SE70PJ-M3/86A

SE70PB, SE70PD, SE70PG, SE70PJ www.vishay.com Vishay General Semiconductor Surface-Mount ESD Capability Rectifiers FEATURES • Very low profile - typical height of 1.1 mm eSMP ® Series Available • Ideal for automated placement • Oxide planar chip junction K • Low forward voltage drop • ESD capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C 1 2 • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 SMPC (TO-277A) K Cathode DESIGN SUPPORT TOOLS • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Anode 1 Anode 2 TYPICAL APPLICATIONS click logo to get started General purpose, power line polarity protection in both consumer and automotive applications. Models Available MECHANICAL DATA Case: SMPC (TO-277A) PRIMARY CHARACTERISTICS IF(AV) 7.0 A VRRM 100 V to 600 V IFSM 120 A IR 10 μA Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3_X - halogen-free, RoHS-compliant and AEC-Q101 qualified  (“_X” denotes revision code e.g. A, B,.....) VF at IF = 7.0 A, (125 °C) 0.87 V TJ max. 175 °C Package SMPC (TO-277A) Circuit configuration Single Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Maximum DC forward current Peak forward surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM SE70PB SE70PD SE70PG SE70PJ 70B 70D 70G 70J 100 200 400 600 UNIT V (1) 7.0 IF (2) 2.9 IFSM 120 A TJ, TSTG -55 to +175 °C IF A Notes (1) Mounted on 30 mm x 30 mm pad areas, 2 oz. FR4 PCB (2) Free air, mounted on recommended copper pad area Revision: 29-Jan-2019 Document Number: 87955 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE70PB, SE70PD, SE70PG, SE70PJ www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 3.5 A Instantaneous forward voltage IF = 7.0 A IF = 3.5 A IF = 7.0 A SYMBOL TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TYP. MAX. 0.90 - 0.97 1.05 0.79 - 0.87 0.96 0.1 10 20 150 IR (2) UNIT V μA Reverse current rated VR Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.6 - μs Typical junction capacitance 4.0 V, 1 MHz CJ 76 - pF TA = 125 °C Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance SE70PB SE70PD SE70PG RJA (1) 62 RJM (2) 5 SE70PJ UNIT °C/W Notes (1) Free air, mounted on recommended PCB 1 oz. pad area; thermal resistance R JA - junction to ambient (2) Units mounted on PCB with 30 mm x 30 mm pad areas, 2 oz. FR4 PCB; R JM - junction to mount IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS  (TA = 25 °C, unless otherwise noted STANDARD AEC-Q101-001 TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE Human body model (contact mode) C = 100 pF, R = 1.5 k VC H3B > 8 kV ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SE70PJ-M3/86A 0.10 86A 1500 7" diameter plastic tape and reel SE70PJ-M3/87A 0.10 87A 6500 13" diameter plastic tape and reel SE70PJHM3_A/H (1) 0.10 H 1500 7" diameter plastic tape and reel 0.10 I 6500 13" diameter plastic tape and reel SE70PJHM3_A/I (1) Note (1) AEC-Q101 qualified Revision: 29-Jan-2019 Document Number: 87955 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE70PB, SE70PD, SE70PG, SE70PJ www.vishay.com Vishay General Semiconductor 8 Instantaneous Reverse Current (ƶA) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) RthJ-M = 5.0 °C/W 7 6 5 4 TA = 25 °C 3 2 1 TM measured at cathode band terminal PCB mount 0 0 25 50 75 100 125 150 1000 TJ = 175 °C 100 10 TJ = 150 °C TJ = 75 °C 0.1 TJ = 25 °C 0.01 TJ = -40 °C 0.001 0.0001 175 10 Mount Temperature °( C) 30 40 50 60 70 80 90 100 Fig. 4 - Typical Reverse Leakage Characteristics 8.0 1000 D = 0.8 D = 0.5 7.0 D = 0.3 Junction Capacitance (pF) Average Power Loss (W) 20 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve 6.0 D = 1.0 D = 0.2 5.0 D = 0.1 4.0 3.0 T 2.0 1.0 D = tp/T tp TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 10 1 0.0 1 2 3 4 5 6 7 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 100 TJ = 175 °C 10 TJ = 150 °C 1 0.1 8 TJ = 125 °C TJ = 75 °C TJ = 25 °C 0.1 TJ = -40 °C 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Transient Thermal Impedance (°C/W) 0 Instantaneous Forward Current (A) TJ = 125 °C 1 100 Junction to Ambient 10 1 0.1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 29-Jan-2019 Document Number: 87955 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SE70PB, SE70PD, SE70PG, SE70PJ www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMPC (TO-277A) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 29-Jan-2019 Document Number: 87955 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000