SOMC200110K0GEA

SOMC www.vishay.com Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Medium Body, Small Outline, Molded DIP, Surface Mount FEATURES • Isolated, bussed and dual terminator schematics available Available • 14, 16, or 20 terminal package • Molded case construction • Thick film resistive elements • Reflow solderable Available • Compatible with automatic surface mounting equipment • Reduces total assembly costs • For wave flow soldering contact factory • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details STANDARD ELECTRICAL SPECIFICATIONS RATING POWER RATING (3) RESISTANCE MAXIMUM WORKING TEMPERATURE GLOBAL CIRCUIT POWER RANGE VOLTAGE (2) COEFFICIENT (1) ELEMENT P70 °C PACKAGE P70 °C TOLERANCE ±% MODEL  W W VDC ± ppm/°C 01 0.08 1.05 1, 2, 5 10 to 1M 50 100 SOMC14 03 0.16 1.125 1, 2, 5 10 to 1M 50 100 05 0.08 1.05 1, 2, 5 10 to 1M 50 100 01 0.08 1.20 1, 2, 5 10 to 1M 50 100 SOMC16 03 0.16 1.28 1, 2, 5 10 to 1M 50 100 05 0.08 1.20 1, 2, 5 10 to 1M 50 100 01 0.08 1.52 1, 2, 5 10 to 1M 50 100 SOMC20 03 0.16 1.60 1, 2, 5 10 to 1M 50 100 05 0.08 1.52 1, 2, 5 10 to 1M 50 100 Notes • DSCC has created series of drawings to support the need for a surface mount gull wing resistor network product. Vishay Dale is listed as a resource on this drawing as follows: POWER POWER TEMPERATURE MAXIMUM RATING RATING RESISTANCE TOLERANCE COEFFICIENT WORKING CIRCUIT ELEMENT PACKAGE RANGE ±% (0 °C to 70 °C) VOLTAGE (2) P70 °C P70 °C  ± ppm/°C VDC W W SOMC1601..16 01 (B) 0.08 87012 SOMC1603..17 03 (A) 0.16 1.20 10 to 2.2M 1, 2, 5 100, 300 50 SOMC1605..48 05 (J) 0.08 SOMC1401..6 01 (B) 0.08 87013 SOMC1403..13 03 (A) 0.16 1.00 10 to 2.2M 1, 2, 5 100, 300 50 SOMC1405..22 05 (J) 0.08 These drawings can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg. • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material • Jumper: 0 -resistor on request (100 m) • Packaging: According to EIA; see appropriate catalog or web page (1) Temperature range: -55 °C to +125 °C (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (3) ± 2 % standard, ± 1 % and ± 5 % available DSCC DRAWING NUMBER VISHAY DALE MODEL TECHNICAL SPECIFICATIONS PARAMETER Rated dissipation at 70 °C per element Limiting element voltage (1) Voltage coefficient Insulation voltage (1 min) Category temperature range Insulation resistance TC tracking (-55 °C to +125 °C) Note (1) Rated voltage: P x R Revision: 18-Apr-17 UNIT W VDC ppm/V VDC/AC peak °C  ppm/°C 01 CIRCUIT 0.08 03 CIRCUIT 0.16 50 < 50 200 -55 / +150 > 1010 50 05 CIRCUIT 0.08 Document Number: 31508 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOMC www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOMC16011K00GDC (preferred part numbering format) S O GLOBAL MODEL M C 1 6 PIN COUNT SCHEMATIC 14 16 20 01 = bussed 03 = isolated 00 = special SOMC 0 1 1 K 0 RESISTANCE VALUE TOLERANCE CODE R= K = k M = M 10R0 = 10  680K = 680 k 1M00 = 1.0 M 0000 = 0  jumper F=±1% G=±2% J=±5% S = special Z=0 jumper 0 G D C PACKAGING SPECIAL EJ = lead (Pb)-free, tube EA = lead (Pb)-free, tape and reel Blank = standard (dash number) (up to 3 digits) from 1 to 999 as applicable DC = tin / lead, tube RZ = tin / lead, tape and reel Historical Part Number Example: SOMC1601102G (will continue to be accepted) SOMC 16 01 102 G D02 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: SOMC2005500BGRZ (preferred part numbering format) S O GLOBAL MODEL M C 2 0 PIN COUNT SCHEMATIC 14 16 20 05 = dual terminator SOMC 0 5 5 0 0 RESISTANCE VALUE TOLERANCE CODE 3 digit impedance code, followed by alpha modifier (see Impedance table) F=±1% G=±2% J=±5% B G R Z PACKAGING SPECIAL EJ = lead (Pb)-free, tube EA = lead (Pb)-free, tape and reel Blank = standard (dash number) up to 3 digits from 1 to 999 as applicable DC = tin / lead, tube RZ = tin / lead, tape and reel Historical Part Number Example: SOMC2005820131G (will continue to be accepted) SOMC 20 05 820 131 G R61 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING Note • For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc?31540) Revision: 18-Apr-17 Document Number: 31508 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOMC www.vishay.com Vishay Dale CIRCUIT APPLICATIONS 01 Schematic 13, 15, or 19 resistors with one pin common The SOMCxx01 circuit provides a choice of 13, 15, or 19 nominally equal resistors, each connected between a common lead (14, 16, or 20) and a discrete PC board pin. Commonly used in the following applications: Pin 1 • TTL input pull-down • Digital pulse squaring • TTL unused gate pull-up • High speed parallels pull-up • MOS/ROM pull-up/pull-down • Open collector pull-up • “Wired OR” pull-up • Power driven pull-up SOMC14 SOMC16 SOMC20 03 Schematic 7, 8, or 10 isolated resistors The SOMCxx03 circuit provides a choice of 7, 8, or 10 nominally equal resistors with each resistor isolated from all others and wired directly across. Commonly used in the following applications: Pin 1 • Long-line Impedance balancing • LED current limiting • ECL output pull-down • TTL input pull-down • “Wired OR” pull-up • Power driven pull-up • Powergate pull-up • Line termination SOMC14 SOMC16 SOMC20 05 Schematic R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R1 R1 R2 R2 R1 R2 R1 R2 R2 R1 R2 R1 R2 R2 R1 R2 R2 TTL dual-line terminator; pulse squaring, 12, 14, or 18 pairs of resistors (R1 resistors are common to leads 14, 16, or 20) (R2 resistors are common to leads 7, 8, or 10) The SOMCxx05 circuit contains 12, 14, or 18 pairs of resistors. Each pair is connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for TTL dual-line termination and pulse squaring. SOMC14, SOMC16, SOMC20 Pin 1 DIMENSIONS Pin 1 SOLDER PAD DIMENSIONS in millimeters a b c l p w WAVE 0.64 1.91 5.34 9.53 1.27 9.15 REFLOW 0.64 1.91 5.34 9.53 1.27 9.15 Notes • The dimension shown are for a 16 pin part. For parts with different pin numbers use the same pitch and add or subtract pads as required • Maximum solder reflow temperature +255 °C DIMENSIONS in millimeters PIN NO# L W B E F G H K R S T 14 9.91 7.62 7.62 6.20 5.59 2.16 2.03 0.914 0.457 1.27 1.14 16 11.18 7.62 8.89 6.20 5.59 2.16 2.03 0.914 0.457 1.27 1.14 20 13.72 7.62 11.43 6.20 5.59 2.16 2.03 0.914 0.457 1.27 1.14 ± 0.254 ± 0.381 ± 0.254 ± 0.381 ± 0.127 ± 0.127 ± 0.127 ± 0.076 ± 0.254 Tol. MARKING INFORMATION 1 % parts have 4 digits while 2 % and 5 % parts have 3 digits. Revision: 18-Apr-17 Document Number: 31508 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOMC www.vishay.com Vishay Dale IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note • For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530) PERFORMANCE TEST TEST RESULTS (TYPICAL TEST LOTS) CONDITIONS OF TEST Power conditioning MIL-STD-202 ± 0.5 % Load life at 70 °C MIL-STD-202 ± 0.5 % Short time overload MIL-STD-202 ± 0.25 % Thermal shock MIL-STD-202 ± 0.5 % Moisture resistance MIL-STD-202 ± 0.5 % Resistance to soldering heat MIL-STD-202 ± 0.25 % Low temperature operation MIL-STD-202 ± 0.25 % Vibration MIL-STD-202 ± 0.25 % Shock MIL-STD-202 ± 0.25 % Terminal strength MIL-STD-202 ± 0.25 % MECHANICAL SPECIFICATIONS Marking Marking resistance to solvents Maximum solder reflow temperature Solderability Terminals Body Revision: 18-Apr-17 Model number, schematic number, value tolerance, pin 1 indicator, date code Permanency testing per MIL-STD-202, method 215 +255 °C Per MIL-STD-202, method 208E Copper alloy. Solder dipped terminal Molded epoxy Document Number: 31508 4 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000