ORNTA5-1T1

ORN (Divider) www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider, Surface Mount Resistor Network FEATURES • 0.068" (1.73 mm) maximum seated height • Rugged molded case construction with no internal solder (JEDEC® MS-012 variation AA package) • Low TCR tracking ± 5 ppm/°C • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Actual Size Vishay Dale Thin Film ORN series Dividers provide optimum ratio precision, small size and exceptional stability for most applications. They offer a wide ratio range that is listed in the selection guide and are available for immediate delivery. The tight ratio tolerance offered on the standard ratios will provide exceptional performance throughout life. SCHEMATIC R1 7 R2 1 6 R2 2 5 TYPICAL PERFORMANCE TCR ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO 0.1 0.05 STANDARD RESISTANCE OFFERING (R1/R2) RATIO 100:1 50:1 25:1 20:1 10:1 5:1 2:1 R1 3 Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details TOL. 8 Available 4 R1 100K 50K 25K 20K 10K 10K 10K R2 1K 1K 1K 1K 1K 2K 5K STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio SPECIFICATIONS Passivated nichrome 8 1000 Ω to 100 kΩ per resistor ± 25 ppm/°C ± 5 ppm/°C ± 0.1 % ± 0.05 % 100 mW 400 mW ΔR ± 0.05 % ΔR ± 0.015 % < 0.1 ppm/V 100 V max. not to exceed P x R -55 °C to +125 °C -55 °C to +150 °C < -30 dB 0.08 μV/°C ΔR ± 0.01 % ΔR ± 0.002 % CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C Maximum at +70 °C Maximum at +70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at +25 °C 1 year at +25 °C Note • Tantalum nitride film is custom, consult factory Revision: 17-Sep-12 Document Number: 60006 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORN (Divider) www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters E B INCHES MILLIMETERS Part Number C F ORNA x-x A DIMENSION G Date Code D ø H I A 0.154 ± 0.003 3.90 ± 0.09 B 0.016 ± 0.002 0.4 ± 0.06 C 0.050 1.27 D 0.193 ± 0.004 4.90 ± 0.1 E 0.008 ± 0.001 0.20 ± 0.03 F 0.032 ± 0.016 0.81 ± 0.4 G 0.236 ± 0.008 6.00 ± 0.2 H 0.068 max. 1.73 I 0.007 ± 0.003 0.18 ± 0.07 Ø 2° to 6° 2° to 6° Note • Marking - Vishay symbol, part number from ordering information MECHANICAL SPECIFICATIONS 100 Passivated nichrome Substrate Material Precent of Rated Power Resistive Element DERATING CURVE Silicon Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated 100 % = 0.40 W 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ORNA5-1UF O R N A R N T A O GLOBAL MODEL (4 or 5 digits) ORNA (Tin/lead) 1 5 - 1 0 0 - RESISTANCE (3, 4 or 5 digits) 2-1 5-1 10-1 20-1 25-1 50-1 100-1 ORNTA (Lead (Pb)-free) (e3) 1 U F U F PACKAGING TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel 3000 TS = 100 min., 1 mult. UF = TUBED Historical Part Number Example: ORNA2-1 (for reference purposes only) ORNA2-1 2:1 10K 5K 2 PART NUMBER DIVIDER NETWORK R1 VALUE R2 VALUE R1/R2 RATIO Revision: 17-Sep-12 Document Number: 60006 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000