PAT1206E2493BST1

PAT www.vishay.com Vishay Dale Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating FEATURES • • • • • • These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated enhanced tantalum nitride resistor film to give superior performance on moisture resistance, electrostatic discharge, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating (lead (Pb)-free). This product will out-perform all requirements of AEC-Q200. • • • • • • CONSTRUCTION Passivation Tantalum Nitride Resistive Film Resistance range: 2.5  to 3 M AEC-Q200 qualified AEC-Q200 ESD rated class 1C (2 kV) Laser trimmed to any value Moisture resistant to MIL-STD-202, method 202 Tantalum nitride resistor film on high purity alumina substrate 100 % visual inspected per MIL-PRF-55342 Laser-trimmed tolerances to ± 0.1 % Load life stability < 0.05 % at 1000 h at 70 °C Very low noise and voltage coefficient (< -30 dB, < 0.1 ppm/V) Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL PERFORMANCE Solder Coating ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material CONDITIONS Tantalum nitride - 2.5  to 3 M - ± 25 ppm/°C to ± 100 ppm/°C -55 °C to +125 °C Resistance Range TCR: Absolute SPECIFICATIONS Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient ± 0.1 % to ± 1.0 % +25 °C ± 0.05 % 2000 h at 70 °C rated power Not applicable - Less than 0.1 ppm/V - 75 V to 200 V - Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - Working Voltage Noise < -30 dB - Shelf Life Stability: Absolute 100 ppm 1 year at 25 °C COMPONENT RATINGS POWER RATING (mW) WORKING VOLTAGE (V) 0402 CASE SIZE 50 75 20 to 51K 0603 150 75 2.5 to 130K 0805 200 100 10 to 301K 1206 400 200 10 to 1M 1505 400 150 10 to 1M 2208 750 150 10 to 1.75M 2010 800 200 10 to 2M 2512 1000 200 10 to 3M Revision: 27-Nov-2019 RESISTANCE RANGE () Document Number: 60024 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D T D W T E L L CASE SIZE 0402 0603 0805 1206 1505 2010 2208 2512 L 0.041 ± 0.003 0.064 ± 0.006 0.080 ± 0.006 0.126 ± 0.008 0.155 ± 0.007 0.209 ± 0.009 0.230 ± 0.007 0.259 ± 0.009 W 0.022 ± 0.003 0.032 ± 0.005 0.050 ± 0.005 0.063 ± 0.005 0.050 ± 0.005 0.098 ± 0.005 0.075 ± 0.005 0.124 ± 0.005 T 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 D E 0.010 ± 0.005 0.010 ± 0.005 0.012 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) ENVIRONMENTAL TEST LIMITS TYPICAL VISHAY PER AEC-Q200 PERFORMANCE CONDITIONS Resistance Temperature Characteristic -55 °C to +125 °C Max. Ambient Temp. at Rated Wattage Max. Ambient Temp. at Power Derating ± 50 ppm/°C ± 35 ppm/°C +70 °C +70 °C +150 °C +150 °C R MIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % + 0.016 % Temperature Cycling R JESD22, JA-104, 1000 cycles, -55 °C to +125 °C ± 0.15 % + 0.013 % Moisture Resistance R MIL-STD-202, 106 ± 0.20 % + 0.0010 % Biased Humidity R MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % + 0.004 % Life R MIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % + 0.0220 % High Temperature Storage Mechanical Shock R MIL-STD-202, method 213, condition C ± 0.1 % + 0.004 % Vibration R MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % + 0.0030 % Resistance to Soldering Heat R MIL-STD-202 method 210, condition D ± 0.10 % + 0.0150 % Electrostatic Discharge R AEC-Q200-002 at 2 kV, human body ± 0.10 % - 0.032 % Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength R AEC-Q200-006 at 1 kg for 60 s ± 0.10 % Flame Retardance Visual AEC-Q200-001 para 4.0 Solderability + 0.009 % Acceptable DERATING CURVE Percent of Rated Power 100 80 60 40 20 0 0 70 125 155 Ambient Temperature °C Revision: 27-Nov-2019 Document Number: 60024 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAT www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 P A T 1 2 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PAT 0402 0603 0805 1206 1505 2010 2208 2512 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C L = ± 200 ppm/°C 0 6 E 1 0 0 2 RESISTANCE TOLERANCE TERMINATION The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % S = wraparound  lead (Pb)-free  solder w/nickel barrier Example: 10R0 = 10  1000 = 100  1002 = 10 k B S T 1 PACKAGING BULK BS = 100 min., 1 mult. WAFFLE WS = 100 min., 1 mult. W0 = 100 min., 100 mult. WI = 100 min., 1 mult. (item single lot date code) WP = 100 min., 1 mult. (package unit single lot date code) TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot date code) Note (1) Preferred packaging code RESISTANCE TCR (ppm/°C) TOLERANCE (%) 10  to 1 M 25, 50, 100, 200 0.1, 0.5, 1, 2, 5 5  to 10  100, 200 1, 2, 5 1.0  to 5  200 1, 2, 5 Revision: 27-Nov-2019 Document Number: 60024 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000