SI9706DY-T1-E3

End of Life. Last Available Purchase Date is 31-Dec-2014 Si9706DY Vishay Siliconix PC Card (PCMCIA) Interface Switch FEATURES Single SO-8 Package CMOS-Logic Compatible Inputs Slow VCC Ramp Time Smart Switching Extremely Low RON Reverse Blocking Switches Low Power Consumption Safe Power Up DESCRIPTION The Si9706DY offers an integrated solution for PC Card power interfaces that only require VCC switching. This part is ideal for systems that operate at 5 V and provide VPP from the main supply or from a dedicated Flash RAM 12-V supply. positive or negative control logic for compatibility with a variety of PC Card controllers. These control inputs are CMOS logic compatible and can be driven to 3.3 V or 5 V. The Si9706DY operates off the 5-V supply and has built-in level shifting for gate drive. Internal logic protects against a control logic error that would short 5 V to the 3.3-V supply. This protection logic also allows the Si9706DY to be configured for The Si9706DY PC Card interface switch is packaged in a narrow body SO-8 package and is rated over the industrial temperature range −40 to 85 C. The Si9706DY is available in lead free. FUNCTIONAL BLOCK DIAGRAM +5 VIN +3.3 VIN (7) (6) SW1 (2) SW2 (3) VCC VCC SW3 S1 S2 SR Document Number: 70010 S-40127—Rev. G, 16-Feb-04 (5) (4) (8) Level Shift and Drivers (1) GND www.vishay.com 1 Si9706DY Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Voltages Referenced to Ground +5 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V +3.3 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V S1 , S2 (CMOS Inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V All Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V IOUT VCCa ....................................................4A PD Maxb: . (TA = 25_C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.59 W (TA = 85_C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.63 W Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125_C Thermal Ratingsb: RQJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 _C/W Notes a. Pins 2, 3 connected together externally. b. Mounted on 1-IN2, FR4 PC Board. RECOMMENDED OPERATING CONDITIONS +5 VIN (must be present) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V "10% +3.3 VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 V "10% CSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 nF IOUT VCCa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A VCC Load Capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mF Max Notes a. Pins 2, 3 connected together externally. SPECIFICATIONS Test Conditions Unless Otherwise Specified Parameter Symbol CSR = 33 nF, +5 VIN = 5 V +3.3 VIN = 3.3 V, Low v 0.8 V, High w 2.2 V Limits Mina Typb Maxa Unit Switch SW1 On Resistance On-Resistance RON I = 500 mA, S1 = High S2 = Low TA = 25_C 58 70 TA = 85_C 73 90 Off Current (VCC) IOFF +5 VIN = 5.5 V, VCC = 0 V S1= S2 = Low TA = 25_C 1 TA = 85_C 10 Rise Time tS1(on) Fall Time tS1(off) S2 = Low, Low See Figure 1 0.2 1.7 5 10 30 50 mW mA ms Switch SW2 On Resistance On-Resistance RON I = 500 mA, S2 = High S1 = Low TA = 25_C 44 55 TA = 85_C 55 70 Off Current (+3.3 (+3 3 VIN) IOFF +3.3 VIN = 3.6 V, VCC = 0 V S1 = S2 = Low TA = 25_C 1 TA = 85_C 10 Rise Time tS2(on) Fall Time tS2(off) 0.1 0.9 5 5 20 40 TA = 25_C 140 400 TA = 85_C 200 500 S1 = Low, Low See Figure 1 mW mA ms Switch SW3 On Resistance On-Resistance RON I = 2 mA, mA S1 = S2 = Low W Power Supply +5 VIN Current Input (on) +5 VIN Current Input (off) Input Voltage High I+5VIN(1) S1 = 0 V, S2 = 3 V 20 50 I+5VIN(2) S1 = 3 V, S2 = 0V 20 50 I+5VIN(3) S1 = S2 = 0 V t1 10 VI(H) +5 VIN = 5.5 V 2.2 1.8 +5 VIN = 4.5 V 2.2 1.6 +5 VIN = 5.5 V 1.6 0.8 +5 VIN = 4.5 V 1.4 0.8 Input Voltage Low VI(L) Input Current High II(H) S1 , S2 = 5 V Input Current Low II(L) S1 , S2 = GND 1.0 −1.0 mA m V mA Notes a. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum. b. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. www.vishay.com 2 Document Number: 70010 S-40127—Rev. G, 16-Feb-04 Si9706DY Vishay Siliconix TIMING WAVEFORMS 3V TRUTH TABLE SX S1 S2 Switch 1 Switch 2 Switch 3 0 0 Off Off On 0 1 Off On Off 1 0 On Off Off 1 1 Off Off On GND 90% VCC 90% 10% GND 10% tSX(off) tSX(on) Notes a. The smart switching of the Si9706DY avoids potential host damage by defaulting to off during error conditions. FIGURE 1. Switch Ramp PIN CONFIGURATION AND DESCRIPTION SO-8 GND 1 8 SR VCC 2 7 +5 VIN VCC 3 6 +3.3 VIN S2 4 5 S1 Top View ORDERING INFORMATION Part Number Pin Function 1 GND Ground connection. 2, 3 VCC Supply voltage to slot. 4 S2 Control input for selecting +3.3 VIN to VCC. 5 S1 Control input for selecting +5 VIN to VCC. 6 +3.3 VIN 7 +5 VIN 8 SR Description +3.3-V supply. +5-V supply. Slew rate control pin. Temperature Range Si9706DY-T1 −40 40 to 85_C Si9706DY-T1—E3 (Lead Free) TYPICAL CHARACTERISTICS (25_C UNLESS OTHERWISE NOTED) On-Resistance vs. Load Current On-Resistance vs. Junction Temperature 0.10 0.10 0.08 R ON − On-Resistance ( W ) R ON − On-Resistance ( W ) ID = 1 A TJ = TA Switch 1 0.06 Switch 2 0.04 0.02 0.00 0.5 1.0 1.5 2.0 2.5 3.0 ID − Load Current (A) Document Number: 70010 S-40127—Rev. G, 16-Feb-04 3.5 4.0 0.08 Switch 1 0.06 Switch 2 0.04 0.02 0.00 −40 −20 0 20 40 60 80 100 120 TJ − Junction Temperature (_C) www.vishay.com 3 Si9706DY Vishay Siliconix TYPICAL CHARACTERISTICS (25_C UNLESS OTHERWISE NOTED) Rise Time vs. SR Capacitor Value Fall Time vs. SR Capacitor Value Cload = 0 pF 100 Switch 1 t SX(off) − Fall Time (ms) t SX(on) − Rise Time (ms) Cload = 0 pF 1 Switch 2 0.1 0.01 Switch 1 10 Switch 2 1 Open 0.1 0.001 0.1 1 10 100 0.1 1000 Rise Time vs. Load Capacitance CSR = 33 nF 100 1000 CSR = 33 nF 80 Switch 1 2.0 t SX(off) − Fall Time (ms) t SX(on) − Rise Time (ms) 10 Fall Time vs. Load Capacitance 100 2.5 1.5 Switch 2 1.0 0.5 0.0 60 Switch 1 40 Switch 2 20 0 0 40 80 120 160 0 Cload − Load Capacitance (mF) 1 40 80 120 160 Cload − Load Capacitance (mF) Rise Time Delay, trd vs. CSR 10000 Switch 2 Fall Time Delay, tfd vs. CSR 1000 Rise Time (ms) Rise Time (ms) 1 CSR − Capacitor Value (nF) CSR − Capacitor Value (nF) 3.0 Open Switch 1 0.1 Switch 2 Switch 1 100 10 0.01 0.01 1 0.1 CSR − Capacitor Value (mF) www.vishay.com 4 1 0.01 0.1 1 CSR − Capacitor Value (mF) Document Number: 70010 S-40127—Rev. G, 16-Feb-04 Package Information Vishay Siliconix SOIC (NARROW): 8-LEAD JEDEC Part Number: MS-012 8 6 7 5 E 1 3 2 H 4 S h x 45 D C 0.25 mm (Gage Plane) A e B All Leads q A1 L 0.004" MILLIMETERS INCHES DIM Min Max Min Max A 1.35 1.75 0.053 0.069 A1 0.10 0.20 0.004 0.008 B 0.35 0.51 0.014 0.020 C 0.19 0.25 0.0075 0.010 D 4.80 5.00 0.189 0.196 E 3.80 4.00 0.150 e 0.101 mm 1.27 BSC 0.157 0.050 BSC H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.50 0.93 0.020 0.037 q 0° 8° 0° 8° S 0.44 0.64 0.018 0.026 ECN: C-06527-Rev. I, 11-Sep-06 DWG: 5498 Document Number: 71192 11-Sep-06 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000