SE40PWBCHM3/I

SE40PWBC, SE40PWDC, SE40PWGC, SE40PWJC www.vishay.com Vishay General Semiconductor Surface-Mount ESD Capability Rectifier FEATURES eSMP® Series • Very low profile - typical height of 1.3 mm Available • Ideal for automated placement • Oxide planar chip junction K • Low forward voltage drop • ESD capability 1 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 2 • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 SlimDPAK (TO-252AE) PIN 1 PIN 2 K • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 HEATSINK TYPICAL APPLICATIONS LINKS TO ADDITIONAL RESOURCES General purpose, power line polarity protection, in both industry and automotive applications. 3D 3D 3D Models MECHANICAL DATA Case: SlimDPAK (TO-252AE) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified PRIMARY CHARACTERISTICS IF(AV) 2x2A VRRM 100 V, 200 V, 400 V, 600 V IFSM 36 A VF at IF = 2 A (TA = 125 °C) 0.92 V TJ max. 175 °C Package SlimDPAK (TO-252AE) Circuit configuration Common cathode Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102, M3 and HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) VRRM per device per diode Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range IF(AV) (1) SE40PWBC SE40PWDC SE40PWGC SE40PWJC SE40PWBC SE40PWDC SE40PWGC SE40PWJC 100 200 400 600 4 2 UNIT V A IFSM 36 A TJ, TSTG -55 to +175 °C Note (1) With infinite heatsink Revision: 16-Apr-2020 Document Number: 87538 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE40PWBC, SE40PWDC, SE40PWGC, SE40PWJC www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 1.0 A Maximum Instantaneous forward voltage TA = 25 °C IF = 2.0 A VF (1) IF = 1.0 A TA = 125 °C IF = 2.0 A Reverse current SYMBOL TA = 25 °C Rated VR TA = 125 °C IR (2) TYP. MAX. 0.94 - 1.01 1.10 0.84 - 0.92 1.01 - 10 12 150 UNIT V μA Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 1500 - ns Typical junction capacitance 4.0 V, 1 MHz CJ 14 - pF SE40PWGC SE40PWJC UNIT Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance per device SE40PWBC SE40PWDC RθJA (1)(2) 63 RθJM (3) 2.5 °C/W Notes (1) The heat generated must be less than thermal conductivity from junction-to-ambient: dP /dT < 1/R D J θJA (2) Free air, mounted on recommended copper pad area; thermal resistance R θJA - junction to ambient (3) Mounted on infinite heat sink; thermal resistance R θJM - junction-to-mount IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD AEC-Q101-001 TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE Human body model (contact mode) C = 100 pF, R = 1.5 kΩ VC H3B > 8 kV ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SE40PWJC-M3/I 0.20 I 4500 13" diameter plastic tape and reel SE40PWJCHM3/I (1) 0.20 I 4500 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Revision: 16-Apr-2020 Document Number: 87538 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE40PWBC, SE40PWDC, SE40PWGC, SE40PWJC www.vishay.com Vishay General Semiconductor 5.0 Instantaneous Reverse Current (˩A) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) TM = 165 ƱC, RthJM = 2.5 ƱC/W 4.0 3.0 2.0 TA = 25 ƱC, RthJA = 63 ƱC/W 1.0 0 0 25 50 75 100 125 150 1000 100 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 25 °C 0.01 TJ = -40 °C 0.001 175 10 Mount Temperature (°C) 20 30 40 50 60 100 100 Junction Capacitance (pF) D = 0.8 Average Power Loss (W) 90 Fig. 4 - Typical Reverse Leakage Characteristics 2.5 D = 0.5 2.0 D = 0.3 1.5 D = 1.0 D = 0.2 D = 0.1 1.0 T 0.5 D = tp/T TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 tp 1 0.0 0 0.5 1 1.5 2 0.1 2.5 1 Average Forward Current (A) Transient Thermal Impedance (°C/W) TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C 0.1 TJ = 25 °C TJ = -40 °C 0.01 0.3 0.6 0.9 1.2 1.5 1.8 100 Fig. 5 - Typical Junction Capacitance 100 10 10 Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Instantaneous Forward Current (A) 80 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve 1 70 2.1 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 100 Junction to Ambient 10 1 0.1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 16-Apr-2020 Document Number: 87538 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE40PWBC, SE40PWDC, SE40PWGC, SE40PWJC www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SlimDPAK (TO-252AE) 0.055 (1.40) 0.047 (1.20) 0.249 (6.32) 0.239 (6.08) 0.016 (0.41) 0.010 (0.25) 0.028 (0.70) 0.012 (0.30) 0.265 (6.72) 0.255 (6.48) 0.370 (9.40) 0.339 (8.60) 0.008 0.000 0.055 0.039 0.090 NOM. (2.29) (0.20) (0.00) (1.40) (1.00) 0.180 NOM. (4.57) Mounting Pad Layout 0.240 MIN. (6.10) 0.224 (5.70) 0.209 (5.30) 0.205 NOM. (5.20) 0.235 MIN. (5.97) 0.386 REF. (9.80) 0.075 MIN. (1.90) 0.035 (0.90) 0.028 (0.70) 0.090 NOM. (2.29) 0.055 MIN. (1.40) Revision: 16-Apr-2020 Document Number: 87538 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000