SM-5330R0FE6

SM www.vishay.com Vishay Huntington Wirewound Resistors, Precision Power, Surface Mount FEATURES • All welded construction • Molded encapsulation • Wraparound terminations • Excellent stability at different environmental conditions • High power ratings (up to 4 W) • Available in non-inductive styles (“NI” SPECIAL) with Ayrton-Perry winding (Resistance max. value is one half standard value) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL MODEL POWER RATING P70 °C W RESISTANCE RANGE  TOLERANCE ±% WEIGHT (TYPICAL) g/1000 PIECES SM-1 SM1 0.5 0.1 to 400 0.1, 0.25, 0.5, 1, 5 45 SM-2 SM2 1 0.1 to 3K 0.1, 0.25, 0.5, 1, 5 230 SM-3 SM3 3 0.1 to 25K 0.1, 0.25, 0.5, 1, 5 1360 SM-4 SM4 2 0.1 to 15K 0.1, 0.25, 0.5, 1, 5 680 SM-5 SM5 4 0.1 to 50K 0.1, 0.25, 0.5, 1, 5 2040 GLOBAL MODEL TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient UNIT SM RESISTOR CHARACTERISTICS ppm/°C ± 20 > 10 , ± 50 1  to 10 , contact factory for 0.99  and below Dielectric Withstanding Voltage VAC 1000 Operating Temperature Range °C -55 to +275 Maximum Working Voltage V (P x R)1/2 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: SM-2R4000FE6 (visit www.vishay.net SAP parts manual for all options) S M - 2 R 4 0 0 0 F E 6 GLOBAL MODEL (4 digits) VALUE (5 digits) TOLERANCE (1 digit) PACKAGING CODE (2 digits) SPECIAL (up to 3 digits) SM-1 SM-2 SM-3 SM-4 SM-5 R = Decimal K = Thousand 1R500 = 1.5  4K000 = 4 k B = ± 0.1 % C= ± 0.25 % D = ± 0.5 % F=±1% J = ± 5% E6 = lead (Pb)-free, 7" tape and reel pack E7 = lead (Pb)-free, 13" tape and reel pack (Dash Number) From 1 to 999 as applicable NI = Non-inductive Historical Part Number example: SM2-0.4-1% SM2 0.4  1% HISTORICAL MODEL RESISTANCE VALUE TOLERANCE Revision: 06-Apr-18 Document Number: 31812 1 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SM www.vishay.com Vishay Huntington DIMENSIONS in inches [millimeters] T L c + H GLOBAL  MODEL SM-1 W b a W1 DIMENSIONS in inches [millimeters] SOLDER PAD DIMENSIONS L ± 0.015 [0.381] W ± 0.015 [0.381] H ± 0.015 [0.381] W1 ± 0.015 [0.381] T ± 0.015 [0.381] a ± 0.015 [0.381] b ± 0.015 [0.381] c ± 0.015 [0.381] 0.190 [4.83] 0.130 [3.30] 0.110 [2.79] 0.060 [1.52] 0.040 [1.02] 0.062 [1.57] 0.100 [2.54] 0.250 [6.35] SM-2 0.260 [6.60] 0.155 [3.94] 0.125 [3.18] 0.070 [1.78] 0.070 [1.78] 0.096 [2.44] 0.112 [2.84] 0.337 [8.56] SM-3 0.625 [15.88] 0.270 [6.86] 0.250 [6.35] 0.120 [3.05] 0.135 [3.43] 0.200 [5.08] 0.150 [3.81] 0.700 [17.78] SM-4 0.450 [11.43] 0.250 [6.35] 0.180 [4.57] 0.120 [3.05] 0.100 [2.54] 0.155 [3.94] 0.230 [5.84] 0.540 [13.72] SM-5 0.820 [20.83] 0.295 [7.49] 0.305 [7.75] 0.150 [3.81] 0.190 [4.83] 0.220 [5.59] 0.250 [6.35] 0.900 [22.86] Element: copper-nickel alloy Encapsulation: molded epoxy Core: ceramic Terminal: matte tin Part Marking: HEI, model, value, tolerance, date code Note • Due to resistor size limitations some resistors will have minimal information marked on parts RATED POWER IN % DERATING MATERIAL SPECIFICATIONS 120 100 80 60 40 20 0 - 55 0 50 100 70 150 200 250 300 350 AMBIENT TEMPERATURE IN °C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS ± 0.5 % + 0.05  Thermal Shock -55 °C to +150 °C, 1000 cycles, 15 min at each extreme Short Time Overload 5x rated power for 5 s ± 0.5 % + 0.05  Low Temperature Storage -55 °C for 24 h ± 0.5 % + 0.05  Load Life 1000 h at rated power, +70 °C, 1.5 h “ON”, 0.5 h “OFF” ± 1.0 % + 0.05  Resistance to Solder Heat MIL-STD 202; 260 °C, 10 s ± 0.5 % + 0.05  Moisture Resistance Per MIL-STD 202 ± 1.0 % + 0.05  PACKAGING MODEL SM-1 SM-2 SM-3 SM-4 SM-5 Revision: 06-Apr-18 REEL TAPE WIDTH 12 mm/embossed plastic 16 mm/embossed plastic 24 mm/embossed plastic 24 mm/embossed plastic 32 mm/embossed plastic DIAMETER PIECES/REEL PACKAGE CODE 178 mm/7" 650 E6 330 mm/13" 3000 E7 178 mm/7" 600 E6 330 mm/13" 2000 E7 178 mm/7" 125 E6 330 mm/13" 500 E7 178 mm/7" 250 E6 330 mm/13" 1000 E7 178 mm/7" 180 E6 330 mm/13" 500 E7 Document Number: 31812 2 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000