 0.105 0.120 0.071 0.079 0.015 0.021 0.083 0.098 0.047 0.055 0.005 0.010 0.0035 0.0059 0.017 0.022 0 8° DIMENSION T H L A S A1 K 1 Pin # 2 J MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Tin Lead Option Tin Lead and Lead (Pb)-free Finish Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Sn85 Plated Ø DERATING CURVE 10000 100 100 % = 0.2 W 80 1000 60 1st line 2nd line B A A1 B S W L H T J K Ø 2nd line Rated Power (%) 3 W MILLIMETERS MIN. MAX. 0.79 1.02 0.02 0.10 2.67 3.05 1.80 2.00 0.38 0.54 2.10 2.50 1.20 1.40 0.13 0.25 0.089 0.15 0.44 0.55 0 8° 40 100 20 10 0 0 70 125 150 Ambient Temperature (°C) Revision: 03-Jan-2022 Document Number: 60001 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MPM (Divider) www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MPM1003AWS M M P M P M T 1 0 GLOBAL MODEL (3 or 4 digits) RESISTANCE (4 or 8 digits) MPM (Tin lead) First 3 digits are significant figures and the last digit specifies the number of zeros to follow. When like values are required use total resistance. When dual values are required list both values. 0000 = zero ohm jumper for R value UUUU = open connection in place of R value MPMT (Lead (Pb)-free) (e3) 1 0 0 3 0 1 5 0 0 1 TOLERANCE AND RATIO TOLERANCE (1) Abs. Tol. Ratio A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F=1% Z = 0.1 % (2) Q = 0.05 % (2) N = for jumpers only 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.025 % 0.01 % A W S A T 1 PACKAGING BS = BULK 100 min., 1 mult. WS = WAFFLE 100 min., 1 mult. TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. (3) T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel 4000 TS = 100 min., 1 mult. Example: (List R1 first in part number with dual values) 1002 = 10K (5K / 5K) 1003 = 100K (50K / 50K) 10011002 = 1K / 10K divider 0000UUUU = R1 = jumper, R2 = open UUUU0000 = R1 = open, R2 = jumper 00UUUU00 = jumper connection pin 1 to pin 2 0000 = R1 and R2 = jumpers 00001002 = R1 = jumper, R2 = 10K 50010000 = R1 = 5K, R2 = jumper Historical Part Number Example: MPM1002BW (for reference purposes only) MPM 1002 B W SERIES RESISTANCE TOLERANCE AND RATIO TOLERANCE PACKAGING Notes (1) For combinations of a resistor and a zero ohm jumper only the absolute tolerance applies to the resistor value (2) Tolerance available 1K and up equal values only (3) Preferred packaging code Revision: 03-Jan-2022 Document Number: 60001 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000