PLTT0603Z2491QGT5

PLTT www.vishay.com Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance FEATURES • PLTT0603 case size is qualified to AEC-Q200 for automotive applications • -55 °C to 215 °C operating temperature range • TCR of ± 5 ppm/°C standard Available • Tolerances to ± 0.02 % • Anti corrosion resistant film with (SPM) special passivation method • Stable film and performance characteristics • 0.5 % max. at 2000 h, 215 °C, 25 % rated power • Non-standard resistance values available • Very low noise and voltage coefficient  (< -30 dB, 0.1 ppm/V) • UL 94 V-0 flame resistant • Gold terminations (10 μ" to 20 μ") • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Vishay’s proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for use in oil industry precision applications requiring low noise, long term stability under high temperature, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. CONSTRUCTION SPM Passivation Enhancement Available Passivated Nichrome Resistive Film Plated Gold (10 μ" to 20 μ") TYPICAL PERFORMANCE ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 5 TOL. 0.02 STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Passivated nichrome - 50  to 3 M - ± 5 ppm/°C -55 °C to +215 °C ± 0.1 % to ± 0.02 % +25 °C R ± 0.5 % 2000 h at 215 °C, 25 % rated power - - ± 0.1 ppm/V (typical) - Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage 100 V to 200 V - Operating Temperature Range -55 °C to +215 °C - Storage Temperature Range -55 °C to +215 °C - Noise < - 35 dB (typical) - R ± 0.01 % 1 year at +25 °C Shelf Life Stability: Absolute COMPONENT RATINGS CASE SIZE POWER RATING AT 70 °C (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0603 150 75 75 to 130K 0805 250 100 250 to 260K 1206 400 200 500 to 775K 2010 800 200 500 to 2M 2512 1000 200 500 to 3M Note • Consult factory for additional case size Revision: 08-Jul-16 Document Number: 60082 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0603 G 0.064 ± 0.006 0.032 ± 0.005 0.015 to 0.033 0.012 ± 0.005 0.015 ± 0.005 0805 G 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005 1206 G 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 2010 G 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 2512 G 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS - MIL-PRF-55342 CONDITIONS TYPICAL VISHAY PERFORMANCE Thermal Shock MIL-STD-202 method 107 Cond F, -65 °C to +150 °C ± 0.02 % Short Time Overload MIL-PRF-55342 Para 4.8.6, 2.5x rated working voltage ± 0.01 % ENVIRONMENTAL TEST Low Temperature Operation MIL-PRF-55342 Para 4.8.5, -65 °C ± 0.01 % Resistance to Soldering Heat MIL-STD-202 method 210 ± 0.01 % Moisture Resistance MIL-STD-202 method 106, no power applied ± 0.02 % MIL-PRF-55342 Para 4.8.7, at 150 °C for 100 h ± 0.02 % Life MIL-STD-202 method 108, 25 % rated power for 2000 h at 215 °C ± 0.50 % TCR MIL-STD-202 method 304 ± 5 ppm/°C High Temperature Exposure ENVIRONMENTAL TESTS - AEC-Q200 PLTT0603 Case Size Only ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY PERFORMANCE High temperature storage MIL-STD-202 method 108, 1000 h at 125 °C ± 0.10 % Temperature cycling JESD22 method JA-104, 1000 cycles, -55 °C to +155 °C ± 0.25 % Moisture resistance MIL-STD-202 method 106, no power applied ± 0.10 % Biased humidity MIL-STD-202 method 103, 1000 h at 85 °C, 85 % RH, 10 % rated power ± 0.20 % MIL-STD-202 method 108, 1000 h at 175 °C, 50 % rated power ± 0.50 % MIL-STD-202 method 213, condition C ± 0.02 % Life Mechanical shock Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.02 % MIL-STD-202 method 210, condition B ± 0.02 % Electrostatic discharge AEC-Q200-002, human body (< 1 k: 1 kV; > 1 k: 2 kV) < 1 k: 1 kV; > 1 k: 2 kV Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass MIL-STD-202 method 304 ± 5 ppm /°C MIL-PRF-55342, 0.5 kg for 30 s minimun Pass AEC-Q200-001 para 4.0 Pass Resistance to soldering heat TCR Die shear Flame retardance Revision: 08-Jul-16 Document Number: 60082 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT www.vishay.com Vishay Dale Thin Film DERATING CURVE Percent of Rated Power 100 75 50 25 0 0 70 175 215 230 Ambient Temperature °C PLTT0805 50 k STABILITY TEST RESULTS 0.50 0.50 0.40 0.40 0.30 0.30 Maximum Δ (%) Maximum Δ (%) PLTT0805 500  STABILITY TEST RESULTS 0.20 0.10 0.00 - 0.10 - 0.30 - 0.40 - 0.50 0 0.10 0.00 - 0.10 Test Conditions: Case Size: 0805 Resistance Value: 500 Ω Applied Power: 25 % of rated power Test Chamber Temperature: 215 °C - 0.20 0.20 Test Conditions: Case Size: 0805 Resistance Value: 50 kΩ Applied Power: 25 % of rated power Test Chamber Temperature: 215 °C - 0.20 - 0.30 - 0.40 - 0.50 125 250 425 500 750 1000 1100 1250 1525 1775 2000 0 125 250 425 500 750 1000 1100 1250 1525 1775 2000 Time on Test (h) Time on Test (h) Note • Performance obtained with following mounting conditions  PCB: Polymide IPC-7831A STD land patterns Solder paste: PbSnAg (93.5/5/1.5) GLOBAL PART NUMBER INFORMATION P L T T 0 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PLTT 0603 0805 1206 2010 2512 Z = ± 5 ppm/°C 8 0 5 Z 1 0 0 1 Q G T 1 RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point.  Example: 1001 = 1 k 2500 = 250   Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point.  982R6 = 982.6  532R41 = 532.41  Q= ± 0.02 % (1) A = ± 0.05 % B = ± 0.1 % D = ± 0.5 % F=±1% G=±2% G = Wraparound Gold  over Ni barrier (10 μ" min. Au) WS = WAFFLE  WI = 100 min./1mult (item single lot date code) WP = 100 min./1mult (package unit single lot date code)  TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min./1mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) Note Q tolerances are available only for resistance values  250 . (1) Revision: 08-Jul-16 Document Number: 60082 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000