SIRA54ADP-T1-RE3

SiRA54ADP www.vishay.com Vishay Siliconix N-Channel 40 V (D-S) MOSFET FEATURES PowerPAK® SO-8 Single D 5 D 6 D 7 • TrenchFET® Gen IV power MOSFET D 8 • 40 V drain-source break-down voltage • Tuned for low Qg and Qoss • 100 % Rg and UIS tested 6. 15 m m m 1 5m 5.1 Top View 3 4 S G Bottom View 2 S 1 S PRODUCT SUMMARY VDS (V) RDS(on) max. (Ω) at VGS = 10 V RDS(on) max. (Ω) at VGS = 4.5 V Qg typ. (nC) ID (A) a Configuration • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS D • Synchronous rectification • High power density DC/DC • Motor drive control 40 0.0022 0.0032 21.5 128 Single G S N-Channel MOSFET ORDERING INFORMATION Package Lead (Pb)-free and halogen-free PowerPAK SO-8 SIRA54ADP-T1-RE3 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER Drain-source voltage Gate-source voltage Continuous drain current (TJ = 150 °C) SYMBOL VDS VGS TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C Pulsed drain current (t = 100 μs) ID IDM Continuous source-drain diode current TC = 25 °C TA = 25 °C IS Single pulse avalanche current Single pulse avalanche Energy L = 0.1 mH IAS EAS Maximum power dissipation TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C PD Operating junction and storage temperature range Soldering recommendations (peak temperature) d, e TJ, Tstg LIMIT 40 +20, -16 128 103 36.2 b, c 29 b, c 300 59.7 4.7 b, c 25 31.25 65.7 425 5.2 b, c 3.3 b, c -55 to +150 260 UNIT V A mJ W °C THERMAL RESISTANCE RATINGS PARAMETER Maximum junction-to-ambient b, f Maximum junction-to-case (drain) t ≤ 10 s Steady state SYMBOL RthJA RthJC TYPICAL 20 1.5 MAXIMUM 24 1.9 UNIT °C/W Notes a. Based on TC = 25 °C b. Surface mounted on 1" x 1" FR4 board c. t = 10 s d. See solder profile (www.vishay.com/doc?73257). The PowerPAK SO-8 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components f. Maximum under steady state conditions is 62.5 °C/W S22-0217-Rev. A, 28-Feb-2022 Document Number: 62064 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiRA54ADP www.vishay.com Vishay Siliconix SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT V Static Drain-source breakdown voltage VDS VGS = 0 V, ID = 1 mA 40 - - ΔVDS/TJ ID = 1 mA - 25 - VGS(th) temperature coefficient ΔVGS(th)/TJ ID = 250 μA - -5.2 - Gate-source threshold voltage VDS temperature coefficient mV/°C VGS(th) VDS = VGS, ID = 250 μA 1 - 2.5 V Gate-source leakage IGSS VDS = 0 V, VGS = +20, -16 V - - ± 100 nA Zero gate voltage drain current IDSS Drain-source on-state resistance a Forward transconductance a RDS(on) gfs VDS = 40 V, VGS = 0 V - - 1 VDS = 40 V, VGS = 0 V, TJ = 75 °C - - 20 VGS = 10 V, ID = 15 A - 0.0018 0.0022 VGS = 4.5 V, ID = 15 A - 0.0024 0.0032 VDS = 10 V, ID = 15 A - 98 - - 3850 - VDS = 20 V, VGS = 0 V, f = 1 MHz - 655 - - 75 - - 46.7 70 - 21.5 32 - 9.3 - - 4 - μA Ω S Dynamic b Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge Qg VDS = 20 V, VGS = 10 V, ID = 10 A VDS = 20 V, VGS = 4.5 V, ID = 10 A Gate-source charge Qgs Gate-drain charge Qgd Output charge Qoss VDS = 20 V, VGS = 0 V - 24.5 - Gate resistance Rg f = 1 MHz 0.5 1.1 1.8 - 15 30 - 6 12 - 30 60 tf - 6 12 td(on) - 26 52 - 63 126 - 33 66 - 10 20 Turn-on delay time Rise time Turn-off delay time Fall time Turn-on delay time Rise time Turn-off delay time Fall time td(on) tr td(off) tr td(off) VDD = 20 V, RL = 2 Ω ID ≅ 10 A, VGEN = 10 V, Rg = 1 Ω VDD = 20 V, RL = 2 Ω ID ≅ 10 A, VGEN = 4.5 V, Rg = 1 Ω tf pF nC Ω ns Drain-Source Body Diode Characteristics Continuous source-drain diode current IS Pulse diode forward current (tp = 100 μs) ISM Body diode voltage VSD Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Reverse recovery fall time ta Reverse recovery rise time tb TC = 25 °C - - 59.7 - - 300 IS = 5 A - 0.72 1.1 - 29 58 ns IF = 10 A, di/dt = 100 A/μs, TJ = 25 °C - 23 46 nC - 15 - - 14 - A V ns Notes g. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 % h. Guaranteed by design, not subject to production testing Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S22-0217-Rev. A, 28-Feb-2022 Document Number: 62064 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiRA54ADP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 10000 180 10000 200 VGS = 10 V thru 4 V 1000 VGS = 3 V 90 100 60 1000 120 1st line 2nd line 120 2nd line ID - Drain Current (A) 160 1st line 2nd line 2nd line ID - Drain Current (A) 150 80 TC = 25 °C 100 40 30 1 2 3 4 10 0 10 0 0 TC = -55 °C TC = 125 °C VGS = 2 V thru 0 V 0 5 1 2 3 4 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics Axis Title 5 Axis Title 10000 0.0030 10000 10 000 1000 0.0022 0.0018 VGS = 10 V 100 2nd line C - Capacitance (pF) VGS = 4.5 V Coss 1000 1000 1st line 2nd line 0.0026 1st line 2nd line Crss 100 100 0.0014 0 20 40 60 80 10 10 10 0.0010 0 100 8 16 VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current Capacitance Axis Title 1000 VDS = 10 V, 20 V, 30 V 4 100 2 10 0 20 30 40 50 2nd line RDS(on) - On-Resistance (Normalized) ID = 10 A 6 10000 1.9 8 10 40 Axis Title 10000 1st line 2nd line 2nd line VGS - Gate-to-Source Voltage (V) 32 ID - Drain Current (A) 10 0 24 VGS = 10 V, 15 A 1.6 1000 1.3 VGS = 4.5 V, 15 A 1.0 100 0.7 10 0.4 -50 -25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) TJ - Junction Temperature (°C) Gate Charge On-Resistance vs. Junction Temperature S22-0217-Rev. A, 28-Feb-2022 1st line 2nd line RDS(on) - On-Resistance ( ) 2nd line Ciss Document Number: 62064 3 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiRA54ADP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title Axis Title 10000 0.010 10000 100 1000 TJ = 25 °C 1 TJ = 150 °C 100 0.1 1000 0.006 1st line 2nd line RDS(on) - On-Resistance ( ) 2nd line 10 1st line 2nd line 2nd line IS - Source Current (A) ID = 15 A 0.008 0.004 TJ = 125 °C 100 0.002 TJ = 25 °C 0.01 10 0 0.2 0.4 0.6 0.8 1.0 10 0 1.2 0 2 4 8 10 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage Axis Title Axis Title 10000 0.5 10000 500 0.2 400 -0.4 100 ID = 250 µA 300 1st line 2nd line ID = 5 mA 1000 2nd line P - Power (W) 1000 -0.1 1st line 2nd line 2nd line VGS(th) - Variance (V) 6 200 100 -0.7 100 10 -1.0 -50 -25 0 25 50 75 0 0.0001 100 125 150 10 0.001 0.01 0.1 1 10 TJ - Junction Temperature (°C) t - Time (s) Threshold Voltage Single Pulse Power, Junction-to-Ambient Axis Title 10000 1000 IDM limited ID limited 1000 100 µs 10 1 ms Limited by RDS(on) a 10 ms 1 1st line 2nd line 2nd line ID - Drain Current (A) 100 100 100 ms 1s 0.1 10 s TA = 25 °C, single pulse 0.01 0.01 BVDSS limited DC 10 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) Safe Operating Area Note a. VGS > minimum VGS at which RDS(on) is specified S22-0217-Rev. A, 28-Feb-2022 Document Number: 62064 4 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiRA54ADP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title 10000 125 1000 75 1st line 2nd line 2nd line ID - Drain Current (A) 100 50 100 25 10 0 0 25 50 75 100 125 150 TC - Case Temperature (°C) Current Derating a Axis Title Axis Title 10000 80 2.0 1st line 2nd line 32 100 16 1000 1.5 1st line 2nd line 1000 48 2nd line P - Power (W) 64 2nd line P - Power (W) 10000 2.5 1.0 100 0.5 10 0 0 25 50 75 100 125 150 10 0 0 25 50 75 100 125 TC - Case Temperature (°C) TA - Ambient Temperature (°C) Power, Junction-to-Case Power, Junction-to-Ambient 150 Note b. The power dissipation PD is based on TJ max. = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit S22-0217-Rev. A, 28-Feb-2022 Document Number: 62064 5 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SiRA54ADP www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Axis Title 10000 Duty cycle = 0.5 Notes 0.2 PDM 0.1 0.1 1000 1st line 2nd line Normalized Effective Transient Thermal Impedance 1 t1 t2 t1 1. Duty cycle, D = t 2 2. Per unit base = RthJA = 62.5 °C/W 0.05 0.02 3. TJM - TA = PDMZthJA Single pulse 100 (t) 4. Surface mounted 0.01 0.0001 0.001 0.01 0.1 1 10 100 10 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient Axis Title 1 10000 0.2 1000 0.1 1st line 2nd line Normalized Effective Transient Thermal Impedance Duty cycle = 0.5 0.05 0.1 0.02 100 Single pulse 0.01 0.0001 10 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?62064. S22-0217-Rev. A, 28-Feb-2022 Document Number: 62064 6 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000