SIJA54DP-T1-GE3

SiJA54DP www.vishay.com Vishay Siliconix N-Channel 40 V (D-S) MOSFET FEATURES PRODUCT SUMMARY VDS (V) 40 RDS(on) () Max. ID (A) a, g 0.00235 at VGS = 10 V 60 0.00320 at VGS = 4.5 V 60 Qg (Typ.) 32 nC • TrenchFET® Gen IV power MOSFET • Tuned for the lowest RDS-Qoss FOM • 100 % Rg and UIS tested • Qgd / Qgs ratio < 1 optimizes switching characteristics PowerPAK® SO-8L Single • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 D APPLICATIONS 6. 15 m m m 1 13 m 4 G 5. Top View 3 S 2 S 1 S D • Synchronous rectification • ORing • High power density DC/DC G • VRMs and embedded DC/DC Bottom View • DC/AC inverters Ordering Information: SiJA54DP-T1-GE3 (lead (Pb)-free and halogen-free) N-Channel MOSFET • Load switch S ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Symbol Limit Drain-Source Voltage VDS 40 Gate-Source Voltage VGS +20, -16 Continuous Drain Current (TJ = 150 °C) TC = 25 °C 60 g TC = 70 °C 60 g TA = 25 °C ID Continuous Source-Drain Diode Current 25.7 b, c Single Pulse Avalanche Current Single Pulse Avalanche Energy IDM TC = 25 °C TA = 25 °C L = 0.1 mH TC = 70 °C TA = 25 °C 33.3 IS 4 b, c IAS 30 EAS 45 mJ 36.7 23.5 PD W 4.4 b, c 2.8 b, c TA = 70 °C Operating Junction and Storage Temperature Range A 150 TC = 25 °C Maximum Power Dissipation V 32.2 b, c TA = 70 °C Pulsed Drain Current (t = 100 μs) Unit TJ, Tstg -55 to +150 Soldering Recommendations (Peak Temperature) d, e °C 260 THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient b, f Maximum Junction-to-Case (Drain) Symbol Typical Maximum t  10 s RthJA 24 28 Steady State RthJC 2.5 3.4 Unit °C/W Notes a. TC = 25 °C. b. Surface mounted on 1" x 1" FR4 board. c. t = 10 s. d. See solder profile (www.vishay.com/doc?73257). The PowerPAK SO-8L is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components. f. Maximum under steady state conditions is 70 °C/W. g. Package limited. S16-0748-Rev. A, 25-Apr-16 Document Number: 67424 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiJA54DP www.vishay.com Vishay Siliconix SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) Parameter Symbol Test Conditions Min. Typ. Max. Unit VDS VGS = 0 V, ID = 250 μA 40 - - - V 24 - - -5.2 - Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VDS/TJ VGS(th) Temperature Coefficient VGS(th)/TJ Gate-Source Threshold Voltage ID = 250 μA mV/°C VGS(th) VDS = VGS, ID = 250 μA 1.1 - 2.4 V Gate-Source Leakage IGSS VDS = 0 V, VGS = +20 V, -16 V - - ± 100 nA Zero Gate Voltage Drain Current IDSS On-State Drain Current a ID(on) Drain-Source On-State Resistance a Forward Transconductance a RDS(on) gfs VDS = 40 V, VGS = 0 V - - 1 VDS = 40 V, VGS = 0 V, TJ = 55 °C - - 10 VDS  5 V, VGS = 10 V 30 - - VGS = 10 V, ID = 15 A - 0.00195 0.00235 VGS = 4.5 V, ID = 10 A - 0.00265 0.00320 VDS = 10 V, ID = 15 A - 106 - 5300 - VDS = 20 V, VGS = 0 V, f = 1 MHz - 707 - - 105 - - 69 104 - 32 48 - 13.5 - - 6.9 - - μA A  S Dynamic b Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Output Charge Qoss VDS = 20 V, VGS = 0 V - 30.5 46 Rg f = 1 MHz 0.4 1.1 2.0 - 8 16 - 8 16 - 28 56 Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time VDS = 20 V,VGS = 10 V, ID = 10 A VDS = 20 V,VGS = 4.5 V, ID = 10 A td(on) tr td(off) VDD = 20 V, RL = 2  ID  10 A, VGEN = 10 V, Rg = 1  tf - 7 14 td(on) - 24 48 - 69 138 - 23 46 - 10 20 tr td(off) VDD = 20 V, RL = 2  ID  10 A, VGEN = 4.5 V, Rg = 1  tf pF nC  ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulse Diode Forward Current (t = 100 μs) ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Reverse Recovery Fall Time ta Reverse Recovery Rise Time tb TC = 25 °C IS = 5 A IF = 10 A, dI/dt = 100 A/μs, TJ = 25 °C - - 33.3 - - 150 - 0.72 1.1 V - 44 88 ns - 58 116 nC - 29 - - 15 - A ns Notes a. Pulse test; pulse width  300 μs, duty cycle  2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-0748-Rev. A, 25-Apr-16 Document Number: 67424 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiJA54DP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 150 10000 10000 180 VGS = 10 V thru 4 V 150 100 VGS = 3 V 30 1000 120 1st line 2nd line 60 2nd line ID - Drain Current (A) 1000 90 1st line 2nd line 2nd line ID - Drain Current (A) 120 90 TC = 25 °C 60 100 30 TC = -55 °C TC = 125 °C VGS = 2 V 0 0 10 0 0.5 1 1.5 2 2.5 10 0 1 2 3 4 VDS - Drain-to-Source Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Output Characteristics Transfer Characteristics Axis Title Axis Title 0.004 7000 2nd line RDS(on) - On-Resistance (Ω) 10000 10000 Ciss 5600 1000 1st line 2nd line 0.0022 100 VGS = 10 V 1000 4200 1st line 2nd line VGS = 4.5 V 0.0028 2nd line C - Capacitance (pF) 0.0034 0.0016 5 2800 100 Coss 1400 Crss 0.001 0 10 20 40 60 80 10 0 100 8 16 VDS - Drain-to-Source Voltage (V) 2nd line On-Resistance vs. Drain Current Capacitance 2.0 ID = 10 A 8 VDS = 30 V 1000 1st line 2nd line VDS = 20 V VDS = 10 V 4 100 2 0 10 14 28 42 56 70 2nd line RDS(on) - On-Resistance (Normalized) 10000 6 40 Axis Title Axis Title 2nd line VGS - Gate-to-Source Voltage (V) 32 ID - Drain Current (A) 2nd line 10 0 24 10000 ID = 15 A 1.7 VGS = 10 V 1000 1.4 VGS = 4.5 V 1.1 100 0.8 0.5 10 -50 -25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) 2nd line TJ - Junction Temperature (°C) 2nd line Gate Charge On-Resistance vs. Junction Temperature S16-0748-Rev. A, 25-Apr-16 1st line 2nd line 0 Document Number: 67424 3 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiJA54DP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 100 0.01 10000 10000 1000 1 TJ = 25 °C 0.1 100 0.01 0.001 0.008 1000 0.006 TJ = 125 °C 0.004 100 0.2 0.4 0.6 0.8 1.0 TJ = 25 °C 0.002 0 10 0 1.2 10 0 2 4 6 8 10 VSD - Source-to-Drain Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage Axis Title Axis Title 0.5 200 10000 0.2 10000 160 1000 2nd line Power (W) 1000 ID = 5 mA -0.4 120 1st line 2nd line -0.1 1st line 2nd line 2nd line VGS(th) - Variance (V) 1st line 2nd line TJ = 150 °C 1st line 2nd line 2nd line IS - Source Current (A) 2nd line RDS(on) - On-Resistance (Ω) ID = 15 A 10 80 100 ID = 250 μA 100 -0.7 40 -1.0 0 0.001 10 -50 -25 0 25 50 75 100 125 150 10 0.01 0.1 1 10 TJ - Temperature (°C) 2nd line Time (s) 2nd line Threshold Voltage Single Pulse Power, Junction-to-Ambient Axis Title 1000 10000 IDM limited 100 μs ID limited 1000 10 1 ms Limited by RDS(on) (1) 1 10 ms 100 100 ms 1s 10 s 0.1 Ta = 25 °C Single pulse 0.01 0.01 (1) 0.1 1st line 2nd line 2nd line ID - Drain Current (A) 100 BVDSS limited 1 10 DC 10 100 VDS - Drain-to-Source Voltage (V) VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient S16-0748-Rev. A, 25-Apr-16 Document Number: 67424 4 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiJA54DP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title 10000 120 1000 80 1st line 2nd line 2nd line ID - Drain Current (A) 100 60 Package Limited 40 100 20 0 10 0 25 50 75 100 125 150 TC - Case Temperature (°C) 2nd line Current Derating a Axis Title Axis Title 50 10000 2.5 40 10000 2.0 1.5 1st line 2nd line 20 2nd line Power (W) 1000 1st line 2nd line 2nd line Power (W) 1000 30 1.0 100 10 100 0.5 0 10 0 25 50 75 100 125 150 0 10 0 25 50 75 100 125 TC - Case Temperature (°C) 2nd line TA - Ambient Temperature (°C) 2nd line Power, Junction-to-Case Power, Junction-to-Ambient 150 Note a. The power dissipation PD is based on TJ (max.) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. S16-0748-Rev. A, 25-Apr-16 Document Number: 67424 5 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiJA54DP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title 10000 Duty Cycle = 0.5 Notes: 0.2 1000 1st line 2nd line Normalized Effective Transient Thermal Impedance 1 PDM 0.1 0.1 t1 t2 t 1. Duty cycle, D = t1 2 2. Per unit base = RthJA = 70 °C/W 0.05 0.02 3. TJM - TA = PDMZthJA Single pulse 100 (t) 4. Surface mounted 0.01 0.0001 0.001 0.01 0.1 1 10 100 10 1000 Square Wave Pulse Duration (s) 2nd line Normalized Thermal Transient Impedance, Junction-to-Ambient Axis Title 10000 Duty Cycle = 0.5 0.2 1000 0.1 1st line 2nd line Normalized Effective Transient Thermal Impedance 1 0.05 0.1 0.02 Single pulse 0.01 0.0001 100 10 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) 2nd line Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67424. S16-0748-Rev. A, 25-Apr-16 Document Number: 67424 6 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix PowerPAK® SO-8L Case Outline 1 W E1 E E2 W2 W3 W1 b2 D2 b b1 L L1 L1 A1 e θ D1 D b3 b4 0.25 gauge line Topside view Backside view (single) E2 W2 C A W3 W1 F K D3 D3 D2 b3 b4 Backside view (dual) Revision: 05-Aug-2019 Document Number: 69003 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com DIM. Vishay Siliconix MILLIMETERS MIN. NOM. INCHES MAX. MIN. NOM. MAX. A 1.00 1.07 1.14 0.039 0.042 0.045 A1 0.00 - 0.127 0.00 - 0.005 b 0.33 0.41 0.48 0.013 0.016 0.019 b1 0.44 0.51 0.58 0.017 0.020 0.023 b2 4.80 4.90 5.00 0.189 0.193 0.197 b3 0.094 0.004 b4 0.47 0.019 c 0.20 0.25 0.30 0.008 0.010 0.012 D 5.00 5.13 5.25 0.197 0.202 0.207 D1 4.80 4.90 5.00 0.189 0.193 0.197 D2 3.86 3.96 4.06 0.152 0.156 0.160 D3 1.63 1.73 1.83 0.064 0.068 0.072 e 1.27 BSC 0.050 BSC E 6.05 6.15 6.25 0.238 0.242 0.246 E1 4.27 4.37 4.47 0.168 0.172 0.176 E2 3.18 3.28 3.38 0.125 0.129 0.133 F - - 0.15 - - 0.006 L 0.62 0.72 0.82 0.024 0.028 0.032 L1 0.92 1.07 1.22 0.036 0.042 0.048 K 0.51 0.020 W 0.23 0.009 W1 0.41 0.016 W2 2.82 0.111 W3 2.96 0.117  0° - 10° 0° - 10° ECN: S19-0643-Rev. E, 05-Aug-2019 DWG: 5976 Note • Millimeters will gover Revision: 05-Aug-2019 Document Number: 69003 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PAD Pattern www.vishay.com Vishay Siliconix RECOMMENDED MINIMUM PAD FOR PowerPAK® SO-8L SINGLE 5.000 (0.197) 0.510 (0.020) 2.310 (0.091) 4.061 (0.160) 0.595 (0.023) 6.250 (0.246) 8.250 (0.325) 3.630 (0.143) 0.610 (0.024) 0.410 (0.016) 2.715 (0.107) 0.860 (0.034) 1.291 (0.051) 0.710 (0.028) 0.820 (0.032) 1.905 (0.075) 1.270 (0.050) 7.250 (0.285) Recommended Minimum Pads Dimensions in mm (inches) Revision: 07-Feb-12 1 Document Number: 63818 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000