PAC300005000FAC000

PAC.. Series www.vishay.com Vishay Draloric Cemented Leaded Wirewound Precision Resistors FEATURES • High power dissipation in small volume • Ideal for pulse application • TCR ± 100 ppm/K • Maximum permissible hot spot temperature is 275 °C • Lead (Pb)-free • Tolerance 1 % • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The resistor element is a resistive wire which is wound in a single layer on a ceramic rod. Metal caps are pressed over the ends of the rod. The ends of the resistance wire and the leads are connected to the caps by welding. Tinned copper-clad iron leads with poor heat conductivity are employed permitting the use of relatively short leads to obtain stable mounting without overheating the solder joint. The resistor is coated with a green silicon cement which is not resistant to aggressive fluxes. The coating is non-inflammable, will not drip even at high overloads and is resistant to most commonly used cleaning solvents, in accordance with IEC 60 068-2-45. STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING P25 °C W LIMITING VOLTAGE Umax. RESISTANCE RANGE (2)  TOLERANCE ±% PAC01 1 P x R 0.10 to 2.2K 1 2 P x R 0.10 to 3.6K 1 PAC03 3 P x R 0.10 to 4.7K 1 PAC04 4 P x R 0.10 to 8.2K 1 PAC05 5 P x R 0.10 to 12K 1 PAC06 6 P x R 0.10 to 12K 1 PAC02 (1) Notes • For Pulse Diagrams see AC.. Series (www.vishay.com/doc?28730) (1) PAC02 WSZ: P 25 °C = 1.8 W (2) Resistance value to be selected for ± 1 % tolerance from E24 and E96 Revision: 14-Mar-17 Document Number: 28731 1 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAC.. Series www.vishay.com Vishay Draloric PART NUMBER AND PRODUCT DESCRIPTION Part Number: PAC300004701FAC000 P A C 3 0 0 0 0 4 7 0 MODEL VARIANT TCR/MATERIAL VALUE PAC100 = PAC01 PAC200 = PAC02 PAC300 = PAC03 PAC400 = PAC04 PAC500 = PAC05 PAC600 = PAC06 0 = neutral 1 = SWI = Special winding (1) 2 = RT 3 = DK SP 20 mm 4 = DK LP 33 mm (2) 5 = DK LP 17.8 mm (2) 7 = DK LP 25.4 mm (2) 8 = DK SP 25.4 mm 9 = WSZ 6720 C = E/K 25.4 mm (2) Z = value overflow (special) 0 = standard (± 100 ppm/K) 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 1 F A C 0 0 TOLERANCE PACKAGING CODE CODE F = ± 1.0 % (see Packaging table) 0 SPECIAL The 3 digits are used for all special part styles. To encode the non standard specifications all special parts of one series are listed in a cross reference table. 000 = standard Product Description: PAC03 4K7 1 % AC PAC03 4K7 1% AC MODEL (3) VALUE (3) TOLERANCE CODE (3) PACKAGING DESCRIPTION (4) Notes (1) Special winding on request (2) Other dimensions on request (3) See “Part Number and Product Description” (4) See “Packaging Table” PACKAGING TABLE AMMO MODEL PAC01 LOOSE PIECES PACK CODE PACK. DESC. 1000 A1 A1 PAC01 DK/EK PAC01RT 2500 AE AE PAC02 500 AC AC PAC02 DK/EK BLISTER PIECES PACK CODE PACK. DESC. 500 LC LC 500 LC LC PAC02 WSZ PAC03 500 AC 500 AC 500 AC PAC06 DK/EK Revision: 14-Mar-17 500 AC 1250 BM BM 500 LC LC 500 LC LC 250 LB LB 250 LB LB AC PAC05 DK/EK PAC06 PACK. DESC. AC PAC04 DK/EK PAC05 PACK CODE AC PAC03 DK/EK PAC04 PIECES AC Document Number: 28731 2 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAC.. Series www.vishay.com Vishay Draloric DIMENSIONS in millimeters [inches] G D L x (Lacquer) d Xmax. G WEIGHT g PER UNIT 11 [0.433] 2 63 ± 1 [2.480 ± 0.039] 0.52 4.8 [0.189] 13 [0.512] 2 63 ± 1 [2.480 ± 0.039] 0.75 PAC03 5.5 [0.217] 16.5 [0.650] 3 63 ± 1 [2.480 ± 0.039] 1.10 PAC04 7.5 [0.295] 18 [0.709] 3 73 ± 1 [2.874 ± 0.039] 1.90 PAC05 7.5 [0.295] 26 [1.024] 3 73 ± 1 [2.874 ± 0.039] 2.60 PAC06 7.5 [0.295] 26 [1.024] 3 73 ± 1 [2.874 ± 0.039] 2.60 MODEL Dmax. Lmax. PAC01 4.3 [0.169] PAC02 d 0.8 ± 0.03 [0.031 ± 0.001] Note • For packaging dimensions see: www.vishay.com/doc?28721 Revision: 14-Mar-17 Document Number: 28731 3 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAC.. Series www.vishay.com Vishay Draloric BENDING FORMS L ØD KINK TYPE S = EK Ød h S TYPE Ød P Ø Dmax. L h±1 P±1 Smax. 17.8 PAC01 PAC02 - PAC04 (1) 0.8 (1) 8 25.4 PAC05 - PAC06 2 33.0 P1 ØD L Ød h DOUBLE KINK SP = DK SP c S TYPE ØD ØB L Ø Dmax. h±1 PAC01 PAC02 - PAC04 0.8 (1) P2 (1) P1 ± 1 P2 ± 3 19.8 17.8 22.0 20.0 27.4 25.4 35.0 33.0 Smax. ØB c 2 1.0 ± 0.1 4.5 ± 1 Smax. ØB c 2 1.0 ± 0.1 4.5 ± 1 8 PAC05 - PAC06 P1 ØD L Ød h DOUBLE KINK LP = DK LP c S TYPE ØD Ø Dmax. L h±1 PAC01 - PAC02 PAC02 - PAC04 0.8 PAC05 - PAC06 (1) P2 ØB (1) 8 P1 ± 1 P2 ± 3 17.8 17.8 25.4 25.4 33.0 33.0 Note (1) See table DIMENSIONS Revision: 14-Mar-17 Document Number: 28731 4 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAC.. Series www.vishay.com Vishay Draloric BENDING FORMS A L a I ØD WSZ b H F E Solder pad dimensions Ød TYPE Ød Ø Dmax. A L F H E a b l PAC02 WSZ 0.8 (1) 17 ± 0.5 11 - 12 4.8 ± 0.5 3.6 ± 0.5 5.0 ± 0.5 2.5 5.5 14.5 Δh1 P P2 ØD L H1 H H0 1 max. W2 d RADIAL TAPED = RT t L1 P1 F W0 W1 W P0 D0 Direction of Unreeling TYPE PAC01 Lead Ø Ød 0.8 Diameter ØD (1) L (1) P 12.7 ± 1.0 Length Pitch of components Pitch of spocket holes (2) P0 12.7 ± 0.3 Distance between hole center and resistor center P1 3.85 ± 0.7 Distance between hole center and lead center P2 6.35 ± 1.0 F 5.0 + 0.6, - 0.1 Lead spacing h1 2 max. Width of carrier tape W 18.0 ± 0.5 Width of adhesive tape W0 12.0 ± 0.5 Position of holes W1 9.0 ± 0.5 Position of adhesive tape Angle of insertion W2 0.5 max. Body to hole center H 19.5 ± 1.0 Lead crimp to hole center (3) H0 16.0 ± 0.5 Hole Ø D0 4.0 ± 0.2 t 0.9 max. Height for cutting L1 11 max. Height for insertion H1 32 max. Thickness of tape (4) Notes (1) See table DIMENSIONS (2) Test over 10 holes - 9 intervals P 12.7 x 9 = 114.3 ± 0.5 0 (3) Parallelism, < 0.5 mm (4) Thickness of carrier tape: 0.55 mm ± 0.1 Revision: 14-Mar-17 Document Number: 28731 5 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAC.. Series www.vishay.com Vishay Draloric RATED POWER IN % DERATING 100 80 60 40 20 0 0 50 25 100 150 200 250 300 AMBIENT TEMPERATURE IN °C Maximum dissipation (Pmax.) as a function of the ambient temperature (Tamb) PERFORMANCE TEST Climatic category (LCT/UCT/Days) PERMISSIBLE CHANGE 55/200/56 Climatic Sequence IEC 60115-1 4.23 R = ± (0.5 % R + 0.05 ) Damp Heat, Steady State, IEC 60115-1, 4.24 (40 ± 2) °C, 56 days, (93 ± 3) % RH R = ± (1.0 % R + 0.05 ) Endurance at room temperature (116 % P70), 1000 h, IEC 60115-1, 4.25.2 R = ± (0.5 % R + 0.05 ) Storage, UCT, IEC 60115-1, 4.25.3 1000 h, 200 °C, no load R = ± (1.0 % R + 0.05 ) Resistance to Soldering Heat, IEC 60115-1, 4.18 (260 ± 5) °C, (10 ± 1) s R = ± (0.2 % R + 0.05 ) Robustness of Termination, IEC 60115-1, 4.16 10N R = ± (0.1 % R + 0.05 ) Short Time Overload, IEC 60115-1, 4.13 10 x Rated Power for 5 s R = ± (0.2 % R + 0.05 ) Revision: 14-Mar-17 Document Number: 28731 6 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAC.. Series www.vishay.com Vishay Draloric HISTORICAL 12NC INFORMATION • The resistors had a 12-digit ordering code staring with 2306 327 • The subsequent first digit indicated the resistor type and packaging. • The remaining 4 digits indicated the resistance value: - The first 3 digits indicated the resistance value. - The last digit indicated the resistance decade in accordance with Resistance Decade table. Resistance Decade RESISTANCE DECADE LAST DIGIT 0.10 to 0.976  7 1 to 9.76  8 10 to 97.6  9 100 to 976  1 1 to 9.76 k 2 10 to 12 k 3 Ordering Example The ordering code for an PAC02, resistor value 47  with ± 1 % tolerance, supplied in ammopack of 500 units was:  2306 327 04709. HISTORICAL 12NC - Resistor type and packaging 2306 327 ..... BANDOLIER IN AMMOPACK TYPE RADIAL 2500 units (1) STRAIGHT LEADS 500 units 1 000 units -  327 5.... PAC01 RT PAC02 -  327 0.... - PAC03 -  327 1.... - PAC04 -  327 2.... - PAC05 -  327 3.... - PAC06 -  327 4.... - Note (1) Radial parts with tin plated copper leads Revision: 14-Mar-17 Document Number: 28731 7 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000