Vishay Dale Electronics, LLC
Information Display Products
OLED Product Data Sheet
OLED SPECIFICATION
Model No:
OLED-016N002D-GPP5N00100
■APPROVAL FOR SPECIFICATIONS ONLY
□APPROVAL FOR SPECIFICATIONS AND
SAMPLE (
)
SPECIFICATION
Version: 0
Model # :
OLED-016N002D-GPP5N00100
Global / SAP # :
O016N002DGPP5N0010
APPROVED BY:
( FOR CUSTOMER USE ONLY )
SALES BY
APPROVED BY
CHECKED BY
RELEASE DATE:
■APPROVAL FOR SPECIFICATIONS ONLY
□APPROVAL FOR SPECIFICATIONS AND SAMPLE
PREPARED BY
MODEL NO：OLED-016N002D-GPP5N00100
RECORDS OF REVISION
VERSION DATE
0
2021/05/10
DOC. FIRST ISSUE
REVISED
SUMMARY
PAGE
NO.
First release
OLED-016N002D-GPP5N00100
Contents
1.Module Classification Information
2.General Specification
3.Contour Drawing & Block Diagram
4.Interface Pin Function
5.Absolute Maximum Ratings
6.Electrical Characteristics
7.Optical Characteristics
8.OLED Lifetime
9.Reliability
10.Inspection Specification
11.Precautions in Use of OLED Modules
OLED-016N002D-GPP5N00100
1.Module Classification Information
OLED- 016 N 002 D- G P P 5 N 0 0 1 00
①
1
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪ ⑫
Brand
Horizontal
Format
Display Type
Vishay Intertechnology, Inc.
16 characters per row
N：COB Character
H：COB Graphic
3
(RoHScompliant)
O：COG
F：COG + FRAME
P：COG + FRAME + PCB
A：COG + PCB
Y：TAB
4
5
Vertical Format
Series code
2 rows of characters
D
A：Amber
B：Blue
G：Green
L：Yellow
R：Red
2
6
Emitting Color
7
Polarizer
8
9
Display Mode
Driver Voltage
10
Touch Panel
11
Products type
12
Inspection Grade
13
Interface
14
Serial No.
⑬
⑭
S：Sky Blue
W：White
X：Dual Color
C：Full Color
P：With Polarizer
N：Without Polarizer
A：Anti-glare Polarizer
P：Passive Matrix;
A: Active Matrix
3: +3.0V / +3.3 V;
5: +5.0V
N: Without TP; T: Resistive TP; D: DCT Attached CTP;
R: OCR Attached CTP; A: OCA Attached CTP
0：Standard type
1：Daylight Readable type
2：Transparent OLED (TOLED)
3：Flexible OLED
4：OLED for Lighting
0：Standard
2：Special grade
C：Automotive grade
Y：Consumer grade
0: Default; 1: COB 6800; 2: COB 8080; 3: COB SPI;
F: COG ZIF FPC; H: COG Hot-bar FPC;
D: Demo Kit; Z: Semi-custom
Application serial number (00~ZZ)
OLED-016N002D-GPP5N00100
2.General Specification
Item
Dimension
Unit
Number of Characters
16 characters x 2 Lines
－
Module dimension
85.0 x 30.0 x 10.0(MAX)
mm
View area
66.0 x 16.0
mm
Active area
56.95 x 11.85
mm
Dot size
0.55 x 0.65
mm
Dot pitch
0.60 x 0.70
mm
Character size
2.95 x 5.55
mm
Character pitch
3.6 x 6.3
mm
Panel type
OLED , Green
Duty
1/16
IC
OLED-0010-TX
Interface
6800
Size
2.29 inch
OLED-016N002D-GPP5N00100
3.Contour Drawing & Block Diagram
85.0 0.5
71.2
66.0(VA)
56.95(AA)
7.65
14
13
2
1
10.0Max
4.8
24.0
16.0(VA)
11.85(AA)
30.0 0.5
7.0
9.08
3.0
15.0
10.25
14.48
43.25
2.0
2.54
2.0
7.38
13
2
1
14- 1.0 PTH
14- 1.8 PAD
0.7
0.65
14
PIN DETAIL
3.6
2.95
0.6
0.55
6.3
5.55
0.75
(P2.54*6)
15.24
4- 2.5 PTH
4- 5.0 PAD
81.0
1.6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Vdd
Vss
NC
RS
R/W
E
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
0.65
The non-specified tolerance of dimension is ±0.3 mm .
DOT SIZES
SCALE 5/1
OLED-016N002D-GPP5N00100
3.1 Application Recommendations
Pin connected to MCU interface: RS, R/W, E, DB0~7
C1：1.0uF (1)
Note
(1) The capacitor value is recommended value. Select appropriate value against module application.
*For more information, please refer to the OLED-0010 video controller datasheet.
OLED-016N002D-GPP5N00100
4.Interface Pin Function
Pin No. Symbol
Level
Description
1
VDD
5.0V
Supply Voltage for logic
2
VSS
0V
Ground
3
NC
－
4
RS
H/L
H: DATA, L: Instruction code
5
R/W
H/L
H: Read(Module→MPU) L: Write(MPU→Module)
6
E
H,H→L
Chip enable signal
7
DB0
H/L
Data bit 0
8
DB1
H/L
Data bit 1
9
DB2
H/L
Data bit 2
10
DB3
H/L
Data bit 3
11
DB4
H/L
Data bit 4
12
DB5
H/L
Data bit 5
13
DB6
H/L
Data bit 6
14
DB7
H/L
Data bit 7
OLED-016N002D-GPP5N00100
5.Absolute Maximum Ratings
Item
Symbol
Min
Max
Unit
Notes
Operating Temperature
TOP
-40
+80
°C
-
Storage Temperature
TST
-40
+85
°C
-
VDD-VSS
-0.3
5.3
V
-
Supply Voltage For Logic
OLED-016N002D-GPP5N00100
6.Electrical Characteristics
6.1 DC Electrical Characteristics
Item
Symbol
Condition
Min
Typ
Max
Unit
Supply Voltage For Logic
VDD-VSS
－
4.8
5.0
5.3
V
Input High Volt.
VIH
－
0.8xVDD
－
VDD
V
Input Low Volt.
VIL
－
GND
－
0.2xVDD
V
Output High Volt.
VOH
IOH=-0.5mA 0.8xVDD
－
VDD
V
Output Low Volt.
VOL
IOL=0.5mA
－
0.2xVDD
V
GND
50% Check Board
IDD
VDD=5V
－
35
52.5
mA
Operating Current
Note: This OLED module is specified for VDD = +5V logic supply & signal levels. When
operating at VDD = +5V, using +3V or +3.3V logic signal levels will cause improper operation.
OLED-016N002D-GPP5N00100
6.2 Initial code
OLED-016N002D-GPP5N00100
OLED-016N002D-GPP5N00100
Notes
Repeated procedures for an 4-bit bus interface
Noise causing transfer mismatch between the four upper and lower bits can be corrected by a reset
triggered by consecutively writing a “0000” instruction five times. The next transfer starts from the
lower four bits and then first instruction “Function set” can be executed normally.
Please insert the synchronization function in the head of procedures. The repeated procedures
are show as follows :
Note: Initial code is for reference only. Please make the best adjustment with the OLED module.
OLED-016N002D-GPP5N00100
7.Optical Characteristics
Item
View Angle
Contrast Ratio
Response Time
Symbol
Condition
Min
Typ
Max
Unit
(V)θ
160
deg
(H)φ
160
deg
－
10,000:1
－
CR
Dark
T rise
－
10
μs
T fall
－
10
μs
cd/m2
Display with 50% check Board Brightness
100
120
CIEx(Green)
(CIE1931)
0.24
0.28
0.32
CIEy(Green)
(CIE1931)
0.59
0.63
0.67
OLED-016N002D-GPP5N00100
8.OLED Lifetime
ITEM
Conditions
Min
Typ
Remark
Operating
Life Time
Ta=25°C
/ Initial 50% check board
brightness 100cd/m2
80,000 Hrs
100,000 Hrs
Note
Notes:
1. Life time is defined the amount of time when the luminance has decayed to 50% of initial value.
4. Current consumption: within ± 50% of initial value.
APPENDIX:
RESIDUAL IMAGE
Because the pixels are lighted in different time, the luminance of active pixels
may reduce or differ from inactive pixels. Therefore, the residual image will occur.
To avoid the residual image, every pixel needs to be lighted up uniformly.
OLED-016N002D-GPP5N00100
10.Inspection Specification
Inspection Standard:
MIL-STD-105E table normal inspection single sample level II.
Definition
1 Major defect : The defect that greatly affect the usability of product.
2 Minor defect : The other defects, such as cosmetic defects, etc.
Definition of inspection zone:
C
B
A
Zone A: Active Area
Zone B: Viewing Area except Zone A
Zone C: Outside Viewing Area
Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble of
quality and assembly to customer`s product.
Inspection Methods
1 The general inspection : Under fluorescent light illumination: 750~1500 Lux, about 30cm
viewing distance, within 45º viewing angle, under 25±5°C.
2 The luminance and color coordinate inspection : By SR-3 or BM-7 or the equal
equipment, in the dark room, under 25±5°C.
NO
Item
01
Electrical
Testing
02
Black or
white spots
on OLED
(display
only)
Criterion
1.1 Missing vertical, horizontal segment, segment contrast defect.
1.2 Missing character, dot, or icon.
1.3 Display malfunction.
1.4 No function or no display.
1.5 Current consumption exceeds product specifications.
1.6 OLED viewing angle defect.
1.7 Mixed product types.
1.8 Contrast defect.
2.1 White and black spots on display ≦0.25mm, no more than
three white or black spots present.
2.2 Densely spaced: No more than two spots or lines within 3mm.
OLED-016N002D-GPP5N00100
AQL
0.65
2.5
NO
Item
OLED black
spots, white
spots,
contaminati
on (nondisplay)
Criterion
3.1 Round type :
As following
drawing
Φ=( x + y ) / 2
AQL
SIZE
Acceptable
QTY
ignore
2
1
0
Φ≦0.10
0.10＜Φ≦0.20
0.20＜Φ≦0.25
0.25＜Φ
Zone
A+ B
A+ B
A+ B
A+ B
2.5
3.2 Line type : (As following drawing)
03
04
Polarizer
bubbles
/Dent
Length
Width
--L≦3.0
L≦2.5
---
W≦0.02
0.02＜W≦0.03
0.03＜W≦0.05
0.05＜W
4.1 If bubbles
are visible,
judge using
black spot
specifications,
not easy to find,
must check in
specify direction.
Size Φ
Φ≦0.20
0.20＜Φ≦0.50
0.50＜Φ≦1.00
1.00＜Φ
Total Q TY
Acceptable
Q TY
ignore
2
Zone
A+B
A+B
A+B
As round type
Acceptable Q TY
ignore
3
2
0
3
Zone
A+B
A+B
A+B
A+B
4.2 The polarizer dent follows this specification.
05
Scratches
Follow NO.3 OLED black spots, white spots, contamination.
OLED-016N002D-GPP5N00100
2.5
2.5
NO
Item
Criterion
AQL
Symbols Define:
x: Chip length
y: Chip width
z: Chip thickness
k: Seal width
t: Glass thickness a: OLED side length
L: Electrode pad length:
6.1 General glass chip :
6.1.1 Chip on panel surface and crack between panels:
06
Chipped
glass
z: Chip thickness
y: Chip width
x: Chip length
Not over viewing area
Z≦1/2t
x≦1/8a
Not exceed 1/3k
1/2t＜z≦2t
x≦1/8a
☉If there are 2 or more chips, x is total length of each chip.
2.5
6.1.2 Corner crack:
z: Chip thickness
y: Chip width
x: Chip length
Not over viewing area
Z≦1/2t
x≦1/8a
Not exceed 1/3k
1/2t＜z≦2t
x≦1/8a
☉If there are 2 or more chips, x is the total length of each chip.
Symbols :
x: Chip length
y: Chip width
z: Chip thickness
k: Seal width
t: Glass thickness a: OLED side length
L: Electrode pad length
6.2 Protrusion over terminal :
6.2.1 Chip on electrode pad :
06
Glass crack
2.5
y: Chip width
y≦0.5mm
x: Chip length
x≦1/8a
OLED-016N002D-GPP5N00100
z: Chip thickness
0 ＜ z≦t
NO
06
Item
Glass crack
Criterion
6.2.2 Non-conductive portion:
y: Chip width
x: Chip length
z: Chip thickness
y≦ L
x≦1/8a
0 ＜ z≦t
☉If the chipped area touches the ITO terminal, over 2/3 of the
ITO must remain and be inspected according to electrode
terminal specifications.
☉If the product will be heat sealed by the customer, the
alignment mark not be damaged.
6.2.3 Substrate protuberance and internal crack.
y: width
y≦1/3L
07
Cracked
glass
08
Backlight
elements
09
10
Bezel
PCB , COB
AQL
2.5
x: length
x≦a
The OLED with extensive crack is not acceptable.
2.5
8.1 Illumination source flickers when lit.
8.2 Spots or scratched that appear when lit must be judged.
Using OLED spot, lines and contamination standards.
8.3 Backlight doesn’t light or color wrong.
9.1 Bezel may not have rust, be deformed or have fingerprints,
stains or other contamination.
9.2 Bezel must comply with job specifications.
10.1 COB seal may not have pinholes larger than 0.2mm or
contamination.
10.2 COB seal surface may not have pinholes through to the IC.
10.3 The height of the COB should not exceed the height
indicated in the assembly diagram.
10.4 There may not be more than 2mm of sealant outside the
seal area on the PCB. And there should be no more than
three places.
10.5 No oxidation or contamination PCB terminals.
10.6 Parts on PCB must be the same as on the production
characteristic chart. There should be no wrong parts, missing
parts or excess parts.
10.7 The jumper on the PCB should conform to the product
characteristic chart.
10.8 If solder gets on bezel tab pads, OLED pad, zebra pad or
screw hold pad, make sure it is smoothed down.
0.65
2.5
OLED-016N002D-GPP5N00100
0.65
2.5
0.65
2.5
2.5
0.65
2.5
2.5
0.65
0.65
2.5
NO
11
12
Item
Soldering
General
appearance
Criterion
11.1 No un-melted solder paste may be present on the PCB.
11.2 No cold solder joints, missing solder connections, oxidation
or icicle.
11.3 No residue or solder balls on PCB.
11.4 No short circuits in components on PCB.
12.1 No oxidation, contamination, curves or, bends on interface
Pin (OLB) of TCP.
12.2 No cracks on interface pin (OLB) of TCP.
12.3 No contamination, solder residue or solder balls on product.
12.4 The IC on the TCP may not be damaged, circuits.
12.5 The uppermost edge of the protective strip on the interface
pin must be present or look as if it cause the interface pin to
sever.
12.6 The residual rosin or tin oil of soldering (component or chip
component) is not burned into brown or black color.
12.7 Sealant on top of the ITO circuit has not hardened.
12.8 Pin type must match type in specification sheet.
12.9 OLED pin loose or missing pins.
12.10 Product packaging must the same as specified on
packaging specification sheet.
12.11 Product dimension and structure must conform to product
specification sheet.
OLED-016N002D-GPP5N00100
AQL
2.5
2.5
2.5
0.65
2.5
0.65
2.5
2.5
2.5
2.5
2.5
0.65
0.65
0.65
0.65
Check Item
Classification
No Display
Major
Missing Line
Major
Pixel Short
Major
Darker Short
Major
Wrong Display
Major
Un-uniform
B/A x 100% < 70%
A/C x 100% < 70%
Major
OLED-016N002D-GPP5N00100
Criteria
11.Precautions in Use of OLED Modules
General
(1) Avoid shock / impact to the module, or making any alterations or modifications.
(2) Do not drill holes in the printed circuit board, change the components, or otherwise modify
the OLED display module.
(3) Do not disassemble the OLED display module.
(4) Do not apply input signals while the logic power is off. This will cause electrical overstress.
(5) Do not operate beyond the absolute maximum rating.
(6) Do not drop, bend, or twist OLED display module.
(7) Solder only to the I/O terminals.
(8) Hot-bar FPC soldering condition: 280-350C, less than 5 seconds.
(9) The manufacturer has the right to change components. (Resistors, capacitors and other
passive components may have different appearance from different suppliers.)
(10) The manufacturer has the right to revise the PCB to ensure supply stability, optimization,
product performance, etc., which does not affect electrical characteristics or outline
dimensions. The manufacturer has the right to modify the product revision.
(11) The manufacturer has the right to upgrade or modify the product function.
(12) For OLED products with chip-on-glass (COG) & chip-on-flex (COF) construction, ability to
adjust the panel driving voltage VCC (VPP) in the application circuit or software is
recommended. Potential improvements to OLED light-emitting material efficiencies may
require adjustment of the panel driving voltage. The brightness may be otherwise adjusted
as needed.
11.1. Handling Precautions
(1) The display panel is made of glass, avoid mechanical impacts such as dropping or striking.
(2) If the display panel is broken and the internal organic material leaks, use care not to inhale
or ingest the organic substance.
(3) If pressure is applied to the OLED display module or surrounding hardware, the OLED cell
structure may be damaged.
(4) The polarizer on the view surface of the OLED display module is soft and easily scratched.
(5) If the view surface is soiled, it might be cleaned using the following adhesive tape.
* Scotch Mending Tape No. 810 or an equivalent
Do not breathe upon the soiled surface or wipe using cloth containing solvents (e.g.; ethyl
alcohol), else the surface of the polarizer may cloud.
Avoid the following liquids / solvents to prevent damage to the polarizer:
* Water
* Ketone
* Aromatic Solvents
(6) Protective film is applied to the surface of the display panel. Remove the protective film
before assembly. After extended storage, adhesive residue from the protective film may
remain after the film is removed. If so, try removing the adhesive residue using adhesive
tape as described above.
(7) Do not touch the following sections while handling the OLED display modules.
* Pins, terminations, and electrodes
* Circuitry such as components or PCB / TCP / FPC conductors or traces.
(8) Hold OLED display module carefully by the edges when placing OLED display module into
the system enclosure. Do not apply excessive stress or pressure to OLED display module.
Do not crease the film. Do not bend the film near terminations or components. Ensure
OLED-016N002D-GPP5N00100
that the mounting hardware and enclosure have sufficient rigidity.
(9) Do not apply stress to the LSI chips or surrounding moldings.
(10) Handle only in ESD-safe environments to prevent damage by static electricity.
* The operator/handler must be grounded, and proper attire/clothing must be worn.
* Tools, workstations, and equipment (e.g.; soldering irons) must be grounded.
* Suppress generation of static electricity by controlling humidity and using air ionizers.
* Protective film is applied to the surface of the OLED display module. Use caution when
removing the protective film as it will generate static electricity.
11.2. Storage Precautions
(1) When storing OLED display modules, place in static (ESD) protective bags or enclosures,
and avoid exposure to sun or fluorescent lights. Store in original packaging as possible.
(2) Store in clean, temperature & humidity controlled environments (25±5°C and
