PTS AT
www.vishay.com
Vishay Beyschlag
Temperature Dependent Platinum
Thin Film Chip Resistor (RTD)
FEATURES
• Standardized characteristics according to
IEC 60751
• AEC-Q200 qualified
• Short reaction times down to t0.9 2 s (in air)
• Outstanding stability of temperature
characteristic
• Superior temperature cycling robustness
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
DESIGN SUPPORT TOOLS AVAILABLE
3D 3D
3D Models
Temperature measurement and control in
• Automotive electronics
Design Tools
Models
• Aviation electronics
• Industrial electronics
PTS AT SMD flat chip temperature dependent resistors are
the perfect choice for temperature control of electronics
operating under varying environmental conditions. The
highly controlled platinum thin film manufacturing process
guarantees an outstanding stability of temperature
characteristics which ensures reliable operation even under
harsh conditions. Typical applications include automotive,
aviation and industrial electronics.
TECHNICAL SPECIFICATIONS
DESCRIPTION
Resistance values R0 at 0 °C
PTS0603M
PTS0805M
PTS1206M
100
100 , 500
100 , 500 , 1000
Temperature coefficient (0 °C to +100 °C), IEC60751
+3850 ppm/K
Tolerance classes
F0.3, F0.6
Temperature range
-55 °C to +175 °C
Long term stability |R0/R0|;
R0 change after 1000 h at +155 °C
0.1 %
Insulation resistance
> 10 M
Measurement current Imeas. (DC) (1)
Self-heating at 0
°C (2)
100
0.1 mA to 0.50 mA
0.1 mA to 1.0 mA
0.1 mA to 1.0 mA
500
-
0.1 mA to 0.40 mA
0.1 mA to 0.40 mA
1000
-
-
0.1 mA to 0.25 mA
0.9 K/mW
0.8 K/mW
0.7 K/mW
t0.5 0.1 s
t0.5 0.2 s
t0.5 0.3 s
t0.9 0.2 s
t0.9 0.3 s
t0.9 0.4 s
t0.5 1.0 s
t0.5 1.5 s
t0.5 2.0 s
t0.9 3.0 s
t0.9 5.0 s
Calm air
(v = 0.0 m/s)
Flowing water
(v = 0.4 m/s)
Thermal response time (2)
Flowing air
(v = 3.0 m/s)
Failure rate: FITobserved
t0.9 2.0 s
0.5 x 10-9/h
Notes
(1) Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 °C
(2) Valid for sensor element only, in low dissipative mode. Response time and self-heating are influenced by mounting materials as substrate,
solder lands, tracks and solders used
Revision: 25-Jun-2019
Document Number: 28899
1
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTS AT
www.vishay.com
Vishay Beyschlag
DIMENSIONS in millimeters
Tt
W
WT
H
Tb
L
DIMENSIONS AND MASS
TYPE
WT
Tt
Tb
MASS
(mg)
0.85 ± 0.1
> 75 % of W
0.3 + 0.15/- 0.2
0.3 + 0.15/- 0.2
1.9
1.25 ± 0.15
> 75 % of W
0.4 ± 0.2
0.4 ± 0.2
4.6
> 75 % of W
0.5 ± 0.25
0.5 ± 0.25
9.2
H
L
W
PTS 0603
0.45 + 0.1/- 0.05
1.55 +0.05 / -0.1
PTS 0805
0.45 + 0.1 / - 0.05
2.0 ± 0.1
PTS 1206
0.55 ± 0.1
3.1 + 0.1 / - 0.2
1.6 ± 0.15
SOLDER PAD DIMENSIONS in millimeters
X
G
Y
Z
RECOMMENDED SOLDERPAD DIMENSIONS
TYPE
WAVE SOLDERING
REFLOW SOLDERING
G
Y
X
Z
G
Y
X
Z
PTS 0603
0.55
1.1
1.1
2.75
0.65
0.7
0.95
2.05
PTS 0805
0.8
1.25
1.50
3.2
0.9
0.9
1.4
2.7
PTS 1206
1.4
1.5
1.9
4.4
1.5
1.15
1.75
3.8
DESCRIPTION
A homogeneous film of platinum is deposited on a high
grade (AI2O3) ceramic substrate and conditioned to achieve
the correct temperature coefficient and stability. The
sensor-elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure matte tin on nickel
plating, the immunity against tin whisker growth has been
proven under extensive testing.
QUALITY
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual sensors. Only
accepted products are laid directly into the paper tape in
accordance with IEC 60286-3.
STORAGE
Solderability is specified for 2 years after production or
re-qualification. The permitted storage time is 20 years.
ASSEMBLY
The Pt-sensors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC61760-1. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
Revision: 25-Jun-2019
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The use of potting resins in close contact
with the protective coating or terminations is not
recommended.
For frequent high temperature usage, thermal compatible
substrates and solder alloys should be selected to minimize
any thermal mismatch.
All products comply with the CEFIC-EECA-EICTA list of
legal restrictions on hazardous substances.
This includes full compatibility with the following directives:
• 2000/53/EC End of Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The Pt-sensors are tested in accordance with
• IEC 60751
• IEC 60068 series
The PTS AT are AEC-Q200 qualified.
Document Number: 28899
2
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTS AT
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER (2): PTS0805M1B500RP100
P
T
S
0
8
0
5
M
TYPE
SIZE CODE
3 digits
4 digits
1 digit
PTS = platinum
temperature
sensor SMD
0603
0805
1206
M = AT
(automotive)
1
B
5
0
TOLERANCE
CLASS
VERSION
0
R
P
1
0
0
RESISTANCE
VALUE
PACKAGING (3)
2 digits
4 digits
2 digits
2 digits
1B = class F0.3
2B = class F0.6
100R = 100
500R = 500
1K00 = 1000
PU
P1
P5
00 = standard
SPECIAL
PRODUCT DESCRIPTION (4): PTS 0805-B AT P1 500R
PTS
0805
-B
AT
P1
500R
TYPE
SIZE CODE
TOLERANCE
CLASS
VERSION
PACKAGING (3)
RESISTANCE
VALUE
PTS = platinum
temperature
sensor SMD
0603
0805
1206
AT = automotive
PU
P1
P5
100R = 100
500R = 500
1K = 1000
B = class F0.3
2B = class F0.6
Notes
(1) Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
(2) The part number is shown to facilitate the introduction of a unified part numbering system
(3) Please refer to table PACKAGING
(4) We recommend that the Production Description is used to minimize the possibility of errors in order handling
PACKAGING
TYPE
CODE
PTS 0603
PTS 0805
PTS 1206
QUANTITY
PU
100
P1
1000
P5
5000
CARRIER
TAPE
WIDTH
PITCH
Paper tape acc.
IEC 60286-3
8 mm
4 mm
BOX/REEL
BOX/REEL
DIAMETER
Plastic box
114 mm
Reel
180 mm/7"
TEST AND REQUIREMENTS - PERFORMANCE
TYPICAL PERFORMANCE
TEST
CONDITIONS
REQUIREMENTS
|R0/R0| ±
|R0/R0| ±
T ±
High temperature exposure (storage)
AEC-Q200, 1000 h at 155 °C
0.1 %
0.015 %
0.04 °C
High temperature exposure (storage)
1000 h at 175 °C
0.2 %
0.018 %
0.05 °C
AEC-Q200, 1000 cycles
-55 °C to +155 °C
0.5 %
0.04 %
0.10 °C
Biased humidity
1000 h, 1 mA biased at 85 °C / 85 % rh
0.5 %
0.015 %
0.04 °C
Operational life
1000 h, 1 mA biased at 125 °C
0.2 %
0.01 %
0.03 °C
MIL-STD 202, method 204
0.1 %
0.02 %
0.05 °C
Temperature cycling
Vibration
Mechanical shock
Resistance to soldering heat
ESD
Board flex
Terminal strength
Revision: 25-Jun-2019
MIL-STD 202, method 213
0.1 %
0.02 %
0.05 °C
Solder bath dipping 10 s at 260°C
0.25 %
0.05 %
0.13 °C
AEC-Q200-002, HBM (CD) 1.0 kV (0603),
1.5 kV (0805), 2.0 kV (1206)
0.2 %
0.01 %
0.03 °C
AEC-Q200-005, 2 mm during 60 s
0.2 %
0.015 %
0.04 °C
AEC-Q200-006, shear test
10 N / 17.7 N during 60 s
0.25 %
0.018 %
0.05 °C
Document Number: 28899
3
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PTS AT
www.vishay.com
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
The temperature resistance relationships of the PTS series
follow different equations:
According to IEC 60751 the values of the coefficients are:
A = 3.9083 x 10-3 °C-1
B = -5.775 x 10-7 °C-2
C = -4.183 x 10-12 °C-4
For the temperature range of -55 °C up to 0 °C:
RT = R0 x (1 + A x T + B x T2 + C x (T - 100 °C) x T3)
The tolerances values of the PTS AT series are classified by
the following equations as specified by IEC 60751:
And for the temperature range of 0 °C up to +175 °C:
RT = R0 x (1 + A x T + B x
T2)
Class F0.3: TF0.3 = ± (0.3 + 0.005 x |T|)
RT: Resistance as a function of temperature
R0: Nominal resistance value at 0 °C
T: Temperature in °C
Class F0.6: TF0.6 = ± (0.6 + 0.010 x |T|)
NOMINAL RESISTANCE VALUES AND TEMPERATURE TOLERANCE
TEMPERATURE
in °C
-55
-50
-25
0
25
50
75
100
125
150
175
R0 = 100
78.319
80.306
90.192
100.00
109.73
119.40
128.99
138.51
147.95
157.33
166.63
NOMINAL RESISTANCE in
R0 = 500
R0 = 1000
391.59
783.19
401.53
803.06
450.96
901.92
500.00
1000.00
548.67
1097.35
596.99
1193.97
644.94
1289.87
692.53
1385.06
739.76
1479.51
786.63
1573.25
833.13
1666.27
TOLERANCE in K
CLASS F0.3
CLASS F0.6
± 0.58
± 1.15
± 0.55
± 1.10
± 0.43
± 0.85
± 0.30
± 0.60
± 0.43
± 0.85
± 0.55
± 1.10
± 0.68
± 1.35
± 0.80
± 1.60
± 0.93
± 1.85
± 1.05
± 2.10
± 1.18
± 2.35
Ratio RT/R0
1.7
1.6
1.5
RT/R0
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
- 75
- 50
- 25
0
25
50
75
100
125
150
175
Temperature in °C
Tolerances for ClassF0.3 and F0.6
2.4
1.2
F0.6 Temp. Tol.
1.1
2.0
1.0
F0.6 R0 Tol.
1.8
1.6
0.8
1.4
0.7
F0.3 Temp. Tol.
1.2
1.0
0.6
0.5
0.8
0.4
F0.3 R0 Tol.
0.6
0.4
0.2
0.0
- 75
0.9
R0 Tol. in ± %
Temperature Tol. in ± °C
2.2
0.3
0.2
- 50
- 25
0
25
50
75
100
125
150
0.1
0.0
175
Temperature in °C
Revision: 25-Jun-2019
Document Number: 28899
4
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000