SQA411CEJW-T1_GE3

SQA411CEJW www.vishay.com Vishay Siliconix Automotive P-Channel 60 V (D-S) 175 °C MOSFET FEATURES PowerPAK® SC-70W-6L Single S 4 D 5 • TrenchFET® power MOSFET D 6 • AEC-Q101 qualified • Wettable flank terminals • 100 % Rg and UIS tested 2. 05 m m 1 m 5m 2.0 Top View S 7 3 G 2 D 1 D • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 S Bottom View Marking Code: Q8XXXX PRODUCT SUMMARY G VDS (V) -60 RDS(on) (Ω) at VGS = -10 V 0.1550 RDS(on) (Ω) at VGS = -4.5 V 0.2130 ID (A) -6.46 Configuration Single D P-Channel MOSFET ORDERING INFORMATION Package PowerPAK SC-70W-6L Lead (Pb)-free and halogen-free SQA411CEJW (for detailed order number please see www.vishay.com/doc?79776) ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-source voltage VDS -60 Gate-source voltage VGS ± 20 Continuous drain current TC = 25 °C TC = 125 °C Continuous source current (diode conduction) a Pulsed drain current b Single pulse avalanche current Single pulse avalanche energy Maximum power dissipation L = 0.1 mH TC = 25 °C TC = 125 °C Operating junction and storage temperature range ID -3.73 -9 IDM -20 IAS -14 PD TJ, Tstg Soldering recommendations (peak temperature) d, e V -6.46 IS EAS UNIT 9.8 13.6 4.5 -55 to +175 260 A mJ W °C THERMAL RESISTANCE RATINGS PARAMETER Junction-to-ambient Junction-to-case (drain) PCB mount c SYMBOL LIMIT RthJA 90 RthJC 11 UNIT °C/W Notes a. Package limited b. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 % c. When mounted on 1" square PCB (FR4 material) d. See solder profile (www.vishay.com/doc?73257). The PowerPAK SC-70W-6L is a leadless package and features wettable flank terminals. The end of the lead terminal is plated with tin. e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components S21-1147-Rev. A, 06-Dec-2021 Document Number: 63171 1 For technical questions, contact: automos.techsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA411CEJW www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-source breakdown voltage Gate-source threshold voltage Gate-source leakage Zero gate voltage drain current On-state drain current a Drain-source on-state resistance a Forward transconductance b VDS VGS = 0 V, ID = -250 μA -60 - - VGS(th) VDS = VGS, ID = -250 μA -1.5 -2.0 -2.5 VDS = 0 V, VGS = ± 20 V IGSS IDSS ID(on) RDS(on) gfs - - ± 100 VGS = 0 V VDS = -60 V - - -1 VGS = 0 V VDS = -60 V, TJ = 125 °C - - -50 VGS = 0 V VDS = -60 V, TJ = 175 °C - - -250 VGS = -10 V VDS ≥ -5 V -6 - - VGS = -10 V ID = -3.5 A - 0.1255 0.1550 VGS = -10 V ID = -3.5 A, TJ = 125 °C - - 0.2639 VGS = -10 V ID = -3.5 A, TJ = 175 °C - - 0.3261 VGS = -4.5 V ID = -3 A - 0.1645 0.2130 - 6 - - 421 590 - 64 90 - 35 50 VDS = -15 V, ID = -3.5 A V nA μA A Ω S Dynamic b Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge c Qg Gate-source charge c Qgs Gate-drain charge c Qgd Gate resistance Turn-on delay time c Rise timec Turn-off delay time c Fall time c Rg VGS = 0 V VGS = -10 V VDS = -25 V, f = 1 MHz VDS = -30 V, ID = -6.5 A f = 1 MHz td(on) tr td(off) VDD = -30 V, RL = 12 Ω ID ≅ -2.5 A, VGEN = -10 V, Rg = 1 Ω tf Source-Drain Diode Ratings and Characteristics - 10.2 15.5 - 2.2 - - 2.6 - 2.50 5.18 7.80 - 7 12 - 4 7 - 17 29 - 4 7 nC Ω ns b Pulsed current a ISM Forward voltage VSD IF = -3.5 A, VGS = 0 V - - -20 - -0.88 -1.2 V - 24 48 ns - 28 56 nC - 21 - Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Reverse recovery fall time ta Reverse recovery rise time tb - 3 - IRM(REC) - -3.4 - Body diode peak reverse recovery current pF IF = -2 A, di/dt = 100 A/μs A ns A Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 % b. Guaranteed by design, not subject to production testing c. Independent of operating temperature Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S21-1147-Rev. A, 06-Dec-2021 Document Number: 63171 2 For technical questions, contact: automos.techsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA411CEJW www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) Axis Title Axis Title 20 8 1000 1st line 2nd line 12 VGS = 4 V 8 100 2nd line ID - Drain Current (A) VGS = 10 V thru 5 V 4 0 4 6 8 4 TC = 25 °C 10 100 TC = 125 °C TC = -55 °C 0 10 2 1000 6 2 VGS = 3 V 0 10000 1st line 2nd line 16 2nd line ID - Drain Current (A) 10 10000 0 2 4 10 6 8 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 10 Axis Title Axis Title 0.5 10000 10 10000 1000 6 TC = 125 °C 4 100 2 10 0 0 2 4 6 8 0.4 1000 0.3 VGS = 4.5 V 0.2 100 0.1 VGS = 10 V 0 10 10 0 2 4 Transconductance On-Resistance vs. Drain Current Axis Title 100 Coss 100 Crss 10 10 30 40 50 60 10000 ID = 6.5 A VDS = 30 V 8 1000 6 1st line 2nd line 1000 2nd line VGS - Gate-to-Source Voltage (V) Ciss 20 4 100 2 0 10 0 3 6 9 12 VDS - Drain-to-Source Voltage (V) Qg - Total Gate Charge (nC) Capacitance Gate Charge S21-1147-Rev. A, 06-Dec-2021 10 10 10000 1st line 2nd line 2nd line C - Capacitance (pF) 8 ID - Drain Current (A) Axis Title 10 6 ID - Drain Current (A) 1000 0 1st line 2nd line TC = 25 °C 2nd line RDS(on) - On-Resistance (Ω) 8 1st line 2nd line 2nd line gfs - Transconductance (S) TC = -55 °C 15 Document Number: 63171 3 For technical questions, contact: automos.techsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA411CEJW www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) Axis Title Axis Title 10000 ID = 3.5 A 0.7 1000 1.5 VGS = 4.5 V 1.1 100 0.7 ID = -250 μA 1000 0.4 ID = -5 mA 0.1 100 -0.2 10 0.3 -50 -25 0 25 50 -0.5 75 100 125 150 175 10 -50 -25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (°C) TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature Threshold Voltage Axis Title Axis Title -60 0.60 1000 1st line 2nd line 0.45 TJ = 150 °C 0.30 100 0.15 TJ = 25 °C 0 2nd line VDS - Drain-to-Source Voltage (V) 10000 2 4 6 8 ID = 1 mA -63 1000 -66 -69 100 -72 -75 10 0 10000 1st line 2nd line 0.75 2nd line RDS(on) - On-Resistance (Ω) 1st line 2nd line VGS = 10 V 2nd line VGS(th) - Variance (V) 1.9 1st line 2nd line 2nd line RDS(on) - On-Resistance (Normalized) 1.0 10000 2.3 10 -50 -25 10 0 25 50 75 100 125 150 175 VGS - Gate-to-Source Voltage (V) TJ - Junction Temperature (°C) On-Resistance vs. Gate-to-Source Voltage Drain Source Breakdown vs. Junction Temperature Axis Title Axis Title 100 10000 100 10000 TJ = 150 °C 1 100 TJ = 25 °C 0.1 10 1000 100 μs ID limited 1 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1 ms 10 ms 100 100 ms, 1 s, 10 s, DC Limited by RDS(on) a 0.1 BVDSS limited TC = 25 °C, single pulse 0.01 0.01 0.01 1st line 2nd line 1000 2nd line ID - Drain Current (A) 10 1st line 2nd line 2nd line IS - Source Current (A) IDM limited 10 0.1 1 10 VSD - Source-to-Drain Voltage (V) VDS - Drain-to-Source Voltage (V) Source Drain Diode Forward Voltage Safe Operating Area 100 Note a. VGS > minimum VGS at which RDS(on) is specified S21-1147-Rev. A, 06-Dec-2021 Document Number: 63171 4 For technical questions, contact: automos.techsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQA411CEJW www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 1 Normalized Effective Transient Thermal Impedance Duty cycle = 0.5 0.2 0.1 Notes: 0.05 PDM 0.1 0.02 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = RthJA = 90 °C/W 3. TJM - T A = PDMZthJA(t) Single pulse 0.01 10-4 4. Surface Mounted 10-3 10-2 10-1 1 Square Wave Pulse Duration (s) 10 100 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient Normalized Effective Transient Thermal Impedance 2 1 Duty cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single pulse 0.01 10-4 10-3 10-2 10-1 1 10 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package / tape drawings, part marking, and reliability data, see www.vishay.com/ppg?63171. S21-1147-Rev. A, 06-Dec-2021 Document Number: 63171 5 For technical questions, contact: automos.techsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix PowerPAK® SC70W-6L SIDEWETTABLE e1 2x A D K6 4x 1 A B Pin 1 index e 4x L1 2 3 L K E K5 E2 E1 K2 D1 K1 K3 D2 K4 K 2x L 6 Top view b1 6x 5 b 6x 4 0.1 M C A B 0.05 M C Bottom view 2x 0.10 C 0.10 C C 0.05 C A1 A2 See detail Z DIM. MIN. 0.70 0.00 0.10 0.25 0.15 0.20 1.95 0.88 0.20 1.95 1.06 0.82 A A1 A2 b b1 C D D1 D2 E E1 E2 e e1 K K1 K2 K3 K4 K5 K6 L 0.15 L1 ECN: C19-1644-Rev. A, 10-Jan-2020 DWG: 6076 0.05 C Detail Z (2:1) C MILLIMETERS NOM. 0.80 0.02 0.30 0.20 0.25 2.05 0.98 0.25 2.05 1.16 0.87 0.65 BSC 1.30 BSC 0.20 typ. 0.47 typ. 0.23 typ. 0.18 typ. 0.35 typ. 0.35 typ. 0.38 typ. 0.25 0.10 MAX. 0.90 0.05 0.35 0.23 0.30 2.15 1.08 0.30 2.15 1.26 0.92 MIN. 0.027 0.000 0.004 0.010 0.006 0.008 0.077 0.035 0.008 0.077 0.042 0.032 0.35 - 0.006 - INCHES NOM. 0.031 0.001 0.012 0.008 0.010 0.081 0.039 0.010 0.081 0.046 0.034 0.026 BSC 0.051 BSC 0.008 typ. 0.019 typ. 0.009 typ. 0.007 typ. 0.014 typ. 0.014 typ. 0.015 typ. 0.010 0.004 MAX. 0.035 0.002 0.014 0.009 0.012 0.085 0.043 0.012 0.085 0.050 0.036 0.014 - Notes • Package outline exclusive of mold flash and metal burr • Package outline inclusive of plating Document Number: 77413 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revison: 10-Jan-2020 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000