PNM
www.vishay.com
Vishay Dale Thin Film
Precision Thin Film Non-Magnetic Resistor,
Surface Mount Chip, ± 25 ppm/°C, Tolerances to 0.1 %
FEATURES
Actual Size
1505
These devices eliminate materials that would disturb
magnetic fields applications such as in MRI magnetic
resonance imaging machines. The PNM series chip resistor
has been carefully engineered with non-magnetic materials
to eliminate the effects of these stray magnetic fields on
circuit performance, thereby resulting in simplified shielding
requirements and improved sound quality in audio
applications. Providing signal conditioning without
distortion from magnetic fields.
CONSTRUCTION
Passivation
•
•
•
•
•
•
•
•
•
•
•
Non-magnetic
Moisture resistant
Available
High purity alumina substrate
Non-standard values available
Available
MIL-STD-202 method 106 moisture
resistance with 10 % power
Available
100 % visual inspected per MIL-PRF-55342
Very low noise and voltage coefficient (< -30 dB)
Non-inductive
Laser-trimmed tolerances to ± 0.1 %
Wraparound resistance less than 10 m
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Tantalum Nitride
Resistive Film
Solder
coating
Barrier layer
High Purity
Alumina Substrate
Adhesion layer
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Tantalum nitride
10 to 3 M
± 25 ppm/°C to ± 100 ppm/°C
± 0.1 % to ± 1.0 %
R ± 0.03 %
0.1 ppm/V
75 V to 200 V
-55 °C to +155 °C
-55 °C to +155 °C
< -30 dB
-
CONDITIONS
-55 °C to +125 °C
+25 °C
-
COMPONENT RATINGS
CASE SIZE (1)
0402
0502
0505
0603
0805
0705
1005
1010
1206
1505
2208
2010
2512
POWER RATING (mW)
50
100
150
150
200
200
250
500
400
400
750
800
1000
WORKING VOLTAGE (V)
75
75
75
75
100
100
100
150
200
150
150
200
200
RESISTANCE RANGE ()
20 to 35K
20 to 65K
20 to 130K
10 to 130K
10 to 301K
10 to 301K
10 to 301K
50 to 600K
10 to 1M
10 to 1M
10 to 1.75M
10 to 2M
10 to 3M
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
Revision: 13-Sep-2018
Document Number: 60057
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PNM
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
L
W
T
D
E
0402
0.042 ± 0.008
0.022 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.010 ± 0.005
0502
0.055 ± 0.006
0.025 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0505
0.055 ± 0.006
0.050 ± 0.005
0.012 to 0.033
0.010 ± 0.005
0.015 ± 0.005
0.064 ± 0.006
0.032 ± 0.005
0.020 Max.
0.012 ± 0.005
0.015 ± 0.005
0.080 ± 0.006
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1005
0.105 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1010
0.105 ± 0.007
0.100 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
1206
0.126 ± 0.008
0.063 ± 0.005
0.015 to 0.033
0.020 + 0.005/- 0.010
0.020 + 0.005/- 0.010
1505
0.155 ± 0.007
0.050 ± 0.005
0.015 to 0.033
0.015 ± 0.005
0.015 ± 0.005
2010
0.209 ± 0.009
0.098 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2208
0.230 ± 0.007
0.075 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
2512
0.259 ± 0.009
0.124 ± 0.005
0.015 to 0.033
0.020 ± 0.005
0.020 ± 0.005
0603
0705, 0805
(1)
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
ENVIRONMENTAL TESTS (Vishay Performance vs. MIL-PRF-55342 Requirements)
LIMITS MIL-PRF-55342
CHARACTERISTIC “H”
TYPICAL VISHAY
PERFORMANCE
± 50 ppm/°C
± 35 ppm/°C
Max. Ambient Temperature at Rated Wattage
+70 °C
+70 °C
Max. Ambient Temperature at Power Derating
+150 °C
+150 °C
ENVIRONMENTAL TEST
Resistance Temperature Characteristic
Thermal Shock
R
± 0.25 %
± 0.040 %
Low Temperature Operation
R
± 0.25 %
± 0.005 %
Short Time Overload
R
± 0.10 %
± 0.010 %
High Temperature Exposure
R
± 0.20 %
± 0.150 %
Resistance to Bonding Exposure
R
± 0.25 %
± 0.005 %
Moisture Resistance
R
± 0.40 %
± 0.029 %
Life + 70 °C at 1000 hours
R
± 0.50 %
± 0.03 %
10 000 minimum
> 100 000 M
Insulation Resistance
Revision: 13-Sep-2018
Document Number: 60057
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PNM
www.vishay.com
Vishay Dale Thin Film
FILM LOAD LIFE STABILITY (at +125 °C)
DERATING CURVE
0.1 %
Percent of Rated Power
100
0.06 %
0.05 %
0.04 %
0.03 %
0.02 %
Maximum
Absolute
Change
0.01 %
0.006 %
0.005 %
0.004 %
0.003 %
0.002 %
0.001 %
80
60
40
20
0
200
400
600
800 1000 1200 1400 1600 1800 2000
0
70
125
155
Ambient Temperature °C
Time in h at + 125 °C
GLOBAL PART NUMBER INFORMATION
P
N
GLOBAL
MODEL
PNM
nonmagnetic
resistor
M
CASE
SIZE
0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
1
2
TCR
CHARACTERISTIC
E = 25 ppm
(R > 100 )
H = 50 ppm
(R > 50 )
K = 100 ppm
(R > 10 )
0
6
E
1
0
0
2
B
B
T
1
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
The first 3 digits are
significant
figures
and the last digit
specifies the number
of zeros to follow.
“R” designates the
decimal point.
Example:
10R0 = 10
1000 = 100
1001 = 1 k
B = ± 0.1 % (1)
B = wraparound
Sn/Pb solder
63 % Sn/ 37 % Pb
S = wraparound
lead (Pb)-free solder
96.5 % Sn/3.0 % Ag/
0.5 % Cu
RoHS compliant - e1
BS = BULK
100 min., 1 mult
WS = WAFFLE
100 min., 1 mult
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J=±5%
Notes
(1) B = 0.1 % tolerance available only above 100
(2) Preferred packaging code
Revision: 13-Sep-2018
Document Number: 60057
3
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000