SBYV26C-E3/54

Not for New Designs SBYV26C www.vishay.com Vishay General Semiconductor Glass Passivated Ultrafast Plastic Rectifier FEATURES • Superectifier structure for high reliability condition • Cavity-free glass-passivated junction SUPERECTIFIER® • Ideal for printed circuit boards • Ultrafast reverse recovery time • Low forward voltage drop • Low leakage current • Low switching losses, high efficiency DO-41 (DO-204AL) • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 600 V IFSM 30 A trr 30 ns VF 1.3 V TJ max. 175 °C Package DO-41 (DO-204AL) Circuit configuration Single TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-41 (DO-204AL), molded plastic over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant and commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum RMS voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TL = 85 °C (fig. 1) IF(AV) 1.0 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 30 A Non repetitive peak reverse energy ERSM (1) 5.0 mJ Operating junction and storage temperature range TJ, TSTG -65 to +175 °C Note (1) Peak reverse energy measured with 8/20 μs surge Revision: 06-Oct-2021 Document Number: 88735 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs SBYV26C www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Minimum avalanche breakdown voltage 100 μA Maximum instantaneous forward voltage 1.0 A SYMBOL VALUE UNIT VBR 600 V TJ = 25 °C TJ = 175 °C TA = 25 °C Maximum DC reverse current at rated DC blocking voltage 2.5 VF 5.0 IR TA = 165 °C V 1.3 μA 150 Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 30 ns Maximum junction capacitance 4.0 V, 1 MHz CJ 45 pF Maximum reverse recovery current slope IF = 1 A, VR = 30 V, dIf/dt = - 1 A/μs dIr/dt 7.0 A/μs SYMBOL VALUE UNIT RθJA (1) 70 RθJL (2) 16 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance °C/W Notes (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, mounted on PCB with 0.5" x 0.5" (12 mm x 12 mm) copper pads (2) Thermal resistance from junction to lead at 0.375" (9.5 mm) lead length with both leads attached to heatsink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SBYV26C-E3/54 0.339 54 5500 13" diameter paper tape and reel SBYV26C-E3/73 0.339 73 3000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.8 TL = Lead Temperature 1.0 D = 0.3 0.8 TA = Ambient Temperature 0.6 0.4 Mounted on P.C.B. D = 0.5 D = 0.8 D = 0.2 1.6 Lead Mounted on Heatsink Average Power Loss (W) Average Forward Rectified Current (A) 1.2 D = 0.1 1.4 D = 1.0 1.2 1.0 0.8 T 0.6 0.4 0.2 0.2 0 D = tp/T tp 0 0 25 50 75 100 125 150 175 0 0.2 0.4 0.6 0.8 1.0 1.2 Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 06-Oct-2021 Document Number: 88735 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs SBYV26C www.vishay.com Vishay General Semiconductor 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ Max. 10 ms Single Half Sine-Wave Junction Capacitance (pF) Peak Forward Surge Current (A) 100 10 1 0.1 1 1 10 10 100 1 10 100 Number of Cycles at 50 Hz Reverse Voltage (V) Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 6 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TJ = 165 °C 10 TJ = 125 °C 1 TJ = 25 °C 0.1 Pulse Width = 300 μs 1 % Duty Cycle 0.01 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 10 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 7 - Typical Transient Thermal Impedance Instantaneous Reverse Leakage Current (μA) 100 10 TJ = 165 °C TJ = 125 °C 1 0.1 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Typical Reverse Leakage Characteristics Revision: 06-Oct-2021 Document Number: 88735 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs SBYV26C www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-41 (DO-204AL) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Revision: 06-Oct-2021 Document Number: 88735 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000