SMC5K10A thru SMC5K85A
www.vishay.com
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
• Unidirectional
• Peak pulse power:
- 5000 W (10/1000 μs)
- 40 kW (8/20 μs)
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
SMC (DO-214AB)
Cathode
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
Anode
LINKS TO ADDITIONAL RESOURCES
3D 3D
• AEC-Q101 qualified
- Automotive ordering code: base P/NHM3
for SMC5K10A to SMC5K20A
• UL recognition for safety 497B with file number E136766
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3D Models
MECHANICAL DATA
PRIMARY CHARACTERISTICS
VBR
11.1 V to 104 V
VWM
10 V to 85 V
PPPM
5000 W
TJ max.
150 °C
Polarity
Unidirectional
Package
SMC (DO-214AB)
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
Case: SMC (DO-214AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, ... and only available
for SMC5K10A to 20A types)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Note
• SMC5K22A to SMC5K85A for industrial grade only
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1)
PPPM (1)
5000
W
Peak pulse current with a 10/1000 μs waveform (fig 3.)
IPPM (1)
See next table
A
TJ, TSTG
-55 to +150
°C
Operating junction and storage temperature range
Note
(1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C, per fig. 2
A
Revision: 13-Sep-2022
Document Number: 87742
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMC5K10A thru SMC5K85A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE
TYPE
DEVICE
MARKING
CODE
SMC5K10A
5GDX
BREAKDOWN
VOLTAGE VBR
AT IT (1)
(V)
MIN.
MAX.
11.1
12.3
TEST
CURRENT
IT
(mA)
STAND-OFF
VOLTAGE
VWM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT VWMID
(μA)
1.0
10
10.0
MAXIMUM
CLAMPING
VOLTAGE VC
AT IPPM
10/1000 μs
MAXIMUM
CLAMPING
VOLTAGE VC
AT IPPM
8/20 μs
(V)
(A)
(V)
(A)
17.0
294
24.1
1660
SMC5K12A
5GEE
13.3
14.7
1.0
12
5.0
19.9
251
25.3
1581
SMC5K13A
5GEG
14.4
15.9
1.0
13
2.0
21.5
233
27.2
1471
SMC5K14A
5GEK
15.6
17.2
1.0
14
2.0
23.2
216
30.0
1333
SMC5K15A
5GEM
16.7
18.5
1.0
15
2.0
24.4
205
32.5
1231
SMC5K16A
5GEP
17.8
19.7
1.0
16
2.0
26.0
192
34.4
1163
SMC5K17A
5GER
18.9
20.9
1.0
17
2.0
27.6
181
37.0
1081
SMC5K18A
5GET
20.0
22.1
1.0
18
2.0
29.2
171
39.3
1018
SMC5K20A
5GEV
22.2
24.5
1.0
20
2.0
32.4
154
42.8
935
SMC5K22A
5GEX
24.4
26.9
1.0
22
1.0
35.5
141
48.2
830
SMC5K24A
5GEZ
26.7
29.5
1.0
24
1.0
38.9
129
51.6
775
SMC5K26A
5GFE
28.9
31.9
1.0
26
1.0
42.1
119
55.8
717
SMC5K28A
5GFG
31.1
34.4
1.0
28
1.0
45.4
110
60.2
664
SMC5K30A
5GFK
33.3
36.8
1.0
30
1.0
48.4
103
64.0
625
SMC5K33A
5GFM
36.7
40.6
1.0
33
1.0
53.3
93.8
69.8
573
SMC5K36A
5GFP
40.0
44.2
1.0
36
1.0
58.1
86.1
76.0
526
SMC5K40A
5GFR
44.4
49.1
1.0
40
1.0
64.5
77.5
84.0
476
SMC5K43A
5GFT
47.8
52.8
1.0
43
1.0
69.4
72.0
90.3
443
SMC5K45A
5GFV
50.0
55.3
1.0
45
1.0
72.7
68.8
94.6
423
SMC5K48A
5GFX
53.3
58.9
1.0
48
1.0
77.4
64.6
100
400
SMC5K51A
5GFZ
56.7
62.7
1.0
51
1.0
82.4
60.7
107
374
SMC5K54A
5GGE
60.0
66.3
1.0
54
1.0
87.1
57.4
113
354
SMC5K58A
5GGG
64.4
71.2
1.0
58
1.0
93.6
53.4
121
331
SMC5K60A
5GGK
66.7
73.7
1.0
60
1.0
96.8
51.7
125
320
SMC5K64A
5GGM
71.1
78.6
1.0
64
1.0
103
48.5
134
299
SMC5K70A
5GGP
77.8
86.0
1.0
70
1.0
113
44.2
146
274
SMC5K75A
5GGR
83.3
92.1
1.0
75
1.0
121
41.3
157
255
SMC5K78A
5GGT
86.7
95.8
1.0
78
1.0
126
39.7
163
245
SMC5K85A
5GGV
94.4
104
1.0
85
1.0
137
36.5
177
226
Notes
(1) Pulse test: t ≤ 50 ms
p
(2) Surge current waveform per fig. 3 and derated per fig.2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Thermal resistance
SYMBOL
TYP.
UNIT
RthJA (1)
90
°C/W
RthJM (2)
4.0
°C/W
Notes
(1) Thermal resistance junction-to-ambient to follow JEDEC® 51-2A, device mounted on FR4 PCB, 2 oz. standard footprint
(2) Thermal resistance junction-to-mount to follow JEDEC® 51-14 using Transient Dual Interface Test Method (TDIM)
IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C unless otherwise noted)
STANDARD
IEC 61000-4-2
TEST TYPE
Human body model (contact mode)
Human body model (air discharge mode)
TEST CONDITIONS
SYMBOL
C = 150 pF, R = 330 Ω
ESD
VALUE
30 kV
30 kV
Revision: 13-Sep-2022
Document Number: 87742
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMC5K10A thru SMC5K85A
www.vishay.com
Vishay General Semiconductor
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
SMC5K10A-M3/H (1)
0.257
H
850
7" diameter plastic tape and reel
SMC5K10A-M3/I (1)
0.257
I
3500
13" diameter plastic tape and reel
SMC5K10AHM3_A/H (2)
0.257
H
850
7" diameter plastic tape and reel
SMC5K10AHM3_A/I (2)
0.257
I
3500
13" diameter plastic tape and reel
Notes
(1) Available for SMC5K10A to SMC5K85A
(2) AEC-Q101 qualified, available for SMC5K10A to SMC5K20A only
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Axis Title
Axis Title
10000
150
10000
1000
10
100
1
2nd line
IPPM - Peak Pulse Current, % IRSM
100
1st line
2nd line
2nd line
PPPM - Peak Pulse Power (kW)
tr = 10 µs
TJ = 25 °C
Pulse width (td) is defined
as the point where the peak
current decays to 50 % of IPPM
1000
100
Peak value IPPM
1st line
2nd line
1000
Half value IPPM - IPPM/2
50
100
10/1000 µs waveform
td
10
10 000
0.1
100
1000
10
0
0.5
1.0
2.0
2.5
3.0
td - Pulse Width (µs)
tp - Time (ms)
Fig. 1 - Peak Pulse Power Derating Curve
Fig. 3 - Pulse Waveform
Axis Title
3.5
4.0
Axis Title
100
10000
10000
150
75
1000
50
100
25
2nd line
IPPM - Peak Pulse Current, % IRSM
tr = 8 µs
1st line
2nd line
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage (%)
1.5
TJ = 25 °C
Pulse width (td) is defined
as the point where the peak
current decays to 50 % of IPPM
1000
100
Peak value IPPM
1st line
2nd line
10
0
Half value IPPM - IPPM/2
100
50
8/20 µs waveform
td
10
0
0
25
50
75
100
125
150
10
0
0
20
40
60
TJ - Initial Temperature (°C)
tp - Time (µs)
Fig. 2 - Peak Pulse Power or Current vs.
Initial Junction Temperature
Fig. 4 - Pulse Waveform
80
Revision: 13-Sep-2022
Document Number: 87742
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMC5K10A thru SMC5K85A
www.vishay.com
Vishay General Semiconductor
Axis Title
Axis Title
100
1000
Measured at stand-off
voltage, VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
10
20
30
40
50
60
70
80
10
90
10000
100
R
JA
1000
1st line
2nd line
1000
2nd line
Transient Thermal Impedance (°C/W)
Measured at zero bias
10000
1st line
2nd line
2nd line
CJ - Junction Capacitance (pF)
1000
10000
100000
10
100
1
R
0.1
0.001
0.01
0.1
1
JM
10
100
10
1000
VWM - Reverse Stand-Off Voltage (V)
tp - Pulse Duration (s)
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Typical Transient thermal Impedance
Notes
• Fig.1 - Power calculations is based on IPPM times defined maximum clamping voltage by pulse width
• Fig.1 - 10 000 μs PPPM is actual test for VWM ≤ 60 V types, over 60 V types 10 000 μs PPPM is curve extensional value
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMC (DO-214AB)
Cathode Band
Mounting Pad Layout
0.185 (4.69) MAX.
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
0.114 (2.90)
0.126 (3.20) MIN.
0.280 (7.11)
0.260 (6.60)
0.060 (1.52) MIN.
0.012 (0.305)
0.006 (0.152)
0.320 (8.13) REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
Revision: 13-Sep-2022
Document Number: 87742
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000