PAT0805E1350BST1

PAT www.vishay.com Vishay Dale Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, Hi-Rel COTS FEATURES • • • • • • These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated enhanced tantalum nitride resistor film to give superior performance on moisture resistance, electrostatic discharge, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. Both, lead (Pb)-free solder (standard) and tin / lead solder (non-standard) options are available. This product will out-perform all requirements of AEC-Q200. Additional custom lot screening per MIL-PRF-55342 available upon request. Contact product marketing for an estimate. CONSTRUCTION Passivation Tantalum Nitride Resistive Film Solder Coating • • • • • • • • Resistance range: 2.5 Ω to 3 MΩ AEC-Q200 qualified AEC-Q200 ESD rated class 1C (2 kV) Available Laser trimmed to any value Moisture resistant to MIL-STD-202, method 202 Available Tantalum nitride resistor film on high purity alumina substrate 100 % visual inspected per MIL-PRF-55342 Available 2 kV (HBM) ESD rating Sn / Pb solder version available Laser-trimmed tolerances to ± 0.1 % Load life stability < 0.05 % at 1000 h at 70 °C Very low noise and voltage coefficient (< -30 dB, < 0.1 ppm/V) Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details TYPICAL PERFORMANCE ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride 2.5 Ω to 3 MΩ ± 25 ppm/°C to ± 100 ppm/°C ± 0.1 % to ± 1.0 % ± 0.05 % Not applicable Less than 0.1 ppm/V 75 V to 200 V -55 °C to +155 °C -55 °C to +155 °C < -30 dB 100 ppm CONDITIONS -55 °C to +125 °C +25 °C 2000 h at 70 °C rated power 1 year at 25 °C COMPONENT RATINGS CASE SIZE 0402 0603 0805 1206 1505 2208 2010 2512 Revision: 28-Jun-2021 POWER RATING (mW) 50 150 200 400 400 750 800 1000 WORKING VOLTAGE (V) 75 75 100 200 150 150 200 200 RESISTANCE RANGE (Ω) 20 to 51K 2.5 to 130K 10 to 301K 10 to 1M 10 to 1M 10 to 1.75M 10 to 2M 10 to 3M Document Number: 60024 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D T D W T E L L CASE SIZE 0402 0603 0805 1206 1505 2010 2208 2512 L 0.041 ± 0.003 0.064 ± 0.006 0.080 ± 0.006 0.126 ± 0.008 0.155 ± 0.007 0.209 ± 0.009 0.230 ± 0.007 0.259 ± 0.009 W 0.022 ± 0.003 0.032 ± 0.005 0.050 ± 0.005 0.063 ± 0.005 0.050 ± 0.005 0.098 ± 0.005 0.075 ± 0.005 0.124 ± 0.005 T 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 D E 0.010 ± 0.005 0.010 ± 0.005 0.012 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) ENVIRONMENTAL TEST LIMITS PER AEC-Q200 -55 °C to +125 °C ± 50 ppm/°C +70 °C +150 °C MIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % JESD22, JA-104, 1000 cycles, -55 °C to +125 °C ± 0.15 % MIL-STD-202, 106 ± 0.20 % MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % MIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % MIL-STD-202, method 213, condition C ± 0.1 % MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % MIL-STD-202 method 210, condition D ± 0.10 % AEC-Q200-002 at 2 kV, human body ± 0.10 % J-STD-002, method B and B1 95 % AEC-Q200-006 at 1 kg for 60 s ± 0.10 % AEC-Q200-001 para 4.0 CONDITIONS Resistance Temperature Characteristic Max. Ambient Temp. at Rated Wattage Max. Ambient Temp. at Power Derating High Temperature Storage ΔR Temperature Cycling ΔR Moisture Resistance ΔR Biased Humidity ΔR Life ΔR Mechanical Shock ΔR Vibration ΔR Resistance to Soldering Heat ΔR Electrostatic Discharge ΔR Solderability Visual Terminal Strength ΔR Flame Retardance Visual TYPICAL VISHAY PERFORMANCE ± 35 ppm/°C +70 °C +150 °C + 0.016 % + 0.013 % + 0.0010 % + 0.004 % + 0.0220 % + 0.004 % + 0.0030 % + 0.0150 % - 0.032 % Acceptable + 0.009 % Acceptable DERATING CURVE Axis Title 10000 100 1000 60 1st line 2nd line 2nd line Rated Power (%) 80 40 100 20 10 0 0 70 125 155 Ambient Temperature (°C) Revision: 28-Jun-2021 Document Number: 60024 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAT www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 P A T 1 2 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PAT 0402 0603 0805 1206 1505 2010 2208 2512 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C L = ± 200 ppm/°C 0 6 E 1 0 0 2 RESISTANCE TOLERANCE TERMINATION The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % S = wraparound lead (Pb)-free solder w/nickel barrier B = wraparound Sn / Pb w/nickel barrier Example: 10R0 = 10 Ω 1000 = 100 Ω 1002 = 10 kΩ B S T 1 PACKAGING BULK BS = 100 min., 1 mult. WAFFLE WS = 100 min., 1 mult. W0 = 100 min., 100 mult. WI = 100 min., 1 mult. (item single lot date code) WP = 100 min., 1 mult. (package unit single lot date code) TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot date code) Note (1) Preferred packaging code RESISTANCE TCR (ppm/°C) TOLERANCE (%) 10 Ω to 1 MΩ 25, 50, 100, 200 0.1, 0.5, 1, 2, 5 5 Ω to 10 Ω 100, 200 1, 2, 5 1.0 Ω to 5 Ω 200 1, 2, 5 Revision: 28-Jun-2021 Document Number: 60024 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000