RWR80S3740FRBSL

RWR Military www.vishay.com Vishay Dale Wirewound Resistors, Military/Established Reliability, MIL-PRF-39007 Qualified, Type RWR, Up to S Level, Axial Lead FEATURES • High temperature silicone coated • Complete welded construction • Qualified to MIL-PRF-39007 • Available in non-inductive styles (type N) with Ayrton-Perry winding for lowest reactive components DESIGN SUPPORT TOOLS • “S” level failure rate available click logo to get started Note • “Terminal Wire and Winding” type “W” and “Z” are not listed below but are available upon request. Please reference MIL-PRF-39007 QPL for approved “failure rate” and “resistance tolerance/ranges” Models Available STANDARD ELECTRICAL SPECIFICATIONS MILITARY MODEL RWR81S RWR81N RWR82S RWR82N RWR80S RWR80N RWR71S RWR71N RWR89S RWR89N RWR74S RWR74N RWR84S RWR84N RWR78S RWR78N VISHAY REFERENCE MODEL POWER RATING P25 °C W EGS-1-80 EGN-1-80 EGS-2 EGN-2 EGS-3-80 EGN-3-80 ESS-2A ESN-2A ESS-2B ESN-2B ESS-5 ESN-5 EGS-10-80 EGN-10-80 ESS-10 ESN-10 1 1 1.5 1.5 2 2 2 2 3 3 5 5 7 7 10 10 RESISTANCE RANGE  ± 0.1 % 0.499 to 1K 0.499 to 499 0.499 to 1.3K 0.499 to 649 0.499 to 3.16K 0.499 to 1.58K 0.499 to 12.1K 0.499 to 6.04K 0.499 to 4.12K 0.499 to 2.05K 0.499 to 12.1K 0.499 to 6.04K 0.499 to 12.4K 0.499 to 6.19K 0.499 to 39.2K 0.499 to 19.6K RESISTANCE RANGE  ± 0.5 %, ± 1 % 0.1 to 1K 0.1 to 499 0.1 to 1.3K 0.1 to 649 0.1 to 3.16K 0.1 to 1.58K 0.1 to 12.1K 0.1 to 6.04K 0.1 to 4.12K 0.1 to 2.05K 0.1 to 12.1K 0.1 to 6.04K 0.1 to 12.4K 0.1 to 6.19K 0.1 to 39.2K 0.1 to 19.6K WEIGHT (typical) g 0.21 0.21 0.23 0.23 0.34 0.34 0.90 0.90 0.70 0.70 4.2 4.2 3.6 3.6 9.0 9.0 Note • RWR82S and RWR82N: Core consists of beryllium oxide ceramic GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RWR74S49R9FSB12 R W R 7 4 S 4 9 R 9 F S B 1 2 MIL TYPE (5 digits) TERMINAL WIRE AND WINDING (1 digit) RESISTANCE VALUE (4 digits) TOLERANCE CODE (1 digit) FAILURE RATE (1 digit) PACKAGING CODE (3 digits) RWR71 RWR74 RWR78 RWR80 RWR81 RWR82 RWR84 RWR89 S = solderable, inductive N = solderable, non-inductive W = weldable, inductive (1) Z = weldable, non-inductive (1) 3 digit significant figure, followed by a multiplier B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h B12 = bulk pack S70 = tape/reel (smaller than 5 W) S73 = tape/reel (500 pieces) BSL (2) = bulk pack, single lot date code RSL (2) = tape/reel, single lot date code 49R9 = 49.9  1000 = 100  1001 = 1000  Notes Note that “W” and “Z” are not listed above but are available, see MIL-PRF-39007 QPL for available resistance values (2) Maximum order sizes apply for single lot date code package codes, please see table below (1) Revision: 15-Nov-17 Document Number: 30203 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RWR Military www.vishay.com Vishay Dale MAXIMUM ORDER SIZE FOR SINGLE LOT DATE CODE PACKAGE CODES MODEL MAXIMUM ORDER SIZE (PIECES) RWR81 1000 RWR82 1000 RWR80 1000 RWR71 500 RWR89 1000 RWR74 500 RWR84 300 RWR78 300 DIMENSIONS in inches [millimeters] 1.50 [38.10] (1) min. A C B DIMENSIONS in inches [millimeters] MILITARY MODEL A B C 0.250 ± 0.031 [6.35 ± 0.787] 0.085 ± 0.020 [2.16 ± 0.508] 0.020 ± 0.0015 [0.508 ± 0.038] RWR82 0.312 ± 0.016 [7.92 ± 0.406] 0.078 + 0.016 - 0.031 [1.98 + 0.406 - 0.787] 0.020 ± 0.0015 [0.508 ± 0.038] RWR80 0.406 ± 0.031 [10.31 ± 0.787] 0.094 ± 0.031 [2.39 ± 0.787] 0.020 ± 0.0015 [0.508 ± 0.038] RWR71 0.812 ± 0.062 [20.62 ± 1.58] 0.187 ± 0.031 [4.75 ± 0.787] 0.032 ± 0.002 [0.813 ± 0.051] RWR89 0.560 ± 0.062 [14.22 ± 1.58] 0.187 ± 0.031 [4.75 ± 0.787] 0.032 ± 0.002 [0.813 ± 0.051] RWR74 0.875 ± 0.062 [22.23 ± 1.58] 0.312 ± 0.031 [7.92 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RWR84 0.875 ± 0.062 [22.23 ± 1.58] 0.312 ± 0.031 [7.92 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RWR78 1.780 ± 0.062 [45.21 ± 1.58] 0.375 ± 0.031 [9.525 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RWR81 Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown TECHNICAL SPECIFICATIONS PARAMETER UNIT RWR RESISTOR CHARACTERISTICS VAC 500 minimum for 2 W and smaller, 1000 minimum for 3 W and larger Short Time Overload - 5x rated power for 5 s for 3 W size and smaller, 10x rated power for 5 s for 5 W size and greater Maximum Working Voltage V (P x R)1/2 Dielectric Withstanding Voltage Insulation Resistance . 1000 M minimum dry, 100 M minimum after moisture test Terminal Strength lb 5 minimum for 2 W and smaller, 10 minimum for 3 W and larger Solderability - Meets requirements of ANSI J-STD-002 °C -55 to +250 Operating Temperature Range RESISTANCE TEMPERATURE COEFFICIENT RWR71 RWR74 RWR78 RWR80 RWR81 RWR82 RWR84 RWR89 TEMPERATURE COEFFICIENT RESISTANCE RESISTANCE RESISTANCE RESISTANCE RESISTANCE RESISTANCE RESISTANCE RESISTANCE (ppm/°C) RANGE () RANGE () RANGE () RANGE () RANGE () RANGE () RANGE () RANGE () +650 max. 0.1 to 0.499 0.1 to 0.499 0.1 to 0.499 0.1 to 0.499 0.1 to 0.499 0.1 to 0.499 0.1 to 0.499 0.1 to 0.499 +400 max. 0.505 to 1.0 0.505 to 1.0 0.505 to 1.0 0.505 to 1.0 0.505 to 1.0 0.505 to 1.0 0.505 to 1.0 0.505 to 1.0 ± 50 1.01 to 10 1.01 to 10 1.01 to 10 1.01 to 10 1.01 to 10 1.01 to 10 1.01 to 10 1.01 to 10 ± 30 10.1 to 73.2 10.1 to 158 10.1 to 453 - - - 10.1 to 158 10.1 to 42.2 ± 20 74.1 and above 160 and above 459 and above 10.1 and above 10.1 and above 10.1 and above 160 and above 42.7 and above Revision: 15-Nov-17 Document Number: 30203 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RWR Military www.vishay.com Vishay Dale DERATING Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: ceramic, beryllium oxide (1), steatite or alumina, depending on power requirement Coating: special high temperature silicone Terminal and Winding: the terminal and the winding are identified by a letter symbol in the military type designation. Military symbol: S = solderable, inductively wound W = weldable, inductively wound N = solderable, non-inductively wound Z = weldable, non-inductively wound Terminals: solderable - Tinned Copperweld® Weldable - bare nickel per MIL-STD-1276, Type N-1 End Caps: stainless steel Part Marking: source code, JAN, military PIN, date/lot code RATED POWER IN % MATERIAL SPECIFICATIONS 120 100 80 60 40 20 0 - 65 - 50 0 25 50 150 250 AMBIENT TEMPERATURE IN °C Note (1) RWR82S and RWR82N: Core consists of beryllium oxide ceramic PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock MIL-STD-202, method 107 ± (0.2 % + 0.005 ) R Short Time Overload 5x rated power (RWR71, RWR80, RWR81, RWR89, RWR82),  10 x rated power (RWR74, RWR78, RWR84) for 5 s ± (0.2 % + 0.005 ) R Dielectric Withstanding Voltage 500 VRMS (RWR80, RWR81, RWR82),  1000 VRMS (RWR71, RWR74, RWR78, RWR84, RWR89), 1 min duration ± (0.1 % + 0.005 ) R Low Temperature Storage -55 °C for 24 h High Temperature Exposure 250 °C for 2000 h ± (0.1 % + 0.005 ) R ± (1.0 % + 0.005 ) R (1) Moisture Resistance MIL-STD-202, method 106 ± (0.2 % + 0.005 ) R Shock, Specified Pulse MIL-STD-202, method 213, condition I ± (0.1 % + 0.005 ) R Vibration, High Frequency MIL-STD-202, method 204, condition D ± (0.1 % + 0.005 ) R Load Life 2000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (0.5 % + 0.005 ) R Extended Life 10 000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.005 ) R Terminal Strength MIL-STD-202, method 211, condition A and C 5 pound (RWR80, RWR81, RWR82), 10 pound (RWR71, RWR74, RWR78, RWR84, RWR89) ± (0.1 % + 0.005 ) R Note (1) For resistance values above 100 , test limit is ± 1.0 % Revision: 15-Nov-17 Document Number: 30203 3 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000