NOMCA
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,
Precision Automotive, AEC-Q200 Qualified, Networks
FEATURES
• Standard 14 pins and 16 pins counts
(0.150" narrow body) JEDEC MS-012
variation AB and AC
• Rugged molded case construction
• Excellent long term ratio stability
(ΔR ± 0.015 %)
• Low TCR tracking ± 5 ppm/°C
• AEC-Q200 ESD rated 1 kV (< 10 kΩ)
The NOMCA series features a standard 14 pin or 16 pin
narrow body (0.150") small outline SMT package. The
network is constructed with tantalum nitride resistor film
on high purity alumina substrate for improved ESD
and moisture protection. Custom schematics are available
consult factory.
• AEC-Q200 ESD rated 2 kV (>10 kΩ)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
TRACKING
25
5
ABSOLUTE
RATIO
0.10
0.05
SCHEMATICS
03 Schematic
01 Schematic
Lead #1
Lead #1
The 03 circuit provides a choice of 7 or 8 equal value
resistors (14 or 16). Custom schematics available.
The 01 circuit provides a choice of 13 or 15 equal value
resistors (14 or 16). Custom schematics available.
STANDARD RESISTANCE OFFERING (Equal Value Resistors)
ISOLATED (03) SCHEMATIC
1 kΩ
2 kΩ
5 kΩ
10 kΩ
20 kΩ
50 kΩ
Note
• Consult factory for additional values
Revision: 16-Apr-2020
Document Number: 60117
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Tantalum nitride (Ta2N)
-
Pin/Lead Number
14, 16
-
Resistance Range
1 kΩ to 50 kΩ each resistor
-
TCR: Absolute
± 25 ppm/°C (standard)
-55 °C to +125 °C
TCR: Tracking
± 5 ppm/°C (typical)
-55 °C to +125 °C
± 0.10 % to ± 5 %
+25 °C
± 0.05 % to ± 0.5 %
+25 °C
Power Rating: Resistor
50 mW ((typical) for (01) schematic);
100 mW ((typical) for (03) schematic)
Maximum at +70 °C
Power Rating: Package
400 mW;
500 mW
Maximum at +70 °C
Stability: Absolute
ΔR ± 0.05 %
1000 h at +125 °C
Stability: Ratio
ΔR ± 0.015 %
1000 h at +125 °C
Tolerance: Absolute
Tolerance: Ratio
Voltage Coefficient
< 0.1 ppm/V
Working Voltage
-
100 V max. not to exceed
P x R
-
Operating Temperature Range
-55 °C to +125 °C
-
Storage Temperature Range
-55 °C to +150 °C
-
≤ -30 dB
-
Noise
Thermal EMF
0.08 μV/°C
-
Shelf Life Stability: Absolute
ΔR ± 0.01 %
1 year at +25 °C
Shelf Life Stability: Ratio
ΔR ± 0.002 %
1 year at +25 °C
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
H E
Index Area
PIN 1 Locator
h x 45°
O
C
e
A
B
L
A1
14
16
INCHES
MILLIMETERS
INCHES
MILLIMETERS
H
0.235
5.969
0.235
5.969
E
0.154
3.911
0.154
3.910
O
0.340
8.363
0.390
9.906
A
0.063
1.600
0.063
1.600
e
0.050
1.270
0.050
1.270
B
0.015
0.381
0.015
0.381
C
0.008
0.203
0.008
0.203
L
0.025
0.635
0.025
0.635
A1
0.006
0.152
0.006
0.152
h
0.015
0.381
0.015
0.381
MECHANICAL SPECIFICATIONS
Resistive Element
Tantalum nitride (Ta2N)
Substrate Material
Ceramic
Body
Terminals
Lead (Pb)-free Option
Revision: 16-Apr-2020
Molded epoxy
Copper alloy
100 % matte tin plate or Ni/Pd/Au solder free option
Document Number: 60117
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
ORDERING INFORMATION CHECK LIST (Customs)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to
whichreference resistors
3. Reference by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)
ENVIRONMENTAL TEST
CONDITONS
LIMITS PER
AQEC-Q200
TYPICAL VISHAY
PERFORMANCE
< 10K
TYPICAL VISHAY
PERFORMANCE
> 10K
Resistance Temperature
Characteristic
-55 °C to +125 °C
± 25 ppm/°C
15 ppm/°C
15 ppm/°C
Max. Ambient Temperature
at Rated Wattage
+70 °C
+70 °C
+70 °C
Max. Ambient Temperature
at Power Derating
+150 °C
+150 °C
+150 °C
ΔR
MIL-STD-202, 108, 1000 h at 125 °C
± 0.20 %
0.005 %
0.012 %
Temperature Cycling
ΔR
JESD22, A104, 1000 cycles,
- 55 °C to + 125 °C
± 0.25 %
0.004 %
0.004 %
Moisture Resistance
ΔR
MIL-STD-202 method 106
± 0.20 %
0.007 %
0.007 %
ΔR
MIL-STD-202, 103, 1000 h at 85 °C,
85 % RH, 10 % P
± 0.25 %
0.021 %
0.033 %
High Temperature Exposure
Biased Humidity
Life
ΔR
MIL-STD-202, 108, 1000 h at 125 °C
± 0.10 %
0.012 %
0.029 %
Mechanical Shock
ΔR
MIL-STD-202 method 213, condition C
± 0.25 %
0.001 %
0.001 %
Vibration
ΔR
MIL-STD-202 method 204,
10 Hz to 2 kHz
± 0.25 %
0.001 %
0.001 %
Resistance to Soldering Heat
ΔR
0.001 %
Electrostatic Discharg
ΔR
MIL-STD-202, 204, condition B
± 0.10 %
-0.002 %
AEC-Q200-002 at 1 kV, human body
± 0.50 %
0.065 %
AEC-Q200-002 at 2 kV, human body
± 0.50 %
J-STD-002 method B and B1
95 %
Solderability
Terminal Strenght
ΔR
0.170 %
Acceptable
Acceptable
AEC-Q200-006 at 1 kg for 60 s
Acceptable
Acceptable
AEC-Q200-001 Para 4.0
Acceptable
Acceptable
Flame Retardance
DERATING CURVE
Precent of Rated Power
100
100 % =
400 mW (14p)
500 mW (16p)
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
Revision: 16-Apr-2020
Document Number: 60117
3
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NOMCA
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: NOMCA14031002BUF
N
O
M
GLOBAL MODEL
(4 or 5 digits)
NOMCA
(Lead (Pb)-free)
(e3)
C
A
1
4
0
3
PINS
SCHEMATIC
RESISTANCE
14
16
01 = 13 or 15
bussed equal
resistors
03 = 7 or 8
isolated
equal value
resistors
First 3 digits are
significant figures
and the last digit
specifies the number
of zeros to follow.
Example:
1002 = 10K
1
0
0
TOLERANCE AND
RATIO TOLERANCE
Abs. Tol.
Ratio
A = 0.1 % (1)
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
G=2%
J=5%
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
2
A
T
1
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel 2500
TS = 100 min., 1 mult
UF = TUBED
Notes
(1) Tolerance available 1K and up
(2) Preferred packaging code
Revision: 16-Apr-2020
Document Number: 60117
4
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
