S1FLJ-GS08

S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM www.vishay.com Vishay Semiconductors Standard Recovery Rectifier, High Voltage Surface Mount FEATURES eSMP® Series 2 1 23020 23019 • • • • • For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 °C / 10 s at terminals • Wave and reflow solderable • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SMF (DO-219AB) MECHANICAL DATA ADDITIONAL RESOURCES 3D 3D 3D Models Case: SMF (DO-219AB) Polarity: band denotes cathode end Weight: approx. 15 mg Packaging codes / options:  GS18/10K per 13" reel (8 mm tape), MOQ = 50K GS08/3K per 7" reel (8 mm tape), MOQ = 30K Circuit configuration: single PARTS TABLE PART S1FLB S1FLD S1FLG S1FLJ S1FLK S1FLM ORDERING CODE S1FLB-GS18 or S1FLB-GS08 S1FLD-GS18 or S1FLD-GS08 S1FLG-GS18 or S1FLG-GS08 S1FLJ-GS18 or S1FLJ-GS08 S1FLK-GS18 or S1FLK-GS08 S1FLM-GS18 or S1FLM-GS08 MARKING FB FD FG FJ FK FM REMARKS Tape and reel Tape and reel Tape and reel Tape and reel Tape and reel Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION TL = 75 °C TA = 65 °C (1) SYMBOL VRRM VRRM VRRM VRRM VRRM VRRM VRMS VRMS VRMS VRMS VRMS VRMS VDC VDC VDC VDC VDC VDC IF(AV) IF(AV) VALUE 100 200 400 600 800 1000 70 140 280 420 560 700 100 200 400 600 800 1000 1.5 0.7 UNIT V V V V V V V V V V V V V V V V V V A A TL = 25 °C IFSM 22 A Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave PART S1FLB S1FLD S1FLG S1FLJ S1FLK S1FLM S1FLB S1FLD S1FLG S1FLJ S1FLK S1FLM S1FLB S1FLD S1FLG S1FLJ S1FLK S1FLM Note (1) Averaged over any 20 ms period Rev.1.2, 24-Oct-2019 Document Number: 81820 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Operating junction and storage temperature range SYMBOL VALUE UNIT RthJA 180 K/W Tj, Tstg -55 to +150 °C Note (1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads ( 40 μm thick) ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Maximum instantaneous forward voltage 1 A (1) TA = 25 °C Maximum DC reverse current at rated DC blocking voltage TA = 125 °C Reverse recovery time IF = 0.5 A, IR = 1 A, Irr = 0.25 A Typical capacitance 4 V, 1 MHz PART SYMBOL MIN. TYP. MAX. UNIT S1FLB VF 1.1 V S1FLD VF 1.1 V S1FLG VF 1.1 V S1FLJ VF 1.1 V S1FLK VF 1.1 V S1FLM VF 1.1 V S1FLB IR 10 μA S1FLD IR 10 μA S1FLG IR 10 μA S1FLJ IR 10 μA S1FLK IR 10 μA S1FLM IR 10 μA S1FLB IR 50 μA S1FLD IR 50 μA S1FLG IR 50 μA S1FLJ IR 50 μA S1FLK IR 50 μA S1FLM IR 50 μA S1FLB trr 1800 ns S1FLD trr 1800 ns S1FLG trr 1800 ns S1FLJ trr 1800 ns S1FLK trr 1800 ns S1FLM trr 1800 S1FLB Cj 4 pF ns S1FLD Cj 4 pF S1FLG Cj 4 pF S1FLJ Cj 4 pF S1FLK Cj 4 pF S1FLM Cj 4 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle Rev.1.2, 24-Oct-2019 Document Number: 81820 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 Instantaneous Reverse Current (µA) 100 Resistive or inductive load Average Forward Current (A) 1.0 0.8 0.6 0.4 0.2 3.0 mm x 3.0 mm 40 µm thick copper pad areas 0 TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C TJ = 50 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 160 Ambient Temperature (°C) 17375 0 100 Fig. 1 - Forward Current Derating Curve 200 300 400 500 600 700 800 900 Instantaneous Reverse Voltage (V) 17377 Fig. 3 - Typical Instantaneous Reverse Characteristics 10 Instantaneous Forward Current (mA) 1000 9 8 7 TJ = 150 °C C (pF) TJ = 25 °C TJ = 100 °C 5 4 3 2 1 0 100 600 17376 6 0 700 800 900 1000 1100 17378 5 10 15 20 25 30 35 40 VR (V) Instantaneous Forward Voltage (mV) Fig. 4 - Capacitance vs. Reverse Voltage Fig. 2 - Typical Instantaneous Forward Characteristics Rev.1.2, 24-Oct-2019 Document Number: 81820 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SMF (DO-219AB) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.1(0.003) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.: S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev.1.2, 24-Oct-2019 Document Number: 81820 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM www.vishay.com Vishay Semiconductors BLISTER TAPE DIMENSIONS in millimeters: SMF (DO-219AB) PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev.1.2, 24-Oct-2019 Document Number: 81820 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM www.vishay.com Vishay Semiconductors ORIENTATION IN CARRIER TAPE - SMF Unreeling direction SMF cathode Top view Document no.: S8-V-3717.02-003 (4) Created - Date: 09. Feb. 2010 22670 Rev.1.2, 24-Oct-2019 Document Number: 81820 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: S1FLM-GS08 S1FLD-GS08 S1FLJ-GS08 S1FLG-GS08 S1FLK-GS08 S1FLD-GS18 S1FLM-GS18 S1FLB-GS08