SiJ482DP
www.vishay.com
Vishay Siliconix
N-Channel 80 V (D-S) MOSFET
FEATURES
PowerPAK® SO-8L Single
• TrenchFET® power MOSFET
• 100 % Rg and UIS tested
• Capable of operating with 5 V gate drive
D
6.
15
m
m
m
1
13
m
4
G
5.
Top View
3
S
2
S
1
S
APPLICATIONS
Bottom View
D
• DC/DC primary side switch
• Synchronous rectification
PRODUCT SUMMARY
VDS (V)
RDS(on) max. () at VGS = 10 V
RDS(on) max. () at VGS = 7.5 V
RDS(on) max. () at VGS = 4.5 V
Qg typ. (nC)
ID (A) a, g
Configuration
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
80
0.0062
0.0065
0.0095
24
60
Single
• High current switching
G
S
N-Channel MOSFET
ORDERING INFORMATION
Package
Lead (Pb)-free and halogen-free
PowerPAK SO-8L
SiJ482DP-T1-GE3
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
Drain-source voltage
Gate-source voltage
Continuous drain current (TJ = 150 °C)
SYMBOL
VDS
VGS
TC = 25 °C
TC = 70 °C
TA = 25 °C
TA = 70 °C
Pulsed drain current (t = 300 μs)
ID
IDM
Continuous source-drain diode current
TC = 25 °C
TA = 25 °C
IS
Single pulse avalanche current
Single pulse avalanche energy
L = 0.1 mH
IAS
EAS
Maximum power dissipation
TC = 25 °C
TC = 70 °C
TA = 25 °C
TA = 70 °C
PD
Operating junction and storage temperature range
Soldering recommendations (peak temperature) d, e
TJ, Tstg
LIMIT
80
± 20
60 g
60 g
21.1 b, c
16.9 b, c
100
60 g
4.5 b, c
30
45
69.4
44.4
5 b, c
3.2 b, c
-55 to +150
260
UNIT
V
A
mJ
W
°C
THERMAL RESISTANCE RATINGS
PARAMETER
SYMBOL
TYPICAL
MAXIMUM
UNIT
t 10 s
RthJA
20
25
Maximum junction-to-ambient b, f
°C/W
Maximum junction-to-case (drain)
Steady state
RthJC
1.3
1.8
Notes
a. Based on TC = 25 °C
b. Surface mounted on 1" x 1" FR4 board
c. t = 10 s
d. See solder profile (www.vishay.com/doc?73257). The PowerPAK SO-8L is a leadless package. The end of the lead terminal is exposed
copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed
and is not required to ensure adequate bottom side solder interconnection
e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components
f. Maximum under steady state conditions is 65 °C/W
g. Package limited
S12-0544-Rev. A, 12-Mar-12
Document Number: 63728
1
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiJ482DP
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
VDS
VGS = 0 V, ID = 250 μA
80
-
-
-
V
36
-
-
-5.7
-
1.5
-
2.7
V
nA
Static
Drain-source breakdown voltage
VDS temperature coefficient
VDS/TJ
ID = 250 μA
VGS(th) temperature coefficient
VGS(th)/TJ
Gate-source threshold voltage
VGS(th)
VDS = VGS, ID = 250 μA
IGSS
VDS = 0 V, VGS = ± 20 V
-
-
± 100
VDS = 80 V, VGS = 0 V
-
-
1
VDS = 80 V, VGS = 0 V, TJ = 55 °C
-
-
10
VDS 5 V, VGS = 10 V
30
-
-
VGS = 10 V, ID = 20 A
-
0.0051
0.0062
VGS = 7.5 V, ID = 15 A
-
0.0054
0.0065
VGS = 4.5 V, ID = 10 A
-
0.0068
0.0095
VDS = 10 V, ID = 20 A
-
68
-
-
2425
-
VDS = 40 V, VGS = 0 V, f = 1 MHz
-
1180
-
-
100
-
Gate-source leakage
Zero gate voltage drain current
IDSS
On-state drain current a
ID(on)
Drain-source on-state resistance a
Forward transconductance a
RDS(on)
gfs
mV/°C
μA
A
S
Dynamic b
Input capacitance
Ciss
Output capacitance
Coss
Reverse transfer capacitance
Crss
VDS = 40 V, VGS = 10 V, ID = 10 A
-
47
71
Total gate charge
Qg
VDS = 40 V, VGS = 7.5 V, ID = 10 A
-
36.5
55
-
24
36
Gate-source charge
Qgs
VDS = 40 V, VGS = 4.5 V, ID = 10 A
-
6.6
-
Gate-drain charge
Qgd
-
10.2
-
Output charge
Qoss
VDS = 40 V, VGS = 0 V
-
69
105
Rg
f = 1 MHz
0.4
1.1
2.2
-
14
28
-
11
22
-
36
72
tf
-
9
18
td(on)
-
16
32
-
13
26
-
35
70
11
22
Gate resistance
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Turn-on delay time
Rise time
Turn-off delay time
Fall time
td(on)
tr
td(off)
tr
td(off)
VDD = 40 V, RL = 4
ID 10 A, VGEN = 10 V, Rg = 1
VDD = 40 V, RL = 4
ID 10 A, VGEN = 7.5 V, Rg = 1
tf
pF
nC
ns
Drain-Source Body Diode Characteristics
Continuous source-drain diode current
IS
Pulse diode forward current a
ISM
Body diode voltage
VSD
Body diode reverse recovery time
trr
Body diode reverse recovery charge
Qrr
Reverse recovery fall time
ta
Reverse recovery rise time
tb
TC = 25 °C
IS = 4 A
IF = 10 A, di/dt = 100 A/μs,
TJ = 25 °C
-
-
60
-
-
100
-
0.73
1.1
V
-
46
90
ns
-
44
86
nC
-
21
-
-
25
-
A
ns
Notes
a. Pulse test; pulse width 300 μs, duty cycle 2 %
b. Guaranteed by design, not subject to production testing
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S12-0544-Rev. A, 12-Mar-12
Document Number: 63728
2
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiJ482DP
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10
100
VGS = 10 V thru 5 V
VGS = 4 V
8
ID - Drain Current (A)
ID - Drain Current (A)
80
60
40
6
TC = 25 °C
4
2
20
TC = 125 °C
TC = - 55 °C
VGS = 3 V
0
0
0.5
1.0
1.5
2.0
0
2.5
1
2
3
4
VDS - Drain-to-Source Voltage (V)
VGS - Gate-to-Source Voltage (V)
Output Characteristics
Transfer Characteristics
0.009
4000
0.008
3200
C - Capacitance (pF)
RDS(on) - On-Resistance (Ω)
0.0
VGS = 4.5 V
0.007
0.006
VGS = 7.5 V
Ciss
2400
1600
VGS = 10 V
0.005
5
Coss
800
Crss
0
0.004
0
20
40
60
80
0
100
16
ID - Drain Current (A)
32
64
80
Capacitance
On-Resistance vs. Drain Current and Gate Voltage
10
2.1
RDS(on) - On-Resistance (Normalized)
ID = 10 A
VGS - Gate-to-Source Voltage (V)
48
VDS - Drain-to-Source Voltage (V)
8
VDS = 40 V
6
VDS = 30 V
VDS = 50 V
4
2
0
0
10
20
30
40
Qg - Total Gate Charge (nC)
Gate Charge
S12-0544-Rev. A, 12-Mar-12
50
ID = 20 A
1.8
VGS = 10 V
1.5
VGS = 4.5 V
1.2
0.9
0.6
- 50
- 25
0
25
50
75
100
125
150
TJ - Junction Temperature (°C)
On-Resistance vs. Junction Temperature
Document Number: 63728
3
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiJ482DP
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
0.05
100
ID = 20 A
0.04
TJ = 150 °C
RDS(on) - On-Resistance (Ω)
IS - Source Current (A)
10
TJ = 25 °C
1
0.1
0.03
0.02
TJ = 125 °C
0.01
0.01
0.001
0.00
TJ = 25 °C
0.0
0.2
0.4
0.6
0.8
1.0
VSD - Source-to-Drain Voltage (V)
0
1.2
4
6
8
10
VGS - Gate-to-Source Voltage (V)
Source-Drain Diode Forward Voltage
On-Resistance vs. Gate-to-Source Voltage
0.5
200
0.2
160
- 0.1
Power (W)
VGS(th) Variance (V)
2
ID = 5 mA
- 0.4
120
80
ID = 250 μA
- 0.7
- 1.0
- 50
40
- 25
0
25
50
75
100
125
150
0
0.001
0.01
TJ - Temperature (°C)
Threshold Voltage
0.1
Time (s)
1
10
Single Pulse Power, Junction-to-Ambient
100
ID - Drain Current (A)
IDM Limited
100 μs
1 ms
10 I Limited
D
10 ms
1
Limited by RDS(on)*
100 ms
1s
0.1
10 s
TA = 25 °C
Single Pulse
0.01
0.01
BVDSS Limited
DC
0.1
1
10
100
VDS - Drain-to-Source Voltage (V)
* VGS > minimum VGS at which RDS(on) is specified
Safe Operating Area, Junction-to-Ambient
S12-0544-Rev. A, 12-Mar-12
Document Number: 63728
4
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiJ482DP
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
90
ID - Drain Current (A)
72
Package Limited
54
36
18
0
0
25
50
75
100
TC - Case Temperature (°C)
125
150
0
25
85
2.5
68
2.0
51
1.5
Power (W)
Power (W)
Current Derating a
34
1.0
0.5
17
0.0
0
0
25
50
75
100
125
150
50
75
100
125
TC - Case Temperature (°C)
TA - Ambient Temperature (°C)
Power, Junction-to-Case
Power, Junction-to-Ambient
150
Note
a. The power dissipation PD is based on TJ max. = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper
dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the
package limit
S12-0544-Rev. A, 12-Mar-12
Document Number: 63728
5
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SiJ482DP
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
1
Normalized Effective Transient
Thermal Impedance
Duty Cycle = 0.5
0.2
Notes:
0.1
0.1
PDM
0.05
t1
t2
1. Duty Cycle, D =
0.02
2. Per Unit Base = RthJA = 65 °C/W
3. TJM - TA = PDMZthJA (t)
Single Pulse
0.01
0.0001
t1
t2
0.001
4. Surface Mounted
0.01
0.1
1
10
100
1000
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
1
Normalized Effective Transient
Thermal Impedance
Duty Cycle = 0.5
0.2
0.1
0.05
0.1
0.02
Single Pulse
0.01
0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Case
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?63728.
S12-0544-Rev. A, 12-Mar-12
Document Number: 63728
6
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
PowerPAK® SO-8L Case Outline 1
W
E1
E
E2
W2
W3
W1
b2
D2
b
b1
L
L1
L1
A1
e
θ
D1
D
b3
b4
0.25 gauge line
Topside view
Backside view (single)
E2
W2
C
A
W3
W1
F
K
D3
D3
D2
b3
b4
Backside view (dual)
Revision: 05-Aug-2019
Document Number: 69003
1
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
DIM.
Vishay Siliconix
MILLIMETERS
MIN.
NOM.
INCHES
MAX.
MIN.
NOM.
MAX.
A
1.00
1.07
1.14
0.039
0.042
0.045
A1
0.00
-
0.127
0.00
-
0.005
b
0.33
0.41
0.48
0.013
0.016
0.019
b1
0.44
0.51
0.58
0.017
0.020
0.023
b2
4.80
4.90
5.00
0.189
0.193
0.197
b3
0.094
0.004
b4
0.47
0.019
c
0.20
0.25
0.30
0.008
0.010
0.012
D
5.00
5.13
5.25
0.197
0.202
0.207
D1
4.80
4.90
5.00
0.189
0.193
0.197
D2
3.86
3.96
4.06
0.152
0.156
0.160
D3
1.63
1.73
1.83
0.064
0.068
0.072
e
1.27 BSC
0.050 BSC
E
6.05
6.15
6.25
0.238
0.242
0.246
E1
4.27
4.37
4.47
0.168
0.172
0.176
E2
3.18
3.28
3.38
0.125
0.129
0.133
F
-
-
0.15
-
-
0.006
L
0.62
0.72
0.82
0.024
0.028
0.032
L1
0.92
1.07
1.22
0.036
0.042
0.048
K
0.51
0.020
W
0.23
0.009
W1
0.41
0.016
W2
2.82
0.111
W3
2.96
0.117
0°
-
10°
0°
-
10°
ECN: S19-0643-Rev. E, 05-Aug-2019
DWG: 5976
Note
• Millimeters will gover
Revision: 05-Aug-2019
Document Number: 69003
2
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAD Pattern
www.vishay.com
Vishay Siliconix
RECOMMENDED MINIMUM PAD FOR PowerPAK® SO-8L SINGLE
5.000
(0.197)
0.510
(0.020)
2.310
(0.091)
4.061
(0.160)
0.595
(0.023)
6.250
(0.246)
8.250
(0.325)
3.630
(0.143)
0.610
(0.024)
0.410
(0.016)
2.715
(0.107)
0.860
(0.034)
1.291
(0.051)
0.710
(0.028)
0.820
(0.032)
1.905
(0.075)
1.270
(0.050)
7.250
(0.285)
Recommended Minimum Pads
Dimensions in mm (inches)
Revision: 07-Feb-12
1
Document Number: 63818
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
