SE50PAB, SE50PAD, SE50PAG, SE50PAJ
www.vishay.com
Vishay General Semiconductor
Surface-Mount ESD Capability Rectifiers
FEATURES
eSMP® Series
• Very low profile - typical height of 0.95 mm
K
Available
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop, low leakage current
A
• ESD capability
Top View
Bottom View
• Meets MSL level 1, per
LF maximum peak of 260 °C
SMPA (DO-221BC)
J-STD-020,
• Not recommended for PCB bottom side wave mounting
Anode
• AEC-Q101 qualified
Cathode
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
TYPICAL APPLICATIONS
3D 3D
General purpose, power line polarity protection, in both
consumer and automotive applications.
3D Models
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
5.0 A
VRRM
100 V, 200 V, 400 V, 600 V
IFSM
42 A
VF at IF = 5.0 A (TA = 125 °C)
0.95 V
IR
10 μA
TJ max.
175 °C
Package
SMPA (DO-221BC)
Circuit configuration
Single
Case: SMPA (DO-221BC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Polarity: color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum DC forward current
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature range
VRRM
SE50PAB
SE50PAD
SE50PAG
SE50PAJ
50B
50D
50G
50J
100
200
400
600
UNIT
V
IF (1)
5.0
IF (2)
1.6
IFSM
42
A
TJ, TSTG
-55 to +175
°C
A
Notes
(1) Mounted on 30 mm x 30 mm pad areas, aluminum PCB
(2) Free air, mounted on recommended copper pad area
Revision: 16-Jun-2020
Document Number: 87703
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE50PAB, SE50PAD, SE50PAG, SE50PAJ
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 2.5 A
Instantaneous forward voltage
TA = 25 °C
IF = 5.0 A
VF (1)
IF = 2.5 A
TA = 125 °C
IF = 5.0 A
Reverse current
SYMBOL
TA = 25 °C
Rated VR
TYP.
MAX.
0.94
-
1.03
1.16
0.84
-
0.95
1.10
IR (2)
TA = 125 °C
-
10
13
150
UNIT
V
μA
Typical reverse recovery time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
trr
2.0
-
μs
Typical junction capacitance
4.0 V, 1 MHz
CJ
32
-
pF
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
SE50PAB
SE50PAD
SE50PAG
RJA (1)
115
RJM (2)
7
SE50PAJ
UNIT
°C/W
Notes
(1) Free air, mounted on recommended PCB, 2 oz. pad area; thermal resistance R
JA - junction to ambient
(2) Mounted on 30 mm x 30 mm pad areas aluminum PCB; R
JM - junction to mount
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C unless otherwise noted)
STANDARD
AEC-Q101-001
TEST TYPE
TEST CONDITIONS
Human body model (contact mode)
SYMBOL
CLASS
VALUE
VC
H3B
> 8 kV
C = 100 pF, R = 1.5 k
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
13" diameter plastic tape and reel
SE50PAJ-M3/I
0.033
I
14 000
SE50PAJHM3/H (1)
0.033
H
3500
7" diameter plastic tape and reel
SE50PAJHM3/I (1)
0.033
I
14 000
13" diameter plastic tape and reel
Note
(1) AEC-Q101 qualified
Revision: 16-Jun-2020
Document Number: 87703
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE50PAB, SE50PAD, SE50PAG, SE50PAJ
www.vishay.com
Vishay General Semiconductor
6
Instantaneous Reverse Current (μA)
Average Forward Rectified Current (A)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
TM = 138 °C/W RthJM = 7 °C/W
5
4
3
2
Free air, RthJA = 115 °C/W
1
0
TM measured at cathode band
terminal PCB mount
0
25
50
75
100
125
150
1000
TA = 175 °C
100
10
TA = 125 °C
TA = 25 °C
0.01
0.001
TA = -40 °C
0.0001
10
Case Temperature (°C)
20
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Leakage Characteristics
100
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.8
D = 0.5
Junction Capacitance (pF)
Average Power Loss (W)
TA = 100 °C
0.1
175
Fig. 1 - Maximum Forward Current Derating Curve
D = 0.3
D = 1.0
D = 0.2
D = 0.1
T
D = tp/T
10
tp
1
0
1
2
3
4
5
0.1
6
1
Average Forward Current (A)
Transient Thermal Impedance (°C/W)
TA = 175 °C
10
TA = 150 °C
TA = 125 °C
TA = 75 °C
TA = 25 °C
TA = -40 °C
0.1
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
100
Fig. 5 - Typical Junction Capacitance
100
1
10
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Instantaneous Forward Current (A)
TA = 150 °C
1
1.2
1.3
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
1000
Junction to Ambient
100
10
1
0.01
0.1
1
10
100
t - Pulse Duration (s)
Fig. 6 - Typical Transient Thermal Impedances
Revision: 16-Jun-2020
Document Number: 87703
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE50PAB, SE50PAD, SE50PAG, SE50PAJ
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMPA (DO-221BC)
0.059 (1.50)
0.030 (0.75)
0.122 (3.10)
0.098 (2.50)
Cathode Band
0.057 (1.45)
0.049 (1.25)
0.106 (2.70)
0.098 (2.50)
0.171 (4.35)
0.163 (4.15)
0.211 (5.35)
0.199 (5.05)
0.087 (2.20)
0.063 (1.6)
0.059 (1.50)
0.030 (0.75)
Typ.: 0.019 (0.48)
Mounting Pad Layout
MAX. 0.037 (0.92)
0.039 (1.00)
0.035 (0.90)
0.012 (0.30)
0.006 (0.15)
0.087 (2.20)
MIN.
0.060 (1.52)
MIN.
MIN. 0.122 (3.10)
MIN.
0.059 (1.50)
0.217 (5.52)
Revision: 16-Jun-2020
Document Number: 87703
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000