NTCS0603E3.....T
www.vishay.com
Vishay BCcomponents
SMD 0603, Glass Protected NTC Thermistors
FEATURES
• TCR ranging from -7 %/K at -40 °C to -2 %/K
at 150 °C
• Tolerance on R25 down to 1 %, and on B25/85
down to 1 %
• Suitable for wave or reflow soldering
• NiSn terminations
• Fully glass coated and protected
• cULus recognized, file E148885
(UL category XGPU2 / XGPU8)
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
ADDITIONAL RESOURCES
3D 3D
3D Models
Design Tools
APPLICATIONS
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
Maximum dissipation at 25 °C
Thermal time constant
Dissipation factor D
Operating temperature range
at zero power
Weight
VALUE
2.0K to 100K
± 1; ± 2; ± 3; ± 5
3420 to 4100
±1
125
8
3.0
UNIT
%
K
%
mW
s
mW/K
-40 to +150
°C
0.006
g
DESIGN-IN SUPPORT
For complete curve computation, please visit:
www.vishay.com/thermistors/ntc-curve-list/
AGENCY APPROVALS
Agency approval documents, please see:
www.vishay.com/ppg?29056&documents
• Temperature sensing, protection and compensation in
automotive,
industrial,
telecom
and
consumer
applications. Examples are:
- Battery chargers
- Power suppliers
- Office equipment
- LCD compensation
- In-car entertainment
DESCRIPTION
Size 0603 (M1608) glass protected SMD chip thermistor
with negative temperature coefficient (TCR) and matte tin
(Sn) plated terminations. The device has no marking.
PACKAGING
Available in 8 mm punched paper tape on reel package of
4000 units.
ELECTRICAL DATA AND ORDERING INFORMATION
R25
()
2000
2200
2700
4700
10 000
10 000
10 000
15 000
22 000
33 000
47 000
68 000
100 000
R25-TOL.
(± %)
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
1, 2, 3, 5
B25/85
(K)
3420
3520
3600
3830
3435
3610
3960
3600
3730
3860
3960
3985
4100
B25/85-TOL.
(± %)
1
1
1
1
1
1
1
1
1
1
1
1
1
UL
RECOGNIZED
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
SAP MATERIAL AND ORDERING NUMBER (1)
NTCS0603E3202*LT
NTCS0603E3222*MT
NTCS0603E3272*MT
NTCS0603E3472*HT
NTCS0603E3103*LT
NTCS0603E3103*MT
NTCS0603E3103*HT
NTCS0603E3153*MT
NTCS0603E3223*MT
NTCS0603E3333*HT
NTCS0603E3473*HT
NTCS0603E3683*HT
NTCS0603E3104*XT
Note
(1) Replace * in SAP material number by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 % tolerance on R
25
Revision: 14-Jan-2020
Document Number: 29056
1
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS0603E3.....T
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
T
W
L2
L4
L1
L1
W
T
L2 AND L3
MIN.
L4
MIN.
1.6 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
0.2
0.4
L3
SOLDERING CONDITIONS
This SMD thermistor is only suitable for wave or reflow soldering, in accordance with JEDEC® J-STD-020. The maximum
temperature of 260 °C during 40 s should not be exceeded.
Typical examples of a soldering processes that will provide reliable joints without damage, are shown below.
Lead (Pb)-free Reflow Soldering Profile
Reflow Soldering
10 s
300
≈ 245 °C
215 °C
200
Temperature (°C)
Temperature (°C)
250
10 s
180 °C
130 °C
150
40 s
100
2 K/s
50
0
0
50
100
150
40 s max.
300
260 °C
250
235 °C
200
≈ 170 °C
20 s min.
150
≈ 60 s
6 K/s
max.
limit
normal
≈ 120 °C
100
2 K/s
max.
50
0
250
200
260 °C
≈ 245 °C
0
50
100
150
Time (s)
200
250
300
350
Time (s)
Recommended solder land pattern dimensions (mm)
0.8
1.0
2.4
PACKAGING
TAPE SPECIFICATIONS
All tape specifications are in accordance with IEC 60286-3. Basic dimensions are given below. Carrier tape material is paper.
PAPER TAPE
T
P0
P2
D0
E1
F
W
B0
A0
P1
JWB288
T1
DIMENSIONS OF PAPER TAPE in millimeters
PARAMETER
A0 (1)
B0 (1)
W
E1
F
D0
P0 (2)
P1
P2
T tape thickness max.
T1 cover tape thickness max.
DIMENSION
1.15 ± 0.1
1.9 ± 0.1
8.0 ± 0.2
1.75 ± 0.1
3.5 ± 0.05
1.55 ± 0.05
4.0 ± 0.1
4.0 ± 0.1
2.0 ± 0.05
1.1
0.1
Notes
(1) Measured 0.3 mm above base pocket
(2) P pitch cumulative error over any 10 pitches ± 0.2 mm
0
Revision: 14-Jan-2020
Document Number: 29056
2
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
1
Document Number: 91000