SMC5K36A-M3/H

SMC5K10A thru SMC5K85A www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Available in uni-directional polarity only • 5000 W peak pulse power capability with a 10/1000 μs waveform • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMC (DO-214AB) • AEC-Q101 qualified LINKS TO ADDITIONAL RESOURCES 3D 3D - Automotive ordering code: base P/NHM3 for SMC5K10A to SMC5K20A • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS VBR 11.1 V to 104 V VWM 10 V to 85 V PPPM 5000 W TJ max. 150 °C Polarity Uni-directional Package SMC (DO-214AB) TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ... and only available for SMC5K10A to 20A types) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix meets JESD 201 class 2 whisker test Note • SMC5K22A to SMC5K85A for industrial grade only Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL (1) VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) PPPM 5000 W Peak pulse current with a 10/1000 μs waveform (fig 3.) IPPM (1) See next table A TJ, TSTG -55 to +150 °C Operating junction and storage temperature range Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C, per fig. 2 A Revision: 20-Jul-2020 Document Number: 87742 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMC5K10A thru SMC5K85A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) (V) AT IT MIN. MAX. TEST CURRENT IT (mA) SMC5K10A 5GDX 11.1 12.3 1.0 SMC5K12A 5GEE 13.3 14.7 1.0 SMC5K13A 5GEG 14.4 15.9 1.0 SMC5K14A 5GEK 15.6 17.2 1.0 SMC5K15A 5GEM 16.7 18.5 1.0 SMC5K16A 5GEP 17.8 19.7 1.0 SMC5K17A 5GER 18.9 20.9 1.0 SMC5K18A 5GET 20.0 22.1 1.0 SMC5K20A 5GEV 22.2 24.5 1.0 SMC5K22A 5GEX 24.4 26.9 1.0 SMC5K24A 5GEZ 26.7 29.5 1.0 SMC5K26A 5GFE 28.9 31.9 1.0 SMC5K28A 5GFG 31.1 34.4 1.0 SMC5K30A 5GFK 33.3 36.8 1.0 SMC5K33A 5GFM 36.7 40.6 1.0 SMC5K36A 5GFP 40.0 44.2 1.0 SMC5K40A 5GFR 44.4 49.1 1.0 SMC5K43A 5GFT 47.8 52.8 1.0 SMC5K45A 5GFV 50.0 55.3 1.0 SMC5K48A 5GFX 53.3 58.9 1.0 SMC5K51A 5GFZ 56.7 62.7 1.0 SMC5K54A 5GGE 60.0 66.3 1.0 SMC5K58A 5GGG 64.4 71.2 1.0 SMC5K60A 5GGK 66.7 73.7 1.0 SMC5K64A 5GGM 71.1 78.6 1.0 SMC5K70A 5GGP 77.8 86.0 1.0 SMC5K75A 5GGR 83.3 92.1 1.0 SMC5K78A 5GGT 86.7 95.8 1.0 SMC5K85A 5GGV 94.4 104 1.0 Notes (1) Pulse test: t ≤ 50 ms p (2) Surge current waveform per fig. 3 and derated per fig.2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) MAX. PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 10 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 10.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 294 251 233 216 205 192 181 171 154 141 129 119 110 103 93.8 86.1 77.5 72.0 68.8 64.6 60.7 57.4 53.4 51.7 48.5 44.2 41.3 39.7 36.5 17.0 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS (TA = 25 °C unless otherwise noted) STANDARD IEC 61000-4-2 TEST TYPE Human body model (contact mode) Human body model (air discharge mode) TEST CONDITIONS SYMBOL CLASS C = 150 pF, R = 330 Ω ESD 4 VALUE > 8 kV > 15 kV ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMC5K10A-M3/H (1) 0.257 H 850 7" diameter plastic tape and reel SMC5K10A-M3/I (1) 0.257 I 3500 13" diameter plastic tape and reel SMC5K10AHM3_A/H (2) 0.257 H 850 7" diameter plastic tape and reel SMC5K10AHM3_A/I (2) 0.257 I 3500 13" diameter plastic tape and reel Notes (1) Available for SMC5K10A to SMC5K85A (2) AEC-Q101 qualified, available for SMC5K10A to SMC5K20A only Revision: 20-Jul-2020 Document Number: 87742 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMC5K10A thru SMC5K85A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 10 1 tr = 10 μs 100 Peak value IPPM Half value - IPP/2 50 10/1000 μs waveform as td 0 0.1 10 100 1000 0 10 000 1.0 2.0 3.0 4.0 tp - Time (ms) td - Pulse Width (μs) Fig. 1 - Peak Pulse Power Derating Curve Fig. 3 - Pulse Waveform 100 000 100 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % TJ = 25 °C pulse width (td) is as the point where the peak current decays to 50 % of IPPM 75 TJ = 25 °C f = 1.0 MHz Measured at zero bias 10 000 50 25 0 1000 Measured at stand-off voltage, VWM 100 0 25 50 75 100 125 150 TJ - Initial Temperature (°C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature 10 100 VWM - Reverse Stand-Off Voltage (V) Fig. 4 - Typical Junction Capacitance Notes • Fig.1 - Power calculations is based on IPPM times defined maximum clamping voltage by pulse width • Fig.1 - 10 000 μs PPPM is actual test for VWM ≤ 60 V types, over 60 V types 10 000 μs PPPM is curve extensional value Revision: 20-Jul-2020 Document Number: 87742 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMC5K10A thru SMC5K85A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMC (DO-214AB) Mounting Pad Layout 0.185 (4.69) MAX. 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.060 (1.52) MIN. 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 20-Jul-2020 Document Number: 87742 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000