PLT0603Z3740LBTS

PLT www.vishay.com Vishay Dale Thin Film Precision Low TCR Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.01 % Tolerance FEATURES • TCR of ± 5 ppm/°C standard • Tolerances to ± 0.01 % Available • Anti corrosion resistant film with (SPM) special passivation method Available • Stable film and performance characteristics (R ± 0.04 % at 70 °C, 10 000 h) • Non-standard resistance values available • Very low noise and voltage coefficient  (< -30 dB, 0.1 ppm/V) • UL 94 V-0 flame resistant • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Actual Size 0603 Vishay’s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for precision applications requiring low noise, stability, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details CONSTRUCTION SPM Passivation Enhancement Passivated Nichrome Resistive Film Solder Coating TYPICAL PERFORMANCE ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 5 TOL. 0.01 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute SPECIFICATIONS CONDITIONS Passivated nichrome - 100  to 3 M - ± 5 ppm/°C to ± 10 ppm/°C -55 °C to +125 °C ± 0.1 % to ± 0.01 % +25 °C R ± 0.02 % 2000 h at 70 °C - - ± 0.1 ppm/V (typical) - Stability: Ratio Voltage Coefficient Working Voltage 75 V to 200 V - Operating Temperature Range -55 °C to +125 °C - Storage Temperature Range -55 °C to +150 °C - Noise < -35 dB (typical) - R ± 0.01 % 1 year at +25 °C Shelf Life Stability: Absolute COMPONENT RATINGS POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0603 CASE SIZE 150 75 100 to 130K 0805 250 100 100 to 260K 1206 400 200 100 to 775K 2010 800 200 150 to 2M 2512 1000 200 200 to 3M Revision: 18-Oct-2019 Document Number: 60030 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE 0603 TERM L W T D E B, S 0.064 ± 0.006 0.032 ± 0.005 0.020 max. 0.012 ± 0.005 0.015 ± 0.005 0805 B, S 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005 1206 B, S 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 +0.005 / -0.010 0.020 +0.005 / -0.010 2010 B, S 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2512 B, S 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS - TYPICAL DERATING CURVE 100 k R ± (%) Thermal Shock 0.02 0.02 Short Time Overload 0.01 0.01 Low Temperature Operation 0.01 0.01 Resistance to Solder Heat 0.01 0.01 Moisture Resistance 0.02 0.02 High Temperature Exposure 0.02 0.02 Load Life (10 000 h, +70 °C) 0.04 0.04 ± 5 ppm/°C ± 5 ppm/°C ENVIRONMENTAL TEST TCR 100 Precent of Rated Power 10 k R ± (%) 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION P L T 0 GLOBAL CASE TCR MODEL SIZE CHARACTERISTIC PLT 0603 0805 1206 2010 2512 Z = ± 5 ppm/°C Y = ± 10 ppm/°C 6 0 3 Z RESISTANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. Example: 1001 = 1 k 2500 = 250  Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. 982R6 = 982.6  532R41 = 532.41  1 TOLERANCE 0 0 1 TERMINATION Q B T 1 PACKAGING L= B = wraparound Sn / Pb WS = WAFFLE PACK ± 0.01 % (2) solder w/ Ni barrier WI = 100 min., 1 mult. Q = ± 0.02 % (63 % Sn / 37 % Pb w/ (item single lot date code) nickel barrier) A = ± 0.05 % WP = 100 min., 1 mult. B = ± 0.1 % (package unit single S = wraparound D = ± 0.5 % lot date code) lead (Pb)-free solder F=±1% 96.5 % Sn / 3.0 % Ag / TAPE AND REEL 0.5 % Cu T0 = 100 min., 100 mult. RoHS compliant - e1 T1 = 1000 min., 1000 mult. (1) T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = full reel TS = 100 min., 1 mult. TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot date code) Notes (1) Preferred packaging code (2) L and Q tolerances are available only for resistance values > 250  Revision: 18-Oct-2019 Document Number: 60030 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000