SQA405EJ-T1_GE3

SQA405EJ www.vishay.com Vishay Siliconix Automotive P-Channel 40 V (D-S) 175 °C MOSFET FEATURES PowerPAK® SC-70-6L Single S 4 D 5 • TrenchFET® power MOSFET D 6 • AEC-Q101 qualified • 100 % Rg and UIS tested • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 05 2. S 7 m m 1 m 5m 2.0 Top View 3 G Bottom View 2 D 1 D S         Marking Code: QEXXXX PRODUCT SUMMARY VDS (V) -40 RDS(on) () at VGS = -10 V 0.035 RDS(on) () at VGS = -4.5 V 0.050 ID (A) -10 Configuration Package G P-Channel MOSFET D Single PowerPAK SC-70 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER Drain-source voltage SYMBOL VDS LIMIT -40 Gate-source voltage VGS ± 20 Continuous drain current TC = 25 °C TC = 125 °C Continuous source current (diode conduction) a Pulsed drain current b Single pulse avalanche current Single pulse avalanche energy Maximum power dissipation b L = 0.1 mH TC = 25 °C TC = 125 °C Operating junction and storage temperature range ID V -10 -10 IS 10 IDM -40 IAS -15 EAS 11.25 PD UNIT 13.6 4.5 A mJ W TJ, Tstg -55 to +175 °C SYMBOL LIMIT UNIT RthJA 90 RthJF 11 THERMAL RESISTANCE RATINGS PARAMETER Junction-to-ambient Junction-to-case (drain) PCB mount c °C/W Notes a. Package limited b. Pulse test; pulse width  300 μs, duty cycle  2 % c. When mounted on 1" square PCB (FR4 material) S18-0238-Rev. A, 26-Feb-18 Document Number: 76032 1 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA405EJ www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-source breakdown voltage Gate-source threshold voltage Gate-source leakage Zero gate voltage drain current On-state drain current a Drain-source on-state resistance a Forward transconductance b VDS VGS = 0, ID = -250 μA -40 - - VGS(th) VDS = VGS, ID = -250 μA -1.5 -2.0 -2.5 VDS = 0 V, VGS = ± 20 V IGSS IDSS ID(on) RDS(on) gfs - - ± 100 VGS = 0 V VDS = -30 V - - -1 VGS = 0 V VDS = -40 V, TJ = 125 °C - - -50 VGS = 0 V VDS = -40 V, TJ = 175 °C - - -150 VGS = -10 V VDS  5 V -8 - - VGS = -10 V ID = -5 A - 0.027 0.035 VGS = -10 V ID = -5 A, TJ = 125 °C - - 0.067 VGS = -10 V ID = -5 A, TJ = 175 °C - - 0.080 VGS = -4.5 V ID = -4 A - 0.038 0.050 - 18 - - 1450 1815 - 105 131 - 92 115 - 26 33 - 4.1 - - 4.8 - 4.4 7.4 11.8 - 9 15 VDS = -10 V, ID = -7 A V nA μA A  S Dynamic b Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge c Qg Gate-source charge c Qgs Gate-drain charge c Qgd Gate resistance Turn-on delay time c Rise time c Turn-off delay time c Fall time c Rg VGS = 0 V VDS = -25 V, f = 1 MHz VGS = -10 V VDS = -20 V, ID = -8 A f = 1 MHz td(on) tr td(off) VDD = -20 V, RL = 8  ID  -2.5 A, VGEN = -10 V, Rg = 1  tf - 4 8 - 36 55 - 10 16 pF nC  ns Source-Drain Diode Ratings and Characteristics Pulsed current a ISM Forward voltage VSD IF = -5 A, VGS = 0 - - -40 A - -0.84 -1.2 V Notes a. Pulse test; pulse width  300 μs, duty cycle  2 % b. Guaranteed by design, not subject to production testing c. Independent of operating temperature  Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S18-0238-Rev. A, 26-Feb-18 Document Number: 76032 2 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA405EJ www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) Axis Title 50 Axis Title 10000 VGS = 6 V thru 10 V 10000 30 VGS = 5 V VGS = 4 V 20 100 1000 18 1st line 2nd line 1000 30 2nd line ID - Drain Current (A) 24 1st line 2nd line 2nd line ID - Drain Current (A) 40 12 100 TC = 25 °C 6 10 TC = 125 °C 0 0 1 2 3 4 TC = -55 °C 0 10 10 0 5 1 2 3 4 VDS - Drain-to-Source Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Output Characteristics Transfer Characteristics 5 Axis Title 30 0.150 10000 1000 18 TC = 125 °C 12 100 6 RDS(on) - On-Resistance (Ω) TC = 25 °C 1st line 2nd line 2nd line gfs - Transconductance (S) TC = -55 °C 24 0.120 0.090 VGS = 4.5 V 0.060 0.030 VGS = 10 V 0 0.000 10 0 3 6 9 12 0 15 6 12 24 ID - Drain Current (A) 2nd line Transconductance On-Resistance vs. Drain Current 30 Axis Title Axis Title 10 Ciss 1st line 2nd line 1320 880 Crss 440 Coss 10000 ID = 8 A VDS = 20 V 8 1000 6 1st line 2nd line 1760 2nd line VGS - Gate-to-Source Voltage (V) 2200 2nd line C - Capacitance (pF) 18 ID - Drain Current (A) 2nd line 4 100 2 0 0 0 8 16 24 32 40 10 0 7 14 21 28 VDS - Drain-to-Source Voltage (V) 2nd line Qg - Total Gate Charge (nC) 2nd line Capacitance Gate Charge S18-0238-Rev. A, 26-Feb-18 35 Document Number: 76032 3 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA405EJ www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) Axis Title 2nd line RDS(on) - On-Resistance (Normalized) 2.0 10000 0.5 ID = 2.5 A 1.7 1000 1st line 2nd line 1.4 VGS = 4.5 V 1.1 100 2nd line VGS(th) Variance (V) 0.2 VGS = 10 V 0.8 -0.1 ID =-5 mA -0.4 ID = -250 μA -0.7 0.5 10 -50 -25 0 25 50 -1.0 75 100 125 150 175 -50 -25 0 25 75 100 125 150 175 TJ - Temperature (°C) 2nd line On-Resistance vs. Junction Temperature Threshold Voltage Axis Title Axis Title -40 1000 1st line 2nd line 0.120 0.080 100 TJ = 125 °C 0.040 TJ = 25 °C 0.000 10 0 2 4 6 8 ID = 1 mA -44 -48 1st line 2 d li 0.160 2nd line VDS - Drain-to-Source Voltage (V) 10000 0.200 RDS(on) - On-Resistance (Ω) 50 TJ - Junction Temperature (°C) 2nd line -52 -56 -60 -50 -25 10 0 25 50 75 100 125 150 175 VGS - Gate-to-Source Voltage (V) 2nd line TJ - Junction Temperature (°C) 2nd line On-Resistance vs. Gate-to-Source Voltage Drain Source Breakdown vs. Junction Temperature Axis Title Axis Title 10000 100 10000 100 1 TJ = 25 °C 100 0.1 10 1000 100 μs 1 1 ms 0.01 10 0 0.3 0.6 0.9 1.2 1.5 VSD - Source-to-Drain Voltage (V) 2nd line Source-Drain Diode Forward Voltage S18-0238-Rev. A, 26-Feb-18 100 Limited by RDS(on) (1) 10 ms 100 ms 1 s, 10 s, DC 0.1 TC = 25 °C Single pulse 0.01 0.01 (1) 0.1 BVDSS limited 1 1st line 2nd line 1000 2nd line ID - Drain Current (A) TJ = 150 °C 1st line 2nd line 2nd line IS - Source Current (A) IDM limited 10 10 10 100 VDS - Drain-to-Source Voltage (V) VGS > minimum VGS at which RDS(on) is specified Safe Operating Area Document Number: 76032 4 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA405EJ www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.05 PDM 0.1 0.02 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = RthJA = 90 °C/W 3. TJM - T A = PDMZthJA(t) Single Pulse 0.01 10-4 10-3 4. Surface Mounted 10-2 10-1 1 Square Wave Pulse Duration (s) 10 100 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10-1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Foot Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions           Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?76032. S18-0238-Rev. A, 26-Feb-18 Document Number: 76032 5 For technical questions, contact: automostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix b e PIN1 PIN3 PIN1 PIN2 PIN3 PIN5 K1 E1 E1 K PIN6 K3 D1 D1 K D2 D1 E3 E1 E2 K4 K L PIN2 b e L PowerPAK® SC70-6L PIN6 PIN4 K2 PIN5 K1 K2 BACKSIDE VIEW OF SINGLE PIN4 K2 BACKSIDE VIEW OF DUAL A D C A1 E Notes: 1. All dimensions are in millimeters 2. Package outline exclusive of mold flash and metal burr 3. Package outline inclusive of plating Z z DETAIL Z SINGLE PAD DIM A MILLIMETERS DUAL PAD INCHES MILLIMETERS INCHES Min Nom Max Min Nom Max Min Nom Max Min Nom Max 0.675 0.75 0.80 0.027 0.030 0.032 0.675 0.75 0.80 0.027 0.030 0.032 A1 0 - 0.05 0 - 0.002 0 - 0.05 0 - 0.002 b 0.23 0.30 0.38 0.009 0.012 0.015 0.23 0.30 0.38 0.009 0.012 0.015 C 0.15 0.20 0.25 0.006 0.008 0.010 0.15 0.20 0.25 0.006 0.008 0.010 D 1.98 2.05 2.15 0.078 0.081 0.085 1.98 2.05 2.15 0.078 0.081 0.085 D1 0.85 0.95 1.05 0.033 0.037 0.041 0.513 0.613 0.713 0.020 0.024 0.028 D2 0.135 0.235 0.335 0.005 0.009 0.013 E 1.98 2.05 2.15 0.078 0.081 0.085 1.98 2.05 2.15 0.078 0.081 0.085 E1 1.40 1.50 1.60 0.055 0.059 0.063 0.85 0.95 1.05 0.033 0.037 0.041 E2 0.345 0.395 0.445 0.014 0.016 0.018 E3 0.425 0.475 0.525 0.017 0.019 0.021 e 0.65 BSC 0.026 BSC 0.65 BSC 0.026 BSC K 0.275 TYP 0.011 TYP 0.275 TYP 0.011 TYP K1 0.400 TYP 0.016 TYP 0.320 TYP 0.013 TYP K2 0.240 TYP 0.009 TYP 0.252 TYP 0.010 TYP K3 0.225 TYP 0.009 TYP K4 L 0.355 TYP 0.175 0.275 0.014 TYP 0.375 T 0.007 0.011 0.015 0.175 0.275 0.375 0.007 0.011 0.015 0.05 0.10 0.15 0.002 0.004 0.006 ECN: C-07431 − Rev. C, 06-Aug-07 DWG: 5934 Document Number: 73001 06-Aug-07 www.vishay.com 1 Application Note 826 Vishay Siliconix RECOMMENDED PAD LAYOUT FOR PowerPAK® SC70-6L Single 0.300 (0.012) 0.650 (0.026) 0.350 (0.014) 0.275 (0.011) 0.550 (0.022) 0.475 (0.019) 2.200 (0.087) 1.500 (0.059) 0.870 (0.034) 0.235 (0.009) 0.355 (0.014) 0.350 (0.014) 1 0.650 (0.026) 0.300 (0.012) 0.950 (0.037) Dimensions in mm/(Inches) Return to Index APPLICATION NOTE Document Number: 70486 Revision: 21-Jan-08 www.vishay.com 11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000