ORN (Divider)
www.vishay.com
Vishay Dale Thin Film
Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider,
Surface Mount Resistor Network
FEATURES
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder (JEDEC® MS-012 variation AA
package)
• Low TCR tracking ± 5 ppm/°C
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Actual Size
Vishay Dale Thin Film ORN series Dividers provide optimum
ratio precision, small size and exceptional stability for most
applications. They offer a wide ratio range that is listed in the
selection guide and are available for immediate delivery. The
tight ratio tolerance offered on the standard ratios will
provide exceptional performance throughout life.
SCHEMATIC
R1
7
R2
1
6
R2
2
5
TYPICAL PERFORMANCE
TCR
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
STANDARD RESISTANCE OFFERING (R1/R2)
RATIO
100:1
50:1
25:1
20:1
10:1
5:1
2:1
R1
3
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
TOL.
8
Available
4
R1
100K
50K
25K
20K
10K
10K
10K
R2
1K
1K
1K
1K
1K
2K
5K
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Passivated nichrome
8
1000 Ω to 100 kΩ per resistor
± 25 ppm/°C
± 5 ppm/°C
± 0.1 %
± 0.05 %
100 mW
400 mW
ΔR ± 0.05 %
ΔR ± 0.015 %
< 0.1 ppm/V
100 V max. not to exceed P x R
-55 °C to +125 °C
-55 °C to +150 °C
< -30 dB
0.08 μV/°C
ΔR ± 0.01 %
ΔR ± 0.002 %
CONDITIONS
-55 °C to +125 °C
-55 °C to +125 °C
+25 °C
+25 °C
Maximum at +70 °C
Maximum at +70 °C
2000 h at +70 °C
2000 h at +70 °C
1 year at +25 °C
1 year at +25 °C
Note
• Tantalum nitride film is custom, consult factory
Revision: 17-Sep-12
Document Number: 60006
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORN (Divider)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
E
B
INCHES
MILLIMETERS
Part
Number
C
F
ORNA x-x
A
DIMENSION
G
Date
Code
D
ø
H
I
A
0.154 ± 0.003
3.90 ± 0.09
B
0.016 ± 0.002
0.4 ± 0.06
C
0.050
1.27
D
0.193 ± 0.004
4.90 ± 0.1
E
0.008 ± 0.001
0.20 ± 0.03
F
0.032 ± 0.016
0.81 ± 0.4
G
0.236 ± 0.008
6.00 ± 0.2
H
0.068 max.
1.73
I
0.007 ± 0.003
0.18 ± 0.07
Ø
2° to 6°
2° to 6°
Note
• Marking - Vishay symbol, part number from ordering information
MECHANICAL SPECIFICATIONS
100
Passivated nichrome
Substrate Material
Precent of Rated Power
Resistive Element
DERATING CURVE
Silicon
Body
Molded epoxy
Terminals
Copper alloy
Lead (Pb)-free Option
100 % matte tin
Tin Lead Option
Sn90
Tin Lead and Lead (Pb)-free Finish
Plated
100 % = 0.40 W
80
60
40
20
0
0
70
125
150
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: ORNA5-1UF
O
R
N
A
R
N
T
A
O
GLOBAL MODEL
(4 or 5 digits)
ORNA
(Tin/lead)
1
5
-
1
0
0
-
RESISTANCE
(3, 4 or 5 digits)
2-1
5-1
10-1
20-1
25-1
50-1
100-1
ORNTA
(Lead (Pb)-free)
(e3)
1
U
F
U
F
PACKAGING
TAPE AND REEL
T0 = 100 min., 100 mult.
T1 = 1000 min., 1000 mult.
T3 = 300 min., 300 mult.
T5 = 500 min., 500 mult.
TF = full reel 3000
TS = 100 min., 1 mult.
UF = TUBED
Historical Part Number Example: ORNA2-1 (for reference purposes only)
ORNA2-1
2:1
10K
5K
2
PART NUMBER
DIVIDER NETWORK
R1 VALUE
R2 VALUE
R1/R2 RATIO
Revision: 17-Sep-12
Document Number: 60006
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000