S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com
Vishay Semiconductors
Standard Recovery Rectifier, High Voltage Surface Mount
FEATURES
eSMP® Series
2
1
23020
23019
•
•
•
•
•
For surface mounted applications
Low profile package
Ideal for automated placement
Glass passivated
High temperature soldering: 260 °C / 10 s at
terminals
• Wave and reflow solderable
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
SMF (DO-219AB)
MECHANICAL DATA
ADDITIONAL RESOURCES
3D 3D
3D Models
Case: SMF (DO-219AB)
Polarity: band denotes cathode end
Weight: approx. 15 mg
Packaging codes / options:
GS18/10K per 13" reel (8 mm tape), MOQ = 50K
GS08/3K per 7" reel (8 mm tape), MOQ = 30K
Circuit configuration: single
PARTS TABLE
PART
S1FLB
S1FLD
S1FLG
S1FLJ
S1FLK
S1FLM
ORDERING CODE
S1FLB-GS18 or S1FLB-GS08
S1FLD-GS18 or S1FLD-GS08
S1FLG-GS18 or S1FLG-GS08
S1FLJ-GS18 or S1FLJ-GS08
S1FLK-GS18 or S1FLK-GS08
S1FLM-GS18 or S1FLM-GS08
MARKING
FB
FD
FG
FJ
FK
FM
REMARKS
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
TL = 75 °C
TA = 65 °C (1)
SYMBOL
VRRM
VRRM
VRRM
VRRM
VRRM
VRRM
VRMS
VRMS
VRMS
VRMS
VRMS
VRMS
VDC
VDC
VDC
VDC
VDC
VDC
IF(AV)
IF(AV)
VALUE
100
200
400
600
800
1000
70
140
280
420
560
700
100
200
400
600
800
1000
1.5
0.7
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
A
A
TL = 25 °C
IFSM
22
A
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
Peak forward surge current 8.3 ms single half sine-wave
PART
S1FLB
S1FLD
S1FLG
S1FLJ
S1FLK
S1FLM
S1FLB
S1FLD
S1FLG
S1FLJ
S1FLK
S1FLM
S1FLB
S1FLD
S1FLG
S1FLJ
S1FLK
S1FLM
Note
(1) Averaged over any 20 ms period
Rev.1.2, 24-Oct-2019
Document Number: 81820
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com
Vishay Semiconductors
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Thermal resistance junction to ambient air (1)
Operating junction and storage temperature range
SYMBOL
VALUE
UNIT
RthJA
180
K/W
Tj, Tstg
-55 to +150
°C
Note
(1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads ( 40 μm thick)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Maximum instantaneous forward
voltage
1 A (1)
TA = 25 °C
Maximum DC reverse current at rated
DC blocking voltage
TA = 125 °C
Reverse recovery time
IF = 0.5 A, IR = 1 A, Irr = 0.25 A
Typical capacitance
4 V, 1 MHz
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
S1FLB
VF
1.1
V
S1FLD
VF
1.1
V
S1FLG
VF
1.1
V
S1FLJ
VF
1.1
V
S1FLK
VF
1.1
V
S1FLM
VF
1.1
V
S1FLB
IR
10
μA
S1FLD
IR
10
μA
S1FLG
IR
10
μA
S1FLJ
IR
10
μA
S1FLK
IR
10
μA
S1FLM
IR
10
μA
S1FLB
IR
50
μA
S1FLD
IR
50
μA
S1FLG
IR
50
μA
S1FLJ
IR
50
μA
S1FLK
IR
50
μA
S1FLM
IR
50
μA
S1FLB
trr
1800
ns
S1FLD
trr
1800
ns
S1FLG
trr
1800
ns
S1FLJ
trr
1800
ns
S1FLK
trr
1800
ns
S1FLM
trr
1800
S1FLB
Cj
4
pF
ns
S1FLD
Cj
4
pF
S1FLG
Cj
4
pF
S1FLJ
Cj
4
pF
S1FLK
Cj
4
pF
S1FLM
Cj
4
pF
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
Rev.1.2, 24-Oct-2019
Document Number: 81820
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.2
Instantaneous Reverse Current (µA)
100
Resistive or inductive load
Average Forward Current (A)
1.0
0.8
0.6
0.4
0.2
3.0 mm x 3.0 mm 40 µm
thick copper pad areas
0
TJ = 150 °C
10
TJ = 125 °C
TJ = 100 °C
1
TJ = 75 °C
TJ = 50 °C
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
120
140
160
Ambient Temperature (°C)
17375
0
100
Fig. 1 - Forward Current Derating Curve
200
300
400
500
600
700
800
900
Instantaneous Reverse Voltage (V)
17377
Fig. 3 - Typical Instantaneous Reverse Characteristics
10
Instantaneous Forward Current (mA)
1000
9
8
7
TJ = 150 °C
C (pF)
TJ = 25 °C
TJ = 100 °C
5
4
3
2
1
0
100
600
17376
6
0
700
800
900
1000
1100
17378
5
10
15
20
25
30
35
40
VR (V)
Instantaneous Forward Voltage (mV)
Fig. 4 - Capacitance vs. Reverse Voltage
Fig. 2 - Typical Instantaneous Forward Characteristics
Rev.1.2, 24-Oct-2019
Document Number: 81820
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): SMF (DO-219AB)
0.85 (0.033)
0 (0.000)
0.1 (0.004)
5
5
0.1(0.003)
1.7 (0.067)
Detail Z
enlarged
1.2 (0.047)
0.8 (0.031)
0.25 (0.010)
1.9 (0.075)
0.35 (0.014)
1.08 (0.043)
2.9 (0.114)
0.88 (0.035)
2.7 (0.106)
3.9 (0.154)
3.5 (0.138)
Foot print recommendation:
Created - Date: 15. February 2005
Rev. 3 - Date: 13. March 2007
Document no.: S8-V-3915.01-001 (4)
1.3 (0.051)
1.4 (0.055)
1.3 (0.051)
2.9 (0.114)
17247
Rev.1.2, 24-Oct-2019
Document Number: 81820
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com
Vishay Semiconductors
BLISTER TAPE DIMENSIONS in millimeters: SMF (DO-219AB)
PS
Document-No.: S8-V-3717.02-001 (3)
18513
Rev.1.2, 24-Oct-2019
Document Number: 81820
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
S1FLB, S1FLD, S1FLG, S1FLJ, S1FLK, S1FLM
www.vishay.com
Vishay Semiconductors
ORIENTATION IN CARRIER TAPE - SMF
Unreeling direction
SMF
cathode
Top view
Document no.: S8-V-3717.02-003 (4)
Created - Date: 09. Feb. 2010
22670
Rev.1.2, 24-Oct-2019
Document Number: 81820
6
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
S1FLM-GS08 S1FLD-GS08 S1FLJ-GS08 S1FLG-GS08 S1FLK-GS08 S1FLD-GS18 S1FLM-GS18 S1FLB-GS08