NTCS0603E3124SMT

NTCS....E3...SMT www.vishay.com Vishay BCcomponents SMD NTC Thermistors With Enhanced Stability FEATURES • Monolithic SMD with nickel barrier and pure tin • Wide temperature range from -40 °C to +125 °C • Enhanced stability throughout the lifetime (maximum variation of initial R25 °C of ± 0.5 % after 10 000 hours at any temperature) • Ideal for wave and reflow soldering • Delivered on punched paper tape on reel QUICK REFERENCE DATA PARAMETER VALUE Resistance value at 25 °C UNIT 100K to 210K Ω 1 % 3590 K Tolerance on R25-value B25/85-value Tolerance on B25/85-value ±1 % 70 (0402), 120 (0603), 210 (0805) mW Response time (63.2 %) 25 °C to 85 °C still air (for info by case) 4 (0402), 6 (0603), 10 (0805) s Dissipation factor δ in still air (for each case) 2 (0402), 3 (0603), 3.5 (0805) mW/K Operating temperature range -40 to +125 °C Weight 1.2 (0402), 6 (0603), 8 (0805) mg Maximum power dissipation (by case) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • All applications that require the utmost stability in time (medical application, heat counting, billing meters) CAUTIONS AND WARNINGS ON MOUNTING AND HANDLING Please read the special instructions: see www.vishay.com/doc?29224. PACKAGING Available in 8 mm punched paper tape on reel package of 4000 units (case 0603 and case 0805) and 10 000 (case 0402). DESIGN-IN SUPPORT For complete curve computation, please visit: www.vishay.com/thermistors/ntc-rt-calculator/ ELECTRICAL DATA AND ORDERING INFORMATION R25 (Ω) R25-TOL. (± %) B25/85 (K) B25/85-TOL. (± %) SAP MATERIAL AND ORDERING NUMBER 100 000 1 3590 1 NTCS0805E3104SMT 122 000 1 3590 1 NTCS0603E3124SMT 210 000 1 3590 1 NTCS0402E3214SMT DIMENSIONS in millimeters W T L1 L L2 L3 PARAMETER VALUE Case 0402 0603 0805 L 1 ± 0.15 1.6 ± 0.15 2 ± 0.2 W 0.5 ± 0.15 0.8 ± 0.15 1.25 ± 0.15 T 0.5 ± 0.15 0.8 ± 0.15 0.8 ± 0.15 L1, L3 min. 0.1 0.2 0.2 L2 min. 0.3 0.4 0.55 Note • Non-dimensioned details do not affect the performance of the thermistors Revision: 30-Jun-2021 Document Number: 29151 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCS....E3...SMT www.vishay.com Vishay BCcomponents RELIABILITY INFORMATION After a test of storage at any temperature within the temperature range, the drift of electrical resistance at 25 °C is always lower than ± 0.5 %, which represents a temperature drift less than ± 0.1 °C (see here under typical figures for drift after storage during 10 000 h at maximal temperature 125 °C). The same type of stability is also observed in thermal shocks between the two extreme values of the temperature range. The tests are performed according to IEC 60068-2-2 and 2-14. Axis Title Axis Title 0.6 0.6 10000 Positive threshold 0.4 Positive threshold 0.4 0.3 ▬▬▬ 0.1 ▬▬▬ ▬▬▬ 0 Maximum measured drift Average measured drift Minimum measured drift 1000 1st line 2nd line 0.2 -0.1 -0.2 100 -0.3 2nd line ΔR25/R25 (%) 0.3 2nd line ΔR25/R25 (%) 10000 0.5 ▬▬▬ 0.2 ▬▬▬ 0.1 ▬▬▬ Maximum drift R25 Average drift R25 Minimum drift R25 1000 1st line 2nd line 0.5 0 -0.1 -0.2 100 -0.3 -0.4 -0.4 Negative threshold -0.5 Negative threshold -0.5 -0.6 0 2000 4000 6000 8000 10 10 000 -0.6 0 10 250 500 750 1000 1250 1500 1750 2000 Time (h) Number of Cycles Fig. 1 - R25 °C Drift after Storage at 125 °C for 0603 Case Fig. 3 - R25 °C Drift in Thermal Shocks -40 °C, 15 min/125 °C, 15 min Axis Title 0.6 10000 0.5 Positive threshold 0.4 ▬▬▬ 0.2 ▬▬▬ 0.1 ▬▬▬ Maximum measured drift Average measured drift Minimum measured drift 1000 1st line 2nd line 2nd line ΔR25/R25 (%) 0.3 0 -0.1 -0.2 100 -0.3 -0.4 Negative threshold -0.5 -0.6 0 2000 4000 6000 8000 10 10 000 Time (h) Fig. 2 - Drift in Storage at 125 °C for 0402 Case Revision: 30-Jun-2021 Document Number: 29151 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000