SAC50-E3/54

SAC5.0 thru SAC50 www.vishay.com Vishay General Semiconductor Low Capacitance TRANSZORB® Transient Voltage Suppressors FEATURES • Glass passivated chip junction • 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance DO-15 (DO-204AC) • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS VWM 5.0 V to 50 V VBR 7.6 V to 55.5 V PPPM 500 W PD 3.0 W TJ max. 175 °C Polarity Unidirectional Package DO-15 (DO-204AC) Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. MECHANICAL DATA Case: DO-15 (DO-204AC) Molded epoxy over passivated body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant and commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) PPPM 500 W Peak pulse current with a 10/1000 μs waveform (fig. 3) (1) IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (fig. 2) PD 3.0 W TJ, TSTG -55 to +175 °C Operating junction and storage temperature range Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A Revision: 16-Sep-2021 Document Number: 88379 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SAC5.0 thru SAC50 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PART NUMBER BREAKDOWN MAXIMUM MAXIMUM MAXIMUM VOLTAGE REVERSE MAXIMUM PEAK CLAMPING STAND-OFF AT LEAKAGE JUNCTION (1) PULSE VOLTAGE VOLTAGE IT = 1.0 mA AT CAPACITANCE CURRENT AT VWM VWM AT 0 V VBR (V) IPP = 5.0 A PER FIG. 3 (V) (pF) ID I V (V) (A) C PP MIN. (μA) WORKING INVERSE BLOCKING VOLTAGE VWIB (V) INVERSE BLOCKING LEAKAGE CURRENT VWIB IIB (mA) PEAK INVERSE BLOCKING VOLTAGE VPIB (V) SAC5.0 7.60 5 300 10.0 44 50 75 1.0 100 SAC6.0 7.90 6 300 11.2 41 50 75 1.0 100 SAC7.0 8.33 7 300 12.6 38 50 75 1.0 100 SAC8.0 8.89 8 100 13.4 36 50 75 1.0 100 SAC8.5 9.44 8.5 50 14.0 34 50 75 1.0 100 SAC10 11.10 10 5.0 16.3 29 50 75 1.0 100 SAC12 13.30 12 5.0 19.0 25 50 75 1.0 100 SAC15 16.70 15 5.0 23.6 20 50 75 1.0 100 SAC18 20.00 18 5.0 28.8 15 50 75 1.0 100 SAC22 24.40 22 5.0 35.4 14 50 75 1.0 100 SAC26 28.90 26 5.0 42.3 11.1 50 75 1.0 100 SAC30 33.30 30 5.0 48.6 10.0 50 75 1.0 100 SAC36 40.00 36 5.0 60.0 8.6 50 75 1.0 100 SAC45 50.00 45 5.0 77.0 6.8 50 150 1.0 200 SAC50 55.50 50 5.0 88.0 5.8 50 150 1.0 200 Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A ORDERING INFORMATION (Example) PREFERRED PIN SAC5.0-E3/54 UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.432 54 4000 13" diameter paper tape and reel Revision: 16-Sep-2021 Document Number: 88379 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SAC5.0 thru SAC50 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 150 Impulse Exponential Decay td PPK 10 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) Current Waveforms PPK “0.5” Half Sine td td = 7 tp PPK Square td 1 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 0.1 0.1 µs tr = 10 µs Peak Value IPPM 100 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 td - Pulse Width t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 4.0 Percentage of Rated Power (%) 100 Power Dissipation 75 Peak Power (Single Pulse) TJ = Initial Temperature Low Capacitance TVS 50 L = 0.375" (9.5 mm) Lead Lengths 25 Application Note: Device must be used with two units in parallel, opposite in polarity as shown in circuit for AC signal line protection. 0 0 25 50 75 100 125 150 175 TL - Lead Temperature (°C) Fig. 2 - Power Derating Curve Fig. 4 - AC Line Protection Application SCHEMATIC Diode Transient Voltage Suppressor Revision: 16-Sep-2021 Document Number: 88379 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SAC5.0 thru SAC50 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-15 (DO-204AC) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.242 (6.15) 0.258 (6.55) 0.130 (3.3) 0.138 (3.5) DIA. 1.0 (25.4) MIN. Note • Dimensions of mold length and diameter do not include mold flash and gate burr, mold flash shall not exceed 0.015 inch per side. These dimensions are measured at the outermost extreme of the plastic body Revision: 16-Sep-2021 Document Number: 88379 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000