MRS-13751L00JE1413

MRS www.vishay.com Vishay Mills Wirewound Resistor, Open Style, Current Shunts, Very Low Value FEATURES • Extremely low resistance values for current sensing applications • Low temperature coefficients (down to 100 ppm/°C) • Complete welded construction • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL MODEL TOLERANCE (2) % RESISTANCE RANGE  MRS-1298…xx MRS1298xx 1, 5, 10 0.001 to 0.050 MRS-1367…xx MRS1367xx 1, 5, 10 0.001 to 0.100 MRS-1375…xx MRS1375xx 1, 5, 10 0.001 to 0.010 MRS-1510…xx MRS1510xx 1, 5, 10 0.001 to 0.500 GLOBAL MODEL (1) Notes (1) The xx is for the two digit “special” number as described in Dimensions tables MRS-1298, MRS-1367, MRS-1375, and MRS-1510. (2) Other tolerances may be available, contact factory. TECHNICAL SPECIFICATIONS PARAMETER UNIT MRS RESISTOR CHARACTERISTICS Temperature Coefficient ppm/°C Typical is ± 100 (- 10 °C to + 80 °C) consult factory if application is TC sensitive Maximum Current Rating A Dependent upon configuration, see Dimensions tables MRS-1298, MRS-1367, MRS-1375, and MRS-1510 Operating Temperature Range °C - 55 to + 275 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: MRS-1298R010JE1401 (visit www.vishay.net Vishay Dale parts numbering manual for all options) M R S - 1 2 9 8 R 0 1 0 J E 1 4 0 GLOBAL MODEL (8 digits) VALUE (4 digits) TOLERANCE (1 digit) PACKAGING CODE (3 digits) SPECIAL (2 digits) (See Standard Electrical Specifications Global Model column for options) L = m (below 0.01 ) R = Decimal 5L00 = 0.005  R010 = 0.01  F=±1% J=±5% K = ± 10 % E14 = Bulk pack (Dash Number) From 01 to 99 as applicable 1 Historical Part Number example: MRS129801J MRS1298 01 5% HISTORICAL MODEL SIZE TOLERANCE Revision: 28-Jun-12 Document Number: 31805 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MRS www.vishay.com Vishay Mills DIMENSIONS in inches [millimeters] H 0.062 [1.57] Max. Diameter 0.60 [15.24] 0.09 [2.29] Tinned 0.215 [5.46] MRS-1298 GLOBAL MODEL SPECIAL 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 RESISTANCE  0.010 0.005 0.003 0.001 0.050 0.010 0.005 0.002 0.00382 0.013 0.033 0.025 0.033 0.008 0.020 0.050 0.004 0.010 CURRENT RATING (MAXIMUM) A 25 25 25 25 10 15 15 15 15 15 15 15 15 15 10 15 25 15 DIMENSION H 0.750 [19.05] 0.750 [19.05] 0.580 [14.73] 0.400 [10.16] 0.700 [17.78] 0.350 [9.89] 0.350 [9.89] 0.400 [10.16] 0.350 [9.89] 1.000 [25.40] 0.600 [15.24] 0.400 [10.16] 0.875 [22.22] 0.685 [17.40] 0.300 [7.62] 0.600 [15.24] 0.500 [12.70] 0.350 [9.89] H1 H CC MRS-1367 GLOBAL MODEL SPECIAL 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 21 25 RESISTANCE  0.050 0.010 0.020 0.025 0.040 0.050 0.070 0.070 0.005 0.033 0.025 0.015 0.050 0.100 0.020 0.025 0.030 0.022 Revision: 28-Jun-12 CURRENT RATING (MAXIMUM) A 10 15 10 10 10 8 8 10 15 8 10 10 10 6.5 12.5 15 10 10 DIMENSION H TYPICAL 0.750 [19.05] 0.750 [19.05] 0.500 [12.70] 0.625 [15.88] 0.800 [20.32] 0.500 [12.70] 0.650 [16.51] 0.800 [20.32] 0.750 [19.05] 0.500 [12.70] 0.475 [12.07] 0.750 [19.05] 0.625 [15.88] 0.620 [15.75] 0.500 [12.70] 0.540 [13.72] 0.725 [18.42] 0.710 [18.03] DIMENSION CC 1.500 [38.10] 0.900 [22.86] 0.750 [19.05] 0.750 [19.05] 0.812 [20.62] 0.960 [24.38] 1.300 [33.02] 1.600 [40.64] 0.750 [19.05] 0.400 [10.16] 0.960 [24.38] 1.500 [38.10] 1.080 [27.43] 0.625 [15.88] 0.600 [15.24] 0.800 [20.32] 0.750 [19.05] 0.620 [15.75] DIMENSION H1 TYPICAL 0.500 [12.70] 0.625 [15.88] 0.375 [9.53] 0.500 [12.70] 0.675 [17.15] 0.375 [9.53] 0.525 [13.34] 0.675 [17.15] 0.550 [13.97] 0.325 [8.26] 0.350 [9.89] 0.625 [15.88] 0.500 [12.70] 0.400 [10.16] 0.375 [9.53] 0.415 [10.54] 0.525 [13.34] 0.510 [12.95] Document Number: 31805 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MRS www.vishay.com Vishay Mills DIMENSIONS in inches [millimeters] H LD L CC SIDE END MRS-1375 RESISTANCE  CURRENT RATING (MAXIMUM) A DIMENSION L DIMENSION H DIMENSION CC DIMENSION LD 01 0.001 30 0.750 [19.05] 0.500 [12.70] 0.500 [12.70] 0.080 [2.03] 02 0.002 40 1.700 [43.18] 0.500 [12.70] 0.500 [12.70] 0.080 [2.03] 03 0.003 40 1.700 [43.18] 0.500 [12.70] 0.500 [12.70] 0.080 [2.03] 04 0.001 40 1.700 [43.18] 0.500 [12.70] 0.500 [12.70] 0.080 [2.03] 05 0.002 30 1.250 [31.75] 0.750 [19.05] 0.500 [12.70] 0.080 [2.03] 06 0.004 30 1.250 [31.75] 0.750 [19.05] 0.500 [12.70] 0.080 [2.03] 07 0.00166 35 1.600 [40.64] 0.500 [12.70] 0.500 [12.70] 0.080 [2.03] 09 0.005 40 2.865 [72.77] 0.750 [19.05] 0.500 [12.70] 0.080 [2.03] 10 0.010 20 1.400 [35.56] 0.750 [19.05] 0.500 [12.70] 0.080 [2.03] 11 0.004 30 1.200 [30.48] 0.400 [10.16] 0.500 [12.70] 0.080 [2.03] 13 0.001 40 1.250 [31.75] 0.750 [19.05] 0.500 [12.70] 0.080 [2.03] RESISTANCE  CURRENT RATING (MAXIMUM) A DIMENSION L DIMENSION H DIMENSION CC DIMENSION LD 01 0.050 15 1.00 [25.40] 0.400 [10.16] 0.215 [5.46] 0.057 [1.45] 02 0.003 25 1.10 [27.94] 0.355 [9.02] 0.200 [5.08] 0.040 [1.02] 03 0.0015 40 1.10 [27.94] 0.380 [9.65] 0.270 [6.86] 0.081 [2.06] 04 0.001 40 1.00 [25.40] 0.500 [12.70] 0.300 [7.62] 0.081 [2.06] 05 0.002 30 1.25 [31.75] 0.750 [19.05] 0.375 [9.53] 0.080 [2.03] 06 0.001 80 2.19 [55.63] 0.625 [15.87] 0.625 [15.87] 0.128 [3.25] GLOBAL MODEL SPECIAL MRS-1510 GLOBAL MODEL SPECIAL MATERIAL SPECIFICATIONS AMBIENT TEMERATURE DERATING Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Derating is required for ambient temperatures above 25 °C per the following graph: Standard Terminals: Tinned copper Part Marking: None DERATING RATED POWER IN % Coating: Silicone, when requested 120 100 80 60 40 20 0 - 55 0 50 25 Revision: 28-Jun-12 100 150 200 250 275 AMBIENT TEMPERATURE IN °C Document Number: 31805 3 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000