SE07PD-M3/85A

SE07PB, SE07PD, SE07PG, SE07PJ www.vishay.com Vishay General Semiconductor Surface-Mount ESD Capability Rectifiers FEATURES eSMP ® Series • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Oxide planar chip junction • Low forward voltage drop • Typical IR less than 0.1 μA • ESD capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMP (DO-220AA) Cathode • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Anode TYPICAL APPLICATIONS ADDITIONAL RESOURCES General purpose, polarity protection, and rail-to-rail protection in consumer applications. 3D 3D 3D Models MECHANICAL DATA Case: SMP (DO-220AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade PRIMARY CHARACTERISTICS IF(AV) 0.7 A VRRM 100 V, 200 V, 400 V, 600 V IR 5 μA VF at IF = 1.0 A 0.865 V TJ max. 175 °C Package SMP (DO-220AA) Circuit configuration Single Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code SE07PB SE07PD SE07PG SE07PJ 07B 07D 07G 07J 100 200 400 600 UNIT Max. repetitive peak reverse voltage VRRM Average forward current IF(AV) 1.0 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 20 A TJ, TSTG -55 to +175 °C Operating junction and storage temperature range V ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Max. instantaneous forward voltage IF = 0.7 A Max. reverse current Rated VR Typical junction capacitance 4.0 V, 1 MHz TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL VF (1) IR (2) CJ TYP. MAX. 0.965 1.05 0.865 0.95 - 5.0 3.7 50 5.0 - UNIT V μA pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Revision: 20-Feb-2020 Document Number: 89023 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE07PB, SE07PD, SE07PG, SE07PJ www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance SE07PB SE07PD SE07PG RθJA (1) 105 RθJL (1) 25 RθJC (1) 30 SE07PJ UNIT °C/W Note (1) Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. R θJL - is measured at the terminal of cathode band. RθJC is measured at the top center of the body. IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE JESD22-A114 Human body model (contact mode) C = 100 pF, R = 1.5 kΩ 3B > 8 kV JESD22-A115 Machine model (contact mode) C = 200 pF, R = 0 Ω C > 400 V Human body model (contact mode) C = 150 pF, R = 330 Ω Human body model (air-discharge mode) (1) C = 150 pF, R = 330 Ω IEC 61000-4-2 (2) VC 4 > 8 kV 4 > 15 kV Notes Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV (2) System ESD standard (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SE07PJ-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel SE07PJ-M3/85A 0.024 85A 10 000 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 0.8 0.9 D = 0.5 D = 0.8 0.8 0.7 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 0.6 0.5 0.4 0.3 0.2 TL Measured at the Cathode Band Terminal 0.1 D = 0.3 0.7 D = 0.2 D = 0.1 0.6 D = 1.0 0.5 0.4 T 0.3 0.2 D = tp/T 0.1 0 tp 0 0 25 50 75 100 125 150 175 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Lead Temperature (°C) Average Forward Current (A) Fig. 1 - Max. Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 20-Feb-2020 Document Number: 89023 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE07PB, SE07PD, SE07PG, SE07PJ www.vishay.com Vishay General Semiconductor Axis Title 100 10000 Junction Capacitance (pF) TJ = 175 °C 1000 TJ = 150 °C 1st line 2nd line 2nd line Instantaneous Forward Current (A) 10 1 TJ = 25 °C 100 TJ = -40 °C 0.1 10 0.6 0.8 1.0 1.2 1.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 1.6 0.1 Instantaneous Forward Voltage (V) 1 10 100 Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance Axis Title 10000 TJ = 175 °C TJ = 150 °C 10 1 1000 0.1 1st line 2nd line 2nd line Instantaneous Reverse Current (PA) 100 TJ = 25 °C 0.01 100 TJ = -40 °C 0.001 0.0001 10 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMP (DO-220AA) 0.012 (0.30) REF. Cathode Band 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.036 (0.91) 0.024 (0.61) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.158 (4.00) 0.146 (3.70) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.025 0.030 (0.635) (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.050 (1.27) Revision: 20-Feb-2020 Document Number: 89023 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000