PTF6530K000FYEB

PTF www.vishay.com Vishay Dale Metal Film Resistors, Axial, High Precision, High Stability FEATURES • Extremely low temperature coefficient of resistance • Very low noise and voltage coefficient Available • Very good high frequency characteristics • Can replace wirewound bobbins • Proprietary epoxy coating provides superior moisture protection • For surface mount product, see Vishay Dale’s Available PSF datasheet (www.vishay.com/doc?30162) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MODEL MODEL RESISTANCE POWER RATING (3) LIMITING ELEMENT TEMPERATURE TOLERANCE RANGE VOLTAGE MAX. (1) COEFFICIENT P85 °C ±%  W V ± ppm/°C 0.05 200 5, 10, 15 0.02, 0.05, 0.1, 0.25, 0.5, 1 15 to 100K 0.125 300 5, 10, 15 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1 15 to 500K 0.25 500 5, 10, 15 0.05, 0.1, 0.25, 0.5, 1 15 to 1M PTF51 PTF-51 PTF56 PTF-56 PTF65 PTF-65 Notes • DSCC has created a drawing to support the need for a precision axial-leaded product. Vishay Dale is listed as a resource on this drawing as follows: (1) (2) (3) TEMPERATURE MAXIMUM WORKING RESISTANCE DSCC TOLERANCE VISHAY DALE POWER RATING COEFFICIENT VOLTAGE (1) P85 °C RANGE DRAWING ± % MODEL ± ppm/°C W  V NUMBER PTF56..31, 89088 0.100 15 to 100K 0.01, 0.05, 0.1, 0.5, 1 5, 10 200 PTF56..32 (2) PTF65..16, 0.250 15 to 100K 0.05, 0.1, 0.5, 1 5, 10 200 90038 PTF65..14 (2) This drawing can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg Continuous working voltage shall be P x R or maximum working voltage, whichever is less. Hot solder dipped leads. For operation of the PTF resistors at higher power ratings, see the Load Life Shift Due to Power and Derating table. This table gives a summary of the effects of using the PTF product at the more common combinations of power rating and case size, as well as quantifies the load life stability under those conditions. TEMPERATURE COEFFICIENT CODES GLOBAL TC CODE Z Y X HISTORICAL TC CODE T-16 T-13 T-10 TEMPERATURE COEFFICIENT 5 ppm/°C 10 ppm/°C 15 ppm/°C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PTF5620K500BYRE (preferred part numbering format) P GLOBAL MODEL PTF51 PTF56 PTF65 T F 5 RESISTANCE VALUE R=Ω K = kΩ M = MΩ 15R000 = 15 Ω 500K00 = 500 kΩ 1M0000 = 1.0 MΩ 6 2 0 TOLERANCE CODE T = ± 0.01 % (1) Q = ± 0.02 % (1) A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ±1 % K 5 0 0 B Y TEMP. COEFFICIENT Z = 5 ppm Y = 10 ppm X = 15 ppm 0 = special R E SPECIAL PACKAGING EK = lead (Pb)-free, bulk EA = lead (Pb)-free, T/R (full) EB = lead (Pb)-free, T/R (1000 pieces) BF = tin/lead, bulk RE = tin/lead, T/R (full) R6 = tin/lead, T/R (1000 pieces) Historical Part Number example: PTF-5620K5BT-13R36 (will continue to be accepted) PTF-56 20K5 B T-13 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT Blank = standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable R36 PACKAGING Notes • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). (1) Historical tolerance codes were BB for 0.01 % and BC for 0.02 %. Revision: 16-Sep-16 Document Number: 31019 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PTF www.vishay.com Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 85 °C UNIT PTF51 PTF56 PTF65 W 0.05 0.125 0.25 Limiting Element Voltage V 200 300 500 Insulation Voltage (1 Min) Veff > 500 > 500 > 500 Thermal Resistance K/W < 1300 < 520 260 N > 150 > 50 > 50 Terminal Strength, Axial Insulation Resistance   1011  1011  1011 Category Temperature Range °C -55 to +150 -55 to +150 -55 to +150 Failure Rate Weight (Max.) 10-9/h