RCWL
www.vishay.com
Vishay Dale
Thick Film Surface Mount Chip Resistors,
Wraparound, Low Value (0.1 Ω to 0.91 Ω)
FEATURES
•
•
•
•
•
•
•
Low resistance values (0.1 Ω to 0.91 Ω)
Suitable for current sensing and shunts
Metal glaze on high quality ceramic
Protective overglaze
Solder contacts on Ni barrier layer
AEC-Q200 qualified
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Available
Available
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
STANDARD ELECTRICAL SPECIFICATIONS
CASE SIZE
POWER RATING
P70 °C
W
RCWL0402 (1)(2)
0402
0.063
RCWL0603 (2)
0603
0.1
RCWL0805 (2)
0805
0.125
RCWL1206 (2)
1206
0.25
RCWL1210 (2)
RCWL1218 (2)
RCWL2010 (2)
RCWL2512 (2)
1210
1218
2010
2512
0.33
1.0
0.5
1.0
GLOBAL
MODEL
TEMPERATURE
COEFFICIENT
± ppm/°C
600
400
400
200
300
200
300
200
200
200
200
200
RESISTANCE
RANGE
Ω
0.22 to 0.43
0.47 to 0.91
0.10 to 0.43
0.47 to 0.91
0.10 to 0.43
0.47 to 0.91
0.10 to 0.43
0.47 to 0.91
0.10 to 0.91
0.10 to 0.91
0.10 to 0.91
0.10 to 0.91
TOLERANCE
±%
E-SERIES
5
24
5
24
5
24
5
24
5
5
5
5
24
24
24
24
Notes
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
• Part marking: reference “Surface Mount Resistor Marking” (www.vishay.com/doc?20020)
• The resistance is measured from the top side
(1) Terminal strength tested per AEC-Q200-006 with the exception of 0.75 kg force is used
(2) Qualification to AEC-Q200 rev. D
GLOBAL PART NUMBER INFORMATION
Part Number: RCWL0402R470JQEA
R
C
W
L
0
4
0
2
R
4
7
0
J
Q
E
A
GLOBAL MODEL
(8 digits)
VALUE
(4 digits)
TOLERANCE
(1 digits)
TCR
(1 digits)
PACKAGING
(2 digits)
SPECIAL
(up to 2 digits)
RCWL0402
RCWL0603
RCWL0805
RCWL1206
RCWL1210
RCWL1218
RCWL2010
RCWL2512
R = decimal
R470 = 0.47 Ω
J = ± 5.0 %
N = ± 200 ppm/°C
M = ± 300 ppm/°C
Q = ± 400 ppm/°C
T = ± 600 ppm/°C
EA = lead (Pb)-free,
tape/reel
(dash number)
from 1 to 99 as
applicable
Revision: 24-Oct-2023
TA = tin/lead,
tape/reel
Document Number: 20018
1
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWL
www.vishay.com
Vishay Dale
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT RCWL0402 RCWL0603 RCWL0805 RCWL1206 RCWL1210 RCWL1218 RCWL2010 RCWL2512
Operating temperature range
°C
Maximum operating voltage
V
Insulation voltage Uins (1 min)
V
Insulation resistance
Ω
Weight/1000 pieces (typical)
g
-55 to +155
(P x R)1/2
> 75
> 100
> 200
> 300
> 300
> 300
> 300
> 300
16
29.5
25.5
40.5
> 109
0.65
2
5.5
10
DIMENSIONS
b
l
a
• Surface mount solder profile recommendations: www.vishay.com/doc?31052
DIMENSIONS in millimeters
MODEL
L
W
H
T1
T2
RCWL0402
1.0 ± 0.05
0.5 ± 0.05
0.35 ± 0.05
0.25 ± 0.05
RCWL0603
1.55
+ 0.10
- 0.05
0.85 ± 0.1
0.45 ± 0.05
0.3 ± 0.2
RCWL0805
2.0
+ 0.20
- 0.10
1.25 ± 0.15
0.45 ± 0.05
0.3
RCWL1206
3.2
+ 0.10
- 0.20
1.6 ± 0.15
0.55 ± 0.05
RCWL1210
3.2 ± 0.2
2.5 ± 0.2
RCWL1218
3.2
+ 0.10
- 0.20
REFLOW SOLDERING
WAVE SOLDERING
a
b
l
a
b
l
0.2 ± 0.1
0.4
0.6
0.5
0.5
0.6
0.5
0.3 ± 0.2
0.5
0.9
1.0
0.9
0.9
1.0
0.3 ± 0.2
0.7
1.3
1.2
0.9
1.3
1.3
0.45 ± 0.2
0.4 ± 0.2
0.9
1.7
2.0
1.1
1.7
2.3
0.55 ± 0.05
0.45 ± 0.2
0.4 ± 0.2
0.9
2.5
2.0
1.1
2.5
2.2
4.6 ± 0.15
0.55 ± 0.05
0.45 ± 0.2
0.4 ± 0.2
1.05
4.9
1.9
1.25
4.8
1.9
+ 0.20
- 0.10
RCWL2010
5.0 ± 0.15
2.5 ± 0.15
0.6 ± 0.1
0.6 ± 0.2
0.6 ± 0.2
1.0
2.5
3.9
1.2
2.5
3.9
RCWL2512
6.3 ± 0.2
3.15 ± 0.15
0.6 ± 0.1
0.6 ± 0.2
0.6 ± 0.2
1.0
3.2
5.2
1.2
3.2
5.2
DERATING
90
80
0402 0603 0805
1206
1210
70
60
50
2010
40
2512
30
Rated Power in %
Temperature Rise in °C
TEMPERATURE RISE
120
100
80
60
40
1218
20
20
10
0
0
0.1
0.2
0.3
0.4
0.5
Power in W
Revision: 24-Oct-2023
0
-55
-25
0
25
75
70
100
125
155
175
Ambient Temperature in °C
Document Number: 20018
2
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RCWL
www.vishay.com
Vishay Dale
PERFORMANCE
TEST
CONDITIONS OF TEST
TEST LIMITS
± (2.0 % + 0.005 Ω) ΔR
Thermal shock
MIL-STD-202, method 107, -55 °C to +125 °C, 300 cycles at each extreme
Short time overload
2 x rated power; duration according the model
± (0.5 % + 0.005 Ω) ΔR
High temperature exposure
MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power
± (2.0 % + 0.005 Ω) ΔR
Temperature cycling
JESD 22, method JA-104, 1000 cycles (-55 °C to +125 °C)
± (2.0 % + 0.005 Ω) ΔR
Biased humidity
MIL-STD-202, method 103, 1000 h 85 °C / 85 % RH, 10 % x (P x R)1/2
± (2.0 % + 0.005 Ω) ΔR
Mechanical shock
MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions
± (0.5 % + 0.005 Ω) ΔR
Vibration
MIL-STD-202, method 204, 5 g’s, 20 min, 12 cycles, 3 directions, 10 Hz to 2000 Hz ± (0.5 % + 0.005 Ω) ΔR
Operational life
MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power
± (2.0 % + 0.005 Ω) ΔR
Resistance to solder heat
MIL-STD-202, method 210, +260 °C solder,
10 s to 12 s dwell, 25 mm/s emergence
± (1.0 % + 0.005 Ω) ΔR
Moisture resistance
MIL-STD-202, method 106, 0 % power, 7a and 7b not required
± (2.0 % + 0.005 Ω) ΔR
Note
• Contact ww2bresistors@vishay.com for application specific performance requirements or qualification data. Typical performance is better
than stated test limits
PACKAGING
MODEL
REEL
TAPE WIDTH
DIAMETER
PITCH
PIECES/REEL
CODE
RCWL0402
8 mm/punched paper
180 mm/7"
2 mm
10 000
EA
RCWL0603
8 mm/punched paper
180 mm/7"
4 mm
5000
EA
RCWL0805
8 mm/punched paper
180 mm/7"
4 mm
5000
EA
RCWL1206
8 mm/punched paper
180 mm/7"
4 mm
5000
EA
RCWL1210
12 mm/punched paper
180 mm/7"
4 mm
5000
EA
RCWL1218
12 mm/embossed plastic
180 mm/7"
4 mm
4000
EA
RCWL2010
12 mm/embossed plastic
180 mm/7"
4 mm
4000
EA
RCWL2512
12 mm/embossed plastic
180 mm/7"
8 mm
2000
EA
Note
• Embossed carrier tape per EIA-481-1A
LINKS TO RELATED DOCUMENTS
SELECTOR GUIDE
Overview of Automotive Grade Products
www.vishay.com/doc?49924
TECHNICAL NOTES
SMD Current Sense: AEC-Q200 vs. Vishay Qualification
www.vishay.com/doc?30416
MIL-PRF vs. AEC-Q200: Do You Know What You Are Getting?
www.vishay.com/doc?11000
WHITE PAPER
Thermal Management for Surface-Mount Devices
www.vishay.com/doc?30380
Temperature Coefficient of Resistance for Current Sensing
www.vishay.com/doc?30405
Revision: 24-Oct-2023
Document Number: 20018
3
For technical questions, contact: ww2bresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
