SMP30A-M3/84A

SMP3V3 thru SMP36A www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES eSMP ® Series • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Available in unidirectional • 400 W peak pulse power capability with a 10/1000 μs waveform • Excellent clamping capability • Very fast response time SMP (DO-220AA) Anode • Low incremental surge resistance Cathode LINKS TO ADDITIONAL RESOURCES 3D 3D • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS 3D Models Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. PRIMARY CHARACTERISTICS VBR uni-directional 4.10 V to 44.2 V VWM 3.3 V to 36 V PPPM 400 W IFSM 40 A TJ max. 150 °C Polarity Unidirectional Package SMP (DO-220AA) MECHANICAL DATA Case: SMP (DO-220AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and industrial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2) Peak pulse current with a 10/1000 μs SYMBOL VALUE UNIT PPPM 400 W IPPM See table next page A waveform (1) Peak forward surge current 10 ms single half sine-wave (2) IFSM 40 A Maximum instantaneous forward voltage at 25 A (3) VF 2.5 V Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal (3) Pulse test: 300 μs pulse width, 1 % duty cycle Revision: 25-Apr-2022 Document Number: 88481 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMP3V3 thru SMP36A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) (3) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (A) (2) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 7.3 MIN. MAX. AC 4.10 5.10 1.0 3.3 200 54.8 SMP5.0A AE 6.40 7.07 10 5.0 150 43.5 9.2 SMP6.0A AG 6.67 7.37 10 6.0 600 38.8 10.3 SMP6.5A AK 7.22 7.98 10 6.5 100 35.7 11.2 SMP7.0A AM 7.78 8.60 10 7.0 50 33.3 12.0 SMP7.5A AN 8.33 9.21 1.0 7.5 50 31.0 12.9 SMP8.0A AR 8.89 9.83 1.0 8.0 20 29.4 13.6 SMP11A AZ 12.2 13.5 1.0 11 1.0 22.0 18.2 SMP12A BE 13.3 14.7 1.0 12 1.0 20.1 19.9 SMP13A BG 14.4 15.9 1.0 13 1.0 18.6 21.5 SMP14A BK 15.6 17.2 1.0 14 1.0 17.2 23.2 SMP15A BM 16.7 18.5 1.0 15 1.0 16.4 24.4 SMP16A BP 17.8 19.7 1.0 16 1.0 15.4 26.0 SMP17A BR 18.9 20.9 1.0 17 1.0 14.5 27.6 SMP18A BT 20.0 22.1 1.0 18 1.0 13.7 29.2 SMP20A BV 22.2 24.5 1.0 20 1.0 12.3 32.4 SMP22A BX 24.4 26.9 1.0 22 1.0 11.3 35.5 SMP24A BZ 26.7 29.5 1.0 24 1.0 10.3 38.9 SMP26A CE 28.9 31.9 1.0 26 1.0 9.5 42.1 SMP28A CG 31.1 34.4 1.0 28 1.0 8.8 45.4 SMP30A CK 33.3 36.8 1.0 30 1.0 8.3 48.4 SMP33A CM 36.7 40.6 1.0 33 1.0 7.5 53.3 SMP36A CP 40.0 44.2 1.0 36 1.0 6.9 58.1 SMP3V3 Notes (1) V BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Typical thermal resistance, junction to lead (1) RθJL 50 °C/W Typical thermal resistance, junction to ambient (2) RθJA 250 °C/W Notes Mounted on PCB with 5.0 mm x 5.0 mm copper pad areas attached to each terminal (2) Mounted on minimum recommended pad layout (1) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMP3V3-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel SMP3V3-M3/85A 0.024 85A 10 000 13" diameter plastic tape and reel SMP11A-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel SMP11A-M3/85A 0.024 85A 10 000 13" diameter plastic tape and reel Revision: 25-Apr-2022 Document Number: 88481 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMP3V3 thru SMP36A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 000 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C Measured at Zero Bias 1000 1 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pad Areas 0.1 0.1 100 10 1000 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 000 1 100 10 td - Pulse Width (µs) VWM - Reverse Stand-Off Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance 100 75 50 25 0 0 Measured at Stand-Off Voltage, VWM 10 1 Transient Thermal Impedance (°C/W) Peak Pulse Power (PPP) of Current (IPP) Derating in Percentage (%) CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 10 25 50 75 100 125 150 175 200 1000 100 10 1 0.1 0.001 0.01 0.1 1 10 100 1000 TJ - Initial Temperature (°C) t - Pulse Duration (s) Fig. 2 - Pulse Derating Curve Fig. 5 - Typical Transient Thermal Impedance IPPM - Peak Pulse Current, % IRSM 150 tr = 10 µs Peak Value IPPM 100 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 t - Time (ms) Fig. 3 - Pulse Waveform Revision: 25-Apr-2022 Document Number: 88481 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SMP3V3 thru SMP36A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMP (DO-220AA) 0.012 (0.30) REF. Cathode Band 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.036 (0.91) 0.024 (0.61) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.158 (4.00) 0.146 (3.70) Mounting pad layout 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.025 0.030 (0.635) (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.050 (1.27) Revision: 25-Apr-2022 Document Number: 88481 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000