RT055AS1002KB

RT55 www.vishay.com Vishay Sfernice Wirewound Rheostat / Potentiometer FEATURES • 55 W at 25 °C • CCTU 05-03B (PA3) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters ADAPTATION BOARD PANEL CUT OUT DETAILS Ø 10.5 2 holes Ø 5 7.6 23.5 23.5 RT55-PA3 36 60 ± 2.5 4 PANEL CUT OUT DETAILS -0 Ø 6 - 0.05 Ø 4.5 M10 x 0.75 12.5 ± 0.5 38 15 Screw M3 9±1 60° 39 Ø 10.5 25 ± 2 AS Mounting side STANDARD ELECTRICAL SPECIFICATIONS MODEL RT55 RESISTANCE RANGE  TOLERANCE ±% RATED POWER P25 °C W VARIATION LAW STANDARD (1) LIMITING ELEMENT VOLTAGE V DIELECTRIC STRENGTH VRMS INSULATION RESISTANCE  1 to 10K 10 55 Linear 500 (linear law) 1000 103M (500 VCC) Note (1) On request: sectorial winding CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Temperature range -55 °C; +320 °C Mechanical protection Vitreous Climatic category CCTU 454 CEI 55 / 200 / 56 Mechanical travel 300° ± 5° Operating torque 2 Ncm to 15 Ncm End stop torque 100 Ncm Unit weight Revision: 24-Aug-16 175 g Document Number: 50027 1 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT55 www.vishay.com Vishay Sfernice LOCKING DEVICE This is supplied as an option. The available spindle length is according to the panel thickness. Order reference: DBA6 1 ± 0.2 2 tightening screws 13 o spanner n 14 max. panel thickness 6.5 ADAPTATION BOARD This enables 2 point mounting instead of bush mounting. The adaptation board is supplied as an option with 2 mounting screws. SPINDLES Ø mm DISTANCE TO MOUNTING SCREW DRIVER PLATE mm SLOT CODE MAX. SERVICE VOLTAGE V MAX. CURRENT THROUGH WIPER A 1 7.41 7.41 1.5 9.08 6.05 2.2 11 5 3.3 4.7 6.8 4.7 16.1 3.42 6.8 19.3 2.84 10 23.5 2.35 15 28.7 1.91 22 34.8 1.58 33 42.6 1.29 47 50.8 1.08 68 61.2 0.9 100 74.1 0.74 150 90.8 0.6 220 110 0.5 330 135 0.4 470 161 0.34 680 193 0.28 1K 235 0.23 AD With ADF Without AS 1.5K 287 0.19 With ASF 2.2K 348 0.16 AL 3.3K 426 0.13 4.7K 500 0.11 5.6K 500 0.09 10K 500 0.05 25 50 NOMINAL RESISTANCE  Without 22 6 PARTICULAR CHARACTERISTICS Without Note • For any special requirement on request: spindle flats, etc. Please supply detailed drawing. COMMAND KNOB 41JF (OPTION) DIAL CG78 (OPTION) 21 4 holes Ø 3.5 2 holes Ø 4.5 Ø 56 5 4 Ø 12 6 3 7 Ø6 2 8 18 65 78 9 1 10 0 47 65 78 MARKING Vishay Sfernice trademark, series, style, ohmic value (in  or k), tolerance (in %), maximum current in A, manufacturing date. Revision: 24-Aug-16 Document Number: 50027 2 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RT55 www.vishay.com Vishay Sfernice ORDERING INFORMATION RT 055 AS 4701 K B XXX MODEL STYLE SPINDLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL DESIGN GLOBAL PART NUMBER INFORMATION R GLOBAL SIZE MODEL RT T 0 LOCKING DEVICE (OPT.) 055 D 5 WINDING (OPT.) 5 A COMMAND SHAFT AS = standard (Diam: 6 mm) AL ASF AD As applicable ADF xxx(x) = internal number BXXX or BXXXX S 2 2 OHMIC VALUE The three first digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. R 0 K B TOLERANCE PACKAGING J=5% K = 10 % B = bulk BO1 SPECIAL As applicable Ex = DXxx 2002 = 20 k 4700 = 470  22R0 = 22  0R01 = 0.01  RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 24-Aug-16 Document Number: 50027 3 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000