RT025AS10R0KB

厂商：
TFUNK(威世)
封装：
-
描述：
电位器（操纵杆） 10Ω ±10% -

数据手册：

下载RT025AS10R0KB.pdf

立即购买

详情介绍
数据手册
价格&库存

RT025AS10R0KB 数据手册

RT25 www.vishay.com Vishay Sfernice Wirewound Rheostat / Potentiometer FEATURES • 25 W at 25 °C • CCTU 05-03B (PA1) • Vitreous - RT style • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters ADAPTATION BOARD PANEL CUT OUT DETAILS Ø 10.5 2 holes Ø 5 7.6 23.5 RT25-PA1 38 23.5 4 25 M10 x 0.75 -0 Ø 6 - 0.05 PANEL CUT OUT DETAILS Ø 4.5 12.5 ± 0.5 23 Ø 2.2 9±1 60° 12 22 ± 2 28 AS Ø 10.5 MOUNTING SIDE STANDARD ELECTRICAL SPECIFICATIONS MODEL RT25 RESISTANCE RANGE  TOLERANCE ±% RATED POWER P25 °C W VARIATION LAW STANDARD (1) LIMITING ELEMENT VOLTAGE V DIELECTRIC STRENGTH VRMS INSULATION RESISTANCE  1 to 4.7K 10 25 Linear 300 1000 103M (500 VCC) Note (1) On request: sectorial winding CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Temperature range -55 °C; +320 °C Mechanical protection Vitreous Climatic category CCTU 454 CEI 55 / 200 / 56 Mechanical travel 300° ± 5° Operating torque 1 Ncm to 10 Ncm End stop torque 50 Ncm Unit weight Revision: 21-Feb-2019 80 g Document Number: 50026 1 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT25 www.vishay.com Vishay Sfernice LOCKING DEVICE PARTICULAR CHARACTERISTICS This is supplied as an option. The available spindle length is according to the panel thickness. Order reference: DBA6 1 ± 0.2 13 2 tightening screws spanner n° 14 max. panel thickness 6.5 NOMINAL RESISTANCE  MAX. SERVICE VOLTAGE V MAX. CURRENT THROUGH WIPER mA 1 5 5000 1.5 6.12 4080 2.2 7.42 3370 3.3 9.08 2750 4.7 10.8 2300 6.8 13 1920 10 15.8 1580 15 19.4 1290 22 23.5 1070 ADAPTATION BOARD 33 28.7 870 This enables 2 point mounting instead of bush mounting. The adaptation board is supplied as an option with 2 mounting screws. Consequently, the available spindle length is reduced by 9.5 mm. 47 34.3 730 SPINDLES Ø mm DISTANCE TO MOUNTING PLATE mm SCREW DRIVER SLOT 22 6 CODE 41.2 605 50 500 150 61.2 408 220 74.2 337 330 90.8 275 470 108 230 130 192 With ASF 680 Without AM 1K 158 158 With AMF 1.5K 194 129 2.2K 235 107 3.3K 287 87 4.7K 343 73 25 6 68 100 50 Without AL 22 Without AS Note • For any special requirement on request: spindle flats, etc. Please supply detailed drawing. DIAL CG57 (OPTION) COMMAND SHAFT 29JF (OPTION) 21 4 holes Ø 3.5 Ø 43 Ø6 18 4 Ø 12 5 6 3 7 2 8 47 56 9 1 10 0 47 56 MARKING Vishay Sfernice trademark, series, style, power rating in watts, ohmic value (in  or k), tolerance (in %), maximum current in A, manufacturing date. Revision: 21-Feb-2019 Document Number: 50026 2 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT25 www.vishay.com Vishay Sfernice ORDERING INFORMATION RT 025 ASF 2201 K B XXX MODEL STYLE SPINDLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL DESIGN GLOBAL PART NUMBER INFORMATION R GLOBAL SIZE MODEL RT T 0 LOCKING DEVICE (OPT.) 025 D 2 WINDING (OPT.) 5 A COMMAND SHAFT S 1 0 R OHMIC VALUE The three first digits are AS = standard significant figures and the (Diam: 6 mm) last digit specifies the AM number of zeros to follow. AMF R designates decimal point. AL As applicable ASF xxx(x) = 2002 = 20 k internal 4700 = 470  number 10R0 = 10  0R01 = 0.01  BXXX or BXXXX 0 K B TOLERANCE PACKAGING J=5% K = 10 % B = bulk BO10 SPECIAL As applicable Ex = DXxx No standard packaging: N = bulk, qty. open RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 21-Feb-2019 Document Number: 50026 3 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000

下载 PDF

RT025AS10R0KB

物料型号：RT25

器件简介： - 该系列电位器是线绕型，具有25W在25°C时的额定功率。 - 符合RoHS标准，使用玻璃釉材料。

引脚分配： - 面板孔径为Ø 10.5mm，需要两个Ø 5mm的孔。 - 安装孔径为M10 x 0.75，面板厚度最大为6.5mm。

参数特性： - 电阻范围：1至4.7K欧姆。 - 公差：±10%。 - 额定功率：25W。 - 变化规律：线性。 - 限制元件电压：300V。 - 耐压：1000Vrms。 - 绝缘电阻：103M欧姆（500Vdc）。

功能详解： - 机械保护：玻璃釉。 - 机械行程：300°±5°。 - 操作扭矩：1至10Ncm。 - 端止扭矩：50Ncm。 - 单位重量：80克。

应用信息： - 温度范围：-55°C至+320°C。 - 气候类别：CCTU 454 CEI 55/200/56。

封装信息： - 提供锁定装置和适配板作为选项。 - 轴的可用长度取决于面板厚度。 - 适配板允许2点安装而非衬套安装。

特殊特性： - 提供了不同标称电阻值下的最大服务电压、通过触点的最大电流等参数。

标记： - 包括Vishay Sfernice商标、系列、样式、功率等级、欧姆值、公差、最大电流和制造日期。

订购信息： - 提供了型号、样式、轴、欧姆值、公差、包装和特殊设计的编码信息。