OSOPTC1002AT0

OSOP www.vishay.com Vishay Dale Thin Film Molded, 25 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network FEATURES OSOP Series resistor networks feature a space saving 25 mil lead pitch versus the current 50 mil pitch standard. This allows users to reduce board space more than 50 % over current standards. The OSOP series features 16, 20, and 24 pin variations with isolated and last pin common schematics. Custom schematics and resistor values are also available, consult factory. R2 R3 Available Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details TYPICAL PERFORMANCE SCHEMATIC R1 • 0.068" (1.73 mm) maximum seated height • Rugged molded case construction with no internal solder • JEDEC® MO-137 variation AB = 16 pin, AD = 20 pin, AE = 24 pin • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 R4 R5 R6 R7 R8 R9 R10 R11 R12 OSOP 16 B OSOP 20 A OSOP 24 C TCR TOL. ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO 0.1 0.05 STANDARD RESISTANCE OFFERING (R1 =) OSOP 16 E OSOP 20 D OSOP 24 F 500  10 k 1 k 20 k 2 k 50 k 5 k 100 k Note • Consult factory for additional values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin / Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 23-Apr-2019 SPECIFICATIONS Passivated nichrome 16, 20, 24 500  to 100 k per resistor ± 25 ppm/°C ± 5 ppm/°C ± 0.1 % to ± 1 % ± 0.025 % to ± 0.5 % 100 mW 400 mW R ± 0.05 % R ± 0.015 % < 0.1 ppm/V (typical) 100 V max. not to exceed P x R -55 °C to +125 °C -55 °C to +150 °C < -30 dB 0.08 μV/°C R ± 0.01 % R ± 0.002 % CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C Maximum at +70 °C Maximum at +70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at +25 °C 1 year at +25 °C Document Number: 60002 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 OSOP www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION A A J D Logo E Part Number Marking C B PIN 1 Locator I F Date Code H INCHES MILLIMETERS 16 pin 0.193 ± 0.003 4.90 20, 24 pin 0.341 ± 0.003 8.66 B 0.154 3.91 C 0.237 6.02 D 0.025 0.635 E 0.010 ± 0.002 0.25 ± 0.05 1.58 F 0.062 G 0.068 1.73 H 0.010 ± 0.002 0.25 ± 0.05 G J I 0.025 0.64 16 pin 0.009 0.23 20 pin 0.057 1.47 24 pin 0.033 0.838 MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated GLOBAL PART NUMBER INFORMATION New Global Part Numbering: OSOPA1002BUF O GLOBAL MODEL (4 or 5 digits) OSOP (Tin Lead) OSOPT (Lead (Pb)-free) (e3) O S O P A 1 0 0 2 B U F S O P T A 1 0 0 3 A T 1 SCHEMATIC RESISTANCE A = 20 pin 10 isolated resistors B = 16 pin 8 isolated resistors C = 24 pin 12 isolated resistors First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. Example: 1002 = 10K 1003 = 100K D = 20 pin 19 resistors pin 20 common E = 16 pin 15 resistors pin 16 common F = 24 pin 23 resistors pin 24 common TOLERANCE AND RATIO TOLERANCE Abs. Tol.  A = 0.1 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Z = 0.1 % (1) Ratio  0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.025 % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult  UF = TUBED Historical Part Number example: OSOPA5000B (for reference purposes only) OSOP A 5000 B SERIES SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Notes (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 23-Apr-2019 Document Number: 60002 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000