NTCLE213E3
www.vishay.com
Vishay BCcomponents
NTC Thermistor, Epoxy Coated Mini Sensor
FEATURES
•
•
•
•
•
•
•
•
Advanced NTC technology
Temperature range from -55 °C to +150 °C
Highly resistant to thermal shocks
Small body diameter of max. 2.5 mm
AEC-Q200 qualified
Fast response time
High sensitivity
Delivery in bulk or in tape with extra long leads
(for automatic mounting)
• Mounting: radial
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
Design Tools
Models
APPLICATIONS
Related
Documents
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Operating temperature range
Response time (63.2 %) 25 °C to 85 °C
stirred air (for info)
Dissipation factor in still air (for info)
Maximum power dissipation at 55 °C
Min. dielectric withstanding voltage
between terminals and coated body
Insulation resistance at 100 VDC
Weight
VALUE
2.1K to 100K
± 1 to ± 5
3511 to 4190
± 0.5 to ± 1.5
-55 to +150
UNIT
%
K
%
°C
5
s
1.8
100
mW
mW
500
VAC
> 10M
100
mg
Temperature sensing, control and compensation.
E.g. inlet air temperature sensing thermistors or ECT in
automotive applications, sensor elements in industrial and
commercial applications, heating systems and industrial
systems.
DESCRIPTION
These negative temperature coefficient thermistors consist
of a mini-chip soldered between two tin plated 0.4 mm
nickel leads, coated with ocher colored epoxy lacquer and
coded with a color dot.
MOUNTING
Important mounting and handling instructions: see
www.vishay.com/doc?29222
The thermistors are suitable for all standard assembly
processes like crimping, soldering, welding, and potting into
epoxy or silicon resins. The parameters and materials of the
assembly process should be chosen in accordance with the
lead-wire and coated body and validated in the application.
The mounting process should be in compliance with the
following guidelines and recommendations:
• Peeling forces on the leads should be reduced to a
minimum and should never exceed 3 N. A strain relief tool
should be used if needed
• Avoid large temperature gradients between the welding
region and the sensor
PACKAGING
• Bulk components are delivered in boxes of 500
components
• Taped components are delivered on a reel of 1500
components (according to IEC 60286-2 but with extra
long leads: H0 = 32 mm)
ELECTRICAL DATA AND ORDERING INFORMATION
R25
()
R25-TOL.
(± %)
B25/85
(K)
B25/85-TOL.
(± %)
COLOR DOT
(see next page)
SAP MATERIAL AND
ORDERING NUMBER (1)
2100
10 000
10 000
12 000
30 000
100 000
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
3511
3435
3984
3740
3935
4190
1
1
0.5
1
0.75
1.5
Orange
Red
Blue
Black
Green
Brown
NTCLE213E3212xMyy
NTCLE213E3103xLyy
NTCLE213E3103xHyy
NTCLE213E3123xMyy
NTCLE213E3303xHyy
NTCLE213E3104xXyy
Note
(1) Replace the x-digit by J for R -tolerance of 5 %, H for 3 %, G for 2 %, and F for 1 %.
25
Replace the y-digits by B0 for bulk delivery and by T1 for tape and reel delivery
Revision: 16-Oct-2020
Document Number: 29154
1
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCLE213E3
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
D
T
B
Color
dot
H1
H2
F
L
F1
d
PARAMETER
VALUE
B max.
2.5
T max.
2.5
F
1.1
F1
2.54
D max. (mounting diameter)
d
2.5
0.4 ± 10 %
H1 max.
H2 max.
L
5.5
10
41 ± 1
Note
• Non-dimensioned details do not affect the performance of the thermistors
Revision: 16-Oct-2020
Document Number: 29154
2
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000