PTCCL05H100SBE

PTCCL - 600 V / 1000 V Series www.vishay.com Vishay BCcomponents 600 V / 1000 V PTC Thermistors for Overload Protection FEATURES • • • • • Fast response time for rapid protection Automatic resetting once overload is removed Operates on DC or AC voltage UL approved types available (E148885) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Over-temperature/over-load protection for metering, low current signal protection, digital signal protection against over-voltage DESCRIPTION Test and measuring instruments, such as oscilloscopes and digital multimeters, can be easily damaged if excessive voltages are applied across their input terminals. Simple and effective overload protection can be provided by connecting a high-voltage PTC thermistor in series with the instrument; see Typical Connection of the PTC Thermistor for Digital Multimeter Protection drawing. Under normal conditions, the resistance of the PTC thermistor is low, so the test voltage will be measured by the instrument. Under an overload condition, the PTC thermistor will switch to its high-resistance state, absorbing the overload current and protecting the instrument. When the overload is removed, the PTC thermistor will return to its low-resistance state, ready to resume its protective function. QUICK REFERENCE DATA PARAMETER Maximum rated voltage VALUE UNIT 600 to 1000 VRMS 10 mA Nominal holding current (Int) 400 to 1600  Tolerance on R25 value 20 to 30 % Maximum overload current Iol 0.5 to 2.0 A Switching temperature 90 to 115 °C Operating temperature range at rated voltage -20 to 85 °C Resistance at 25 °C (R25) ELECTRICAL DATA AND ORDERING INFROMATION INT MAX. at 25 °C (mA) IT MIN. at 25 °C (mA) MAXIMUM VOLTAGE (1) (V) R25 (2) () INSULATION VOLTAGE (V) UL APPROVAL ORDERING PART NUMBERS PTCCL05H100SBE 10 20 1600 ± 300 600 - UL 10 25 1500 ± 450 1000 - - PTCCL07H100VBE 10 50 400 ± 100 600 > 1000 UL PTCCL10H010SBE Notes (1) These PTCs can handle maximum voltage without series resistance (2) Other resistance values and voltage levels on request COMPONENT DIMENSIONS in millimeters PTC THERMISTORS IN BULK D F T Ød L H H MAX. L D MAX. T MAX. F Ød 10.4 20 ± 3 5 4.5 5.0 12 20 ± 3 7 5.0 5.0 13.5 3.1 ± 0.5 10 6.5 8.12 Revision: 02-Mar-16 MASS (g) SPQ PART NUMBER 0.6 ~ 0.5 500 PTCCL05H100SBE 0.6 ~ 0.60 250 PTCCL07H100VBE 0.8 ~ 1.8 500 PTCCL10H010SBE Document Number: 29072 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTCCL - 600 V / 1000 V Series www.vishay.com Vishay BCcomponents TYPICAL CONNECTION OF THE PTC THERMISTOR FOR DIGITAL MULTIMETER PROTECTION PTC thermistor Ω input V INSTRUMENT A MSB392 TYPICAL CURRENT / VOLTAGE CHARACTERISTIC Axis Title 10000 PTCCL07H100VBE PTCCL10H010SBE 1000 1st line 2nd line 2nd line Current (mARMS) 100 10 100 PTCCL05H100SBE 1 1 10 10 1000 100 Voltage (VRMS) 2nd line TYPICAL RESISTANCE / TEMPERATURE CHARACTERISTIC ( 5 VDC) Axis Title 108 10000 PTCCL07H100VBE PTCCL05H100SBE 106 1000 1st line 2nd line 2nd line Resistance (Ω) 107 105 104 100 103 PTCCL10H010SBE 102 10 -50 -25 0 25 50 75 100 125 150 175 Temperature (°C) 2nd line Revision: 02-Mar-16 Document Number: 29072 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000