SE70PB, SE70PD, SE70PG, SE70PJ
www.vishay.com
Vishay General Semiconductor
Surface-Mount ESD Capability Rectifiers
FEATURES
• Very low profile - typical height of 1.1 mm
eSMP ® Series
Available
• Ideal for automated placement
• Oxide planar chip junction
K
• Low forward voltage drop
• ESD capability
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 260 °C
1
2
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
SMPC (TO-277A)
K
Cathode
DESIGN SUPPORT TOOLS
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Anode 1
Anode 2
TYPICAL APPLICATIONS
click logo to get started
General purpose, power line polarity protection in both
consumer and automotive applications.
Models
Available
MECHANICAL DATA
Case: SMPC (TO-277A)
PRIMARY CHARACTERISTICS
IF(AV)
7.0 A
VRRM
100 V to 600 V
IFSM
120 A
IR
10 μA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3_X - halogen-free, RoHS-compliant and
AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
VF at IF = 7.0 A, (125 °C)
0.87 V
TJ max.
175 °C
Package
SMPC (TO-277A)
Circuit configuration
Single
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum DC forward current
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature range
VRRM
SE70PB
SE70PD
SE70PG
SE70PJ
70B
70D
70G
70J
100
200
400
600
UNIT
V
(1)
7.0
IF (2)
2.9
IFSM
120
A
TJ, TSTG
-55 to +175
°C
IF
A
Notes
(1) Mounted on 30 mm x 30 mm pad areas, 2 oz. FR4 PCB
(2) Free air, mounted on recommended copper pad area
Revision: 29-Jan-2019
Document Number: 87955
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE70PB, SE70PD, SE70PG, SE70PJ
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 3.5 A
Instantaneous forward voltage
IF = 7.0 A
IF = 3.5 A
IF = 7.0 A
SYMBOL
TA = 25 °C
VF (1)
TA = 125 °C
TA = 25 °C
TYP.
MAX.
0.90
-
0.97
1.05
0.79
-
0.87
0.96
0.1
10
20
150
IR (2)
UNIT
V
μA
Reverse current
rated VR
Typical reverse recovery time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
trr
2.6
-
μs
Typical junction capacitance
4.0 V, 1 MHz
CJ
76
-
pF
TA = 125 °C
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
SE70PB
SE70PD
SE70PG
RJA (1)
62
RJM (2)
5
SE70PJ
UNIT
°C/W
Notes
(1) Free air, mounted on recommended PCB 1 oz. pad area; thermal resistance R
JA - junction to ambient
(2) Units mounted on PCB with 30 mm x 30 mm pad areas, 2 oz. FR4 PCB; R
JM - junction to mount
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C, unless otherwise noted
STANDARD
AEC-Q101-001
TEST TYPE
TEST CONDITIONS
SYMBOL
CLASS
VALUE
Human body model
(contact mode)
C = 100 pF, R = 1.5 k
VC
H3B
> 8 kV
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SE70PJ-M3/86A
0.10
86A
1500
7" diameter plastic tape and reel
SE70PJ-M3/87A
0.10
87A
6500
13" diameter plastic tape and reel
SE70PJHM3_A/H (1)
0.10
H
1500
7" diameter plastic tape and reel
0.10
I
6500
13" diameter plastic tape and reel
SE70PJHM3_A/I
(1)
Note
(1) AEC-Q101 qualified
Revision: 29-Jan-2019
Document Number: 87955
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE70PB, SE70PD, SE70PG, SE70PJ
www.vishay.com
Vishay General Semiconductor
8
Instantaneous Reverse Current (ƶA)
Average Forward Rectified Current (A)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
RthJ-M = 5.0 °C/W
7
6
5
4
TA = 25 °C
3
2
1
TM measured at cathode band
terminal PCB mount
0
0
25
50
75
100
125
150
1000
TJ = 175 °C
100
10
TJ = 150 °C
TJ = 75 °C
0.1
TJ = 25 °C
0.01
TJ = -40 °C
0.001
0.0001
175
10
Mount Temperature °( C)
30
40
50
60
70
80
90
100
Fig. 4 - Typical Reverse Leakage Characteristics
8.0
1000
D = 0.8
D = 0.5
7.0
D = 0.3
Junction Capacitance (pF)
Average Power Loss (W)
20
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
6.0
D = 1.0
D = 0.2
5.0
D = 0.1
4.0
3.0
T
2.0
1.0
D = tp/T
tp
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
10
1
0.0
1
2
3
4
5
6
7
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
100
TJ = 175 °C
10
TJ = 150 °C
1
0.1
8
TJ = 125 °C
TJ = 75 °C
TJ = 25 °C
0.1
TJ = -40 °C
0.01
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Transient Thermal Impedance (°C/W)
0
Instantaneous Forward Current (A)
TJ = 125 °C
1
100
Junction to Ambient
10
1
0.1
0.01
0.1
1
10
100
t - Pulse Duration (s)
Fig. 6 - Typical Transient Thermal Impedance
Revision: 29-Jan-2019
Document Number: 87955
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE70PB, SE70PD, SE70PG, SE70PJ
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMPC (TO-277A)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC® TO-277A
Revision: 29-Jan-2019
Document Number: 87955
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000