P16SNP472MAB15

P16S, PA16S www.vishay.com Vishay Sfernice Knob Potentiometer With Switch FEATURES • P16S - version for military, professional and industrial applications (cermet): 1 W at 40 °C • PA16S - version for professional audio applications (conductive plastic): 0.5 W at 40 °C • Compact (integrated) • Detent and electric cut off at beginning of travel LINKS TO ADDITIONAL RESOURCES • Fully sealed and panel sealed 3D 3D • Metallic or plastic knob options 3D Models Capabilities and Custom Options • Custom knob on request The P16S is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting hardware and terminals are situated on the back side of the panel reducing to a minimum the required clearance. • Test according to CECC 41000 or IEC 60393-1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Multiple module Switch module Detent module Special electrical laws Sealing level Lifespan No Yes Yes A: linear, L: logarithmic, F: reverse logarithmic IP 67 10K cycles (switch), 50K cycles (track) DIMENSIONS in millimeters (± 0.5 mm) P16SNP P16SNM Thickness nut 2 mm washer 1.5 mm Panel sealing ring 12 wrench Thread M10 x 0.75 9.6 8.8 PANEL CUTOUT Thickness nut 2 mm washer 1.5 mm 10.2 9.4 Panel sealing ring 12 wrench Thread M10 x 0.75 + 0.1 8.1 + 0 7.2 13.5 ± 1 15.5 ± 1 b 7.2 13.5 ± 1 15.5 ± 1 Reference mark 1.8 ø 10 + 0.1 3 terminals +0 0.3 Panel thickness max.: 3 mm 30 a c 8 Ø 16 Document Number: 51063 1 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 25-Jul-2022 P16S, PA16S www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Electrical travel P16S PA16S Cermet Conductive plastic 220° ± 10° 220° ± 10° 1.25 P16S LIN. TAPER “A” Power rating chart 0.75 P16S LOG. TAPER “L & F” NM 0.50 & PA16S LIN. TAPER 0.25 NP RETED POWER IN W 1.00 0 NP NP 20 0 NM NM PA16S LOG. TAPER 60 40 80 120 100 140 AMBIENT TEMPERATURE IN °C a Circuit diagram c (1) (3) b (2) cw Switch on-off 100 % TOTAL RESISTANCE 80 Taper F 60 A L 40 20 0 0 10 20 40 60 80 100 % CLOCKWISE KNOB ROTATION Resistance range linear law logarithmic laws Standard series e3 Tolerance Power rating Temperature coefficient (typical) 22 Ω to 10 MΩ 1 kΩ to 1 MΩ 100 Ω to 2.2 MΩ 470 Ω to 500 kΩ 1 - 2.2 - 4.7 and on request 1 - 2 - 5 1 - 2.2 - 4.7 standard ± 20 % ± 20 % on request ± 10 % ± 10 % (1 kΩ to 100 kΩ) linear logarithmic 1 W at +40 °C 0.5 W at +40 °C 0.5 W at +40 °C 0.25 W at +40 °C ± 150 ppm ± 500 ppm Dielectric strength (RMS) 2500 V 2500 V Limiting element voltage (linear law) 350 V 350 V 3 % Rn or 3 Ω 2 % Rn or 3 Ω 1Ω 1Ω Contact resistance variation End resistance (typical) Insulation resistance (500 VDC) 106 MΩ 106 MΩ Document Number: 51063 2 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 25-Jul-2022 P16S, PA16S www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical travel Operating torque End stop torque Tightening torque of mounting nut Unit weight 300° ± 5° 2 Ncm typical 25 Ncm maximum 180 Ncm maximum 4.5 g typical ENVIRONMENTAL SPECIFICATIONS Temperature range Climatic category Sealing Protection grades METALLIC KNOB PLASTIC KNOB -40 °C to +125 °C -40 °C to +85 °C 40/100/56 40/85/56 Sealed container and panel sealed IP67 SWITCH ELECTRICAL AND MECHANICAL SPECIFICATIONS ON / OFF switch Switching current Switch actuation torque Switch actuation travel Dielectric strength terminal to terminal (RMS) Insulation resistance between contacts Switch mechanical endurance 1 cycle Actuation in counter clockwise position (between terminal a and terminal b) P16S 100 mA max. PA16S 1 mA max. 3 Ncm typical 30° ± 5° 1000 V 106 MΩ 10 000 cycles ON-OFF-ON Note • Nothing stated herein shall be construed as a guarantee of quality or durability MARKING CONTROL KNOB • Ohmic value code, tolerance, code and taper • Manufacturing date code Black metallic knob (NM). Black plastic knob (NP). For white, blue, red, and yellow color see ordering information. Other dimensions, shape, marking, colors of control knobs are manufactured on request - please consult Vishay. Other reference marks (shapes, colors) and legends can be printed on plastic knob on request - please consult Vishay. PACKAGING • Carton box of 20 pieces STANDARD RESISTANCE ELEMENT DATA P16S CERMET PA16S CONDUCTIVE PLASTIC STANDARD LINEAR TAPER LOGARITHMIC TAPER LINEAR TAPER LOGARITHMIC TAPER RESISTANCE MAX. MAX. CUR. MAX. CUR. MAX. MAX. CUR. MAX. MAX. CUR. MAX. MAX. MAX. MAX. MAX. VALUES THROUGH THROUGH POWER THROUGH POWER THROUGH POWER POWER VOLTAGE VOLTAGE VOLTAGE VOLTAGE WIPER WIPER AT 40 °C WIPER AT 40 °C WIPER AT 40 °C AT 40 °C Ω W V mA W V mA W V mA W V mA 22 1 4.69 213 47 1 6.85 146 100 1 10 100 0.5 7.1 71 220 1 14.8 67.4 0.5 10.5 48 470 1 21.7 46.1 0.5 15.3 32.6 0.25 10.8 23.1 1K 1 31.6 31.6 0.5 22.4 22.4 0.5 22.4 22.4 0.25 15.8 16 2.2K 1 46.9 21.3 0.5 33.2 15.1 0.5 33.2 15.1 0.25 23.5 11 4.7K 1 68.5 14.6 0.5 48.5 10.3 0.5 48.5 10.3 0.25 34.3 7 10K 1 100 10 0.5 70.7 7.07 0.5 70.7 7.07 0.25 50 5 22K 1 148 6.74 0.5 105 4.77 0.5 105 4.77 0.25 74 3.4 47K 1 217 4.61 0.5 153 3.26 0.5 153 3.26 0.25 108 2.3 100K 1 316 3.16 0.5 224 2.24 0.5 224 2.24 0.25 158 1.6 220K 0.56 350 1.59 0.5 332 1.51 0.5 332 1.51 0.25 235 1.1 470K 0.26 350 0.75 0.26 350 0.74 0.26 350 0.74 0.25 343 0.7 1M 0.12 350 0.35 0.12 350 0.35 0.12 350 0.35 2.2M 0.05 350 0.16 0.056 350 0.16 4.7M 0.02 350 0.07 10M 0.01 350 0.012 Document Number: 51063 3 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 25-Jul-2022 P16S, PA16S www.vishay.com Vishay Sfernice PERFORMANCE TESTS TYPICAL VALUES AND DRIFTS CONDITIONS Electrical endurance ΔRT/RT (%) ΔR1-2/R1-2 (%) OTHER 1000 h at rated power 90'/30' cycle at +40 °C ±5% - Insulation resistance: > 104 MΩ Contact res. variation: < 2 % Rn 56 days 40 °C, 93 % HR ±2% ±1% Insulation resistance: > 104 MΩ 50 000 cycles ±5% - Contact res. variation: < 2 % Rn 50 g‘s at 11 ms 3 successive shocks in 3 dimensions ± 0.2 % ± 0.5 % - 10 Hz to 55 Hz 0.75 mm or 10 g‘s during 6 h ± 0.2 % - ΔV1-2/ΔV1-3 ≤ ± 0.5 % Damp heat, steady state Mechanical endurance Shock Vibration ORDERING INFORMATION P 1 6 S N 2 2 OHMIC VALUE MODEL STYLE P16S = cermet NM: metallic black NP: plastic black WM: metallic white WP: plastic white BP: plastic blue RP: plastic red YP: plastic yellow PA16S = conductive plastic P 223 = 22 kΩ for ohmic value range see electrical specification 3 M A B 1 TOLERANCE TAPER M = ± 20 % A: linear L: clockwise logarithmic F: inverse clockwise logarithmic On request: K = ± 10 % 5 PACKAGING CODE SPECIAL NUMBER B15 = Box of 20 pieces (If applicable) Given by Vishay for custom design PART NUMBER DESCRIPTION (for information only) P16S NP 22 kΩ 20 % A MODEL STYLE OHMIC VALUE TOLERANCE TAPER BO20 SPECIAL PACKAGING e3 SPECIAL LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Capabilities and Custom Options www.vishay.com/doc?48493 Document Number: 51063 4 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 25-Jul-2022 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000