SBL10L25, SBLF10L25, SBLB10L25
www.vishay.com
Vishay General Semiconductor
Low VF Schottky Barrier Rectifier
FEATURES
TO-220AC
ITO-220AC
• Power pack
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Very low forward voltage drop
• High forward surge capability
2
2
1
1
SBL10L25
SBLF10L25
PIN 1
PIN 2
PIN 1
CASE
PIN 2
D2PAK
(TO-263AB)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
2
1
SBLB10L25
TYPICAL APPLICATIONS
PIN 1
DESIGN SUPPORT TOOLS
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C for D2PAK (TO-263AB) package
• AEC-Q101 qualified
(for ITO-220AC and D2PAK (TO-263AB) package)
K
PIN 2
• High frequency operation
K
HEATSINK
click logo to get started
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Models
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code, e.g. A, B, ...)
Available
PRIMARY CHARACTERISTICS
VRRM
25 V
IFSM
240 A
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
IF(AV)
10 A
VF
0.35 V
Polarity: as marked
TJ max.
150 °C
Mounting Torque: 10 in-lbs maximum
Package
TO-220AC, ITO-220AC, D2PAK (TO-263AB)
Circuit configuration
Single
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SBLB10L25
Maximum repetitive peak reverse voltage
VRRM
25
Working peak reverse voltage
VRWM
18
Maximum DC blocking voltage
VDC
25
Maximum average forward rectified current at TC = 135 °C
IF(AV)
10
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load
IFSM
240
UNIT
V
A
Peak repetitive reverse surge current at tp = 2.0 μs, 1 kHz
IRRM
1.0
Voltage rate of change (rated VR)
dV/dt
10 000
V/μs
TJ, TSTG
-65 to +150
°C
VAC
1500
V
Operating junction and storage temperature range
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min
Revision: 13-Sep-2018
Document Number: 88723
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SBL10L25, SBLF10L25, SBLB10L25
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VF (1)
Maximum instantaneous forward voltage
IR (2)
Maximum instantaneous reverse current at DC blocking voltage
TEST CONDITIONS
VALUE
IF = 10 A
TJ = 25 °C
IF = 10 A
TJ = 125 °C
0.35
IF = 20 A
TJ = 25 °C
0.55
IF = 20 A
TJ = 125 °C
0.48
TJ = 25 °C
0.80
TJ = 125 °C
260
Rated VR
UNIT
0.46
V
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: pulse width 40 ms
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SBL
SBLF
SBLB
UNIT
RJC
1.5
4.0
1.5
°C/W
Typical thermal resistance from junction to case per leg
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
SBL10L25-E3/45
PREFERRED P/N
1.80
45
50/tube
Tube
ITO-220AC
SBLF10L25-E3/45
1.94
45
50/tube
Tube
TO-263AB
SBLB10L25-E3/45
1.33
45
50/tube
Tube
TO-263AB
SBLB10L25-E3/81
1.33
81
800/reel
Tape and reel
ITO-220AC
SBLF10L25HE3_A/P (1)
1.94
P
50/tube
Tube
TO-263AB
SBLB10L25HE3_B/P (1)
1.33
P
50/tube
Tube
TO-263AB
SBLB10L25HE3_B/I (1)
1.33
I
800/reel
Tape and reel
Note
(1) AEC-Q101 qualified, available in ITO-220AC and D2PAK (TO-263AB)
Revision: 13-Sep-2018
Document Number: 88723
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SBL10L25, SBLF10L25, SBLB10L25
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted)
10 000
Junction Capacitance (pF)
Average Forward Current (A)
12.5
10
7.5
5
2.5
0
100
10
50
100
150
1
100
10
Case Temperature (°C)
Reverse Voltage (V)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Junction Capacitance
100
Transient Thermal Impedance (°C/W)
100
Instantaneous Forward Current (A)
1000
TJ = 175 °C
10
TJ = 150 °C
TJ = 25 °C
1
TJ = 100 °C
0.1
TJ = 125 °C
0.01
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
10
1
0.1
0.01
0.1
1
10
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 2 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Transient Thermal Impedance
Instantaneous Reverse Current (mA)
1000
TJ = 150 °C
100
TJ = 125 °C
10
TJ = 100 °C
1.0
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 3 - Typical Reverse Characteristics
Revision: 13-Sep-2018
Document Number: 88723
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SBL10L25, SBLF10L25, SBLB10L25
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AC
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.635 (16.13)
0.625 (15.87)
1
PIN
0.350 (8.89)
0.330 (8.38)
0.603 (15.32)
0.573 (14.55)
1.148 (29.16)
1.118 (28.40)
2
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
PIN 1
CASE
PIN 2
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
ITO-220AC
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.076 (1.93) REF.
45° REF.
0.600 (15.24)
0.580 (14.73)
0.671 (17.04)
0.651 (16.54)
PIN
1
2
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.025 (0.64)
0.015 (0.38)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
D2PAK (TO-263AB)
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.110 (2.79)
0.100 (2.54)
0.028 (0.71)
0.020 (0.51)
Mounting Pad Layout
0.42 (10.66) min.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) min.
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) min.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 13-Sep-2018
Document Number: 88723
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
