SM5A27-E3/2D

SM5A27 www.vishay.com Vishay General Semiconductor Surface Mount PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Junction passivation optimized design passivated anisotropic rectifier technology • TJ = 175 °C capability suitable for high reliability and automotive requirement • Low leakage current • Low forward voltage drop • High surge capability DO-218AB • Meets ISO7637-2 surge specification • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VBR 27 V PPPM (10 x 1000 μs) 3600 W PD 5W VWM 22 V IRSM 70 A TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. IFSM 500 A MECHANICAL DATA TJ max. 175 °C Polarity Uni-directional Package DO-218AB Case: DO-218AB Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test per Polarity: Heatsink is anode MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE PPPM 3600 W PD 5.0 W Non-repetitive peak reverse surge current for 10 μs/10 ms exponentially decaying waveform IRSM 70 A Maximum working stand-off voltage VWM 22.0 V Peak forward surge current 8.3 ms single half sine-wave IFSM 500 A TJ, TSTG - 55 to + 175 °C Peak pulse power dissipation with 10/1000 μs waveform Power dissipation on infinite heatsink at TC = 25 °C (fig. 1) Operating junction and storage temperature range Revision: 10-Jul-12 UNIT Document Number: 88381 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SM5A27 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL MIN. TYP. MAX. UNIT Reverse Zener voltage IZ = 10 mA VZ 24.0 - 30.0 V Zener voltage temperature coefficient IZ = 10 mA VZTC - - 36 mV/°C Clamping voltage for 10 μs/10 ms exponentially decaying waveform IPP = 55 A VC - - 40.0 V - - 1.0 - 0.95 - IF = 6.0 A Instantaneous forward voltage VF (1) IF = 100 A Reverse leakage current Rated VWM TJ = 25 °C TJ = 175 °C IR - - 0.2 - - 10.0 V μA Note (1) Measured on a 300 μs square pulse width THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance, junction to case SYMBOL VALUE UNIT RJC 1.0 °C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) SM5A27HE3/2D (1) PREFERRED PACKAGE CODE 2.505 BASE QUANTITY DELIVERY MODE 750 13" diameter plastic tape and reel, anode towards the sprocket hole 2D Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3000 8.0 Load Dump Power (W) Power Dissipation (W) 2500 6.0 4.0 2.0 2000 1500 1000 500 0 0 50 0 100 150 200 25 50 75 100 125 150 175 Case Temperature (°C) Case Temperature (°C) Fig. 1 - Power Derating Curve Fig. 2 - Load Dump Power Characteristics (10 ms Exponential Waveform) Revision: 10-Jul-12 Document Number: 88381 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SM5A27 www.vishay.com tr = 10 μs 100 TJ = 25 °C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50 % of IPPM Peak Value IPPM Instantaneous Reverse Current (μA) Input Peak Pulse Current (%) 150 Vishay General Semiconductor 100 Half Value - IPP IPPM 2 50 td 0 10 TJ = 175 °C 1 0.1 0.01 TJ = 25 °C 0.001 0.0001 10 0 30 20 40 5 20 35 50 65 80 t - Time (ms) Percentage of VBR (%) Fig. 3 - Pulse Waveform Fig. 6 - Typical Reverse Characteristics 95 100 Reverse Surge Power (W) Transient Thermal Impedance (°C/W) 10 000 1000 RθJA 10 RθJC 1 0.1 0.01 100 10 0.01 0.1 1 10 100 Pulse Width (ms) - ½ IPP Exponential Waveform t - Pulse Width (s) Fig. 4 - Reverse Power Capability Fig. 7 - Typical Transient Thermal Impedance Instantaneous Forward Current (A) 100 TJ = 150 °C 10 1.0 TJ = 25 °C 0.1 0.01 0.35 0.45 0.55 0.65 0.75 0.85 0.95 Instantaneous Forward Voltage (V) Fig. 5 - Typical Instantaneous Forward Characteristics Revision: 10-Jul-12 Document Number: 88381 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SM5A27 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-218AB 0.628 (16.0) 0.592 (15.0) 0.539 (13.7) 0.524 (13.3) Mounting Pad Layout 0.150 (3.8) 0.126 (3.2) 0.116 (3.0) 0.093 (2.4) 0.413 (10.5) 0.342 (8.7) 0.374 (9.5) 0.327 (8.3) 0.413 (10.5) 0.374 (9.5) 0.366 (9.3) 0.343 (8.7) 0.406 (10.3) 0.382 (9.7) 0.197 (5.0) 0.185 (4.7) 0.116 (3.0) 0.093 (2.4) 0.366 (9.3) 0.343 (8.7) 0.606 (15.4) 0.583 (14.8) Lead 1 0.138 (3.5) 0.098 (2.5) 0.016 (0.4) MIN. Lead 2/Metal Heatsink Revision: 10-Jul-12 0.091 (2.3) 0.067 (1.7) 0.098 (2.5) 0.059 (1.5) 0.028 (0.7) 0.020 (0.5) Document Number: 88381 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000