SE10DG-M3/I

SE10DB, SE10DD, SE10DG, SE10DJ www.vishay.com Vishay General Semiconductor Surface-Mount ESD Capability Rectifiers FEATURES ® • Very low profile - typical height of 1.7 mm eSMP Series SMPD (TO-263AC) Available • Ideal for automated placement • Oxide planar chip junction • Low forward voltage drop K • ESD capability • AEC-Q101 qualified 1 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 2 Top View Bottom View • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SE10DX TYPICAL APPLICATIONS Anode 1 K Anode 2 Cathode General purpose, power line polarity protection, in both consumer and automotive applications. ADDITIONAL RESOURCES MECHANICAL DATA 3D 3D Case: SMPD (TO-263AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified 3D Models PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 100 V, 200 V, 400 V, 600 V IFSM 110 A VF at IF = 10 A (TA = 125 °C) 0.96 V IR 15 μA TJ max. 175 °C Package SMPD (TO-263AC) Circuit configuration Single Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: as marked MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum DC forward current Peak forward surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL SE10DB SE10DD VRRM 100 200 SE10DG SE10DJ UNIT 400 600 V IF (1) 10 IF (2) 3.0 IFSM 110 A TJ, TSTG -55 to +175 °C A Notes (1) With heatsink (2) Free air, mounted on recommended copper pad area Revision: 26-Feb-2020 Document Number: 89983 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE10DB, SE10DD, SE10DG, SE10DJ www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 5 A Instantaneous forward voltage SYMBOL TA = 25 °C IF = 10 A VF (1) IF = 5 A TA = 125 °C IF = 10 A TA = 25 °C IR (2) TYP. MAX. 0.95 - 1.04 1.15 0.85 - 0.96 1.10 - 15 22 150 UNIT V μA Reverse current Rated VR Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 3000 - ns Typical junction capacitance 4.0 V, 1 MHz CJ 67 - pF TA = 125 °C Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance SE10DB SE10DD SE10DG RθJA (1)(2) 60 RθJC (3) 1.6 SE10DJ UNIT °C/W Notes (1) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J θJA (2) Free air, mounted on recommended PCB, 2 oz. pad area; thermal resistance R θJA - junction to ambient (3) With infinite heatsink IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD AEC-Q101-001 TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE Human body model (contact mode) C = 100 pF, R = 1.5 kΩ VC H3B > 8 kV ORDERING INFORMATION (Example) STANDARD PREFERRED P/N SMPD (TO-263AC) SE10DJ-M3/I SMPD (TO-263AC) SE10DJHM3/I (1) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.54 I 2000/reel 13" diameter plastic tape and reel 0.54 I 2000/reel 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 26-Feb-2020 Document Number: 89983 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE10DB, SE10DD, SE10DG, SE10DJ www.vishay.com Vishay General Semiconductor 11 Instantaneous Reverse Current (ƶA) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) RthJC= 1.6 oC/W 10 9 8 7 6 5 4 Free air, TA, RthJA= 60 oC/W 3 2 1 0 0 25 50 75 100 125 150 175 1000 TJ = 175 °C 100 10 TJ = 75 °C 0.1 TJ = 25 °C 0.01 0.001 TJ = -40 °C 0.0001 10 Case Temperature (°C) 30 40 60 70 80 90 100 1000 13.0 12.0 11.0 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 D = 0.5 D = 0.3 D = 0.2 D = 1.0 D = 0.1 T D = tp/T tp 100 10 0 1 2 3 4 5 6 7 8 9 0.1 10 11 12 1 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C TJ = 75 °C TJ = 25 °C 0.1 TJ = -40 °C 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 100 Fig. 5 - Typical Junction Capacitance Transient Thermal Impedance (°C/W) Fig. 2 - Forward Power Loss Characteristics 100 10 Reverse Voltage (V) Average Forward Current (A) Instantaneous Forward Current (A) 50 Fig. 4 - Typical Reverse Leakage Characteristics Junction Capacitance (pF) Average Power Loss (W) 20 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve 1 TJ = 125 °C TJ = 150 °C 1 100 Junction to Ambient 10 1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 26-Feb-2020 Document Number: 89983 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE10DB, SE10DD, SE10DG, SE10DJ www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMPD (TO-263AC) 0.402 (10.20) 0.386 (9.80) 0.059 (1.50) REF. 0.071 (1.80) 0.063 (1.60) 0.020 (0.52) 0.011 (0.27) 0.048 (1.21) 0.032 (0.81) 0.354 (8.99) 0.338 (8.59) 0.509 (12.93) 0.485 (12.33) 0 to 0.01 (0 to 0.254) 0.069 (1.74) 0.053 (1.34) 0.063 (1.60) 0.047 (1.20) 0.020 (0.52) 0.011 (0.27) 0.052 (1.23) 0.028 (0.72) 0.200 NOM. (5.08) Mounting Pad Layout 0.420 (10.66) MIN. 0.339 (8.60) 0.323 (8.20) 0.276 (7.00) 0.260 (6.60) 0.330 REF. (8.38) 0.194 (4.93) NOM. 0.604 (15.33) 0.525 (13.33) 0.120 (3.05) REF. 0.080 (2.03) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 26-Feb-2020 Document Number: 89983 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000