SQJ461EP
www.vishay.com
Vishay Siliconix
Automotive P-Channel 60 V (D-S) 175 °C MOSFET
FEATURES
PRODUCT SUMMARY
VDS (V)
• Halogen-free According to IEC 61249-2-21
Definition
• TrenchFET® Power MOSFET
• AEC-Q101 Qualifiedd
• 100 % Rg and UIS Tested
• Compliant to RoHS Directive 2002/95/EC
- 60
RDS(on) (Ω) at VGS = - 10 V
0.016
RDS(on) (Ω) at VGS = - 4.5 V
0.021
ID (A)
- 30
Configuration
Single
PowerPAK® SO-8L Single
S
m
5m
6.1
5.1
3m
m
G
D
4
G
S
3
S
D
2
S
1
P-Channel MOSFET
ORDERING INFORMATION
Package
PowerPAK SO-8L
Lead (Pb)-free and Halogen-free
SQJ461EP-T1-GE3
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
Drain-Source Voltage
VDS
- 60
Gate-Source Voltage
VGS
± 20
Continuous Drain Currenta
TC = 25 °C
ID
TC = 125 °C
Continuous Source Current (Diode Conduction)a
Pulsed Drain
Currentb
Single Pulse Avalanche Current
Single Pulse Avalanche Energy
Maximum Power Dissipationb
L = 0.1 mH
TC = 25 °C
Operating Junction and Storage Temperature Range
- 29
- 30
IDM
- 120
IAS
- 50
EAS
125
TJ, Tstg
Soldering Recommendations (Peak Temperature)e, f
V
- 30
IS
PD
TC = 125 °C
UNIT
83
27
- 55 to + 175
260
A
mJ
W
°C
THERMAL RESISTANCE RATINGS
PARAMETER
Junction-to-Ambient
PCB Mountc
Junction-to-Case (Drain)
SYMBOL
LIMIT
RthJA
65
RthJC
1.8
UNIT
°C/W
Notes
a. Package limited.
b. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.
c. When mounted on 1" square PCB (FR-4 material).
d. Parametric verification ongoing.
e. See Solder Profile (www.vishay.com/doc?73257). The PowerPAK SO-8L. The end of the lead terminal is exposed copper (not plated) as a
result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to
ensure adequate bottom side solder interconnection.
f. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components.
S11-2288-Rev. E, 28-Nov-11
1
Document Number: 65541
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SQJ461EP
www.vishay.com
Vishay Siliconix
SPECIFICATIONS (TC = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
Static
Drain-Source Breakdown Voltage
Gate-Source Threshold Voltage
Gate-Source Leakage
- 60
-
-
- 1.5
- 2.0
- 2.5
VDS = 0 V, VGS = ± 20 V
-
-
± 100
-
-
-1
IDSS
On-State Drain Currenta
ID(on)
Drain-Source On-State Resistancea
Forward
VGS = 0 , ID = - 250 μA
VDS = VGS, ID = - 250 μA
IGSS
Zero Gate Voltage Drain Current
Transconductanceb
VDS
VGS(th)
RDS(on)
gfs
VGS = 0 V
VDS = - 60 V
VGS = 0 V
VDS = - 60 V, TJ = 125 °C
-
-
- 50
VGS = 0 V
VDS = - 60 V, TJ = 175 °C
-
-
- 150
VGS = - 10 V
VDS ≥ 5 V
- 30
-
-
VGS = - 10 V
ID = - 14.4 A
-
0.013
0.016
VGS = - 4.5 V
ID = - 12.6 A
-
0.017
0.021
VGS = - 10 V
ID = - 14.4 A, TJ = 125 °C
-
0.021
0.026
VGS = - 10 V
ID = - 14.4 A, TJ = 175 °C
-
0.026
0.032
-
40
-
-
3920
4710
-
420
510
-
295
360
-
90
140
-
13
-
-
22
-
1.4
2.3
3.2
-
16
20
VDS = - 15 V, ID = - 14.4 A
V
nA
μA
A
Ω
S
Dynamicb
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
Total Gate Chargec
Qg
Gate-Source Chargec
Qgs
Gate-Drain Chargec
Qgd
Gate Resistance
Turn-On Delay Timec
Rise Timec
Turn-Off Delay Timec
Fall Timec
Source-Drain Diode Ratings and
VGS = 0 V
VGS = - 10 V
VDS = - 30 V, f = 1 MHz
VDS = - 30 V, ID = - 14.4 A
f = 1 MHz
Rg
td(on)
tr
td(off)
VDD = - 30 V, RL = 30 Ω
ID ≅ - 1 A, VGEN = - 10 V, Rg = 6 Ω
tf
pF
nC
Ω
-
10
13
-
70
85
-
22
30
-
-
- 120
A
-
- 0.8
- 1.2
V
ns
Characteristicsb
Pulsed Currenta
ISM
Forward Voltage
VSD
IF = - 4.5 A, VGS = 0
Notes
a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.
b. Guaranteed by design, not subject to production testing.
c. Independent of operating temperature.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S11-2288-Rev. E, 28-Nov-11
2
Document Number: 65541
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SQJ461EP
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
50
60
VGS = 10 V thru 4 V
50
I D - Drain Current (A)
I D - Drain Current (A)
40
30
20
10
40
30
20
VGS = 3 V
TC = 25 °C
TC = 125 °C
10
0
TC = - 55 °C
0
0
2
4
6
8
VDS - Drain-to-Source Voltage (V)
10
0
1
2
3
4
VGS - Gate-to-Source Voltage (V)
Transfer Characteristics
Output Characteristics
0.05
75
TC = - 55 °C
60
R DS(on) - On-Resistance (Ω)
g fs - Transconductance (S)
5
TC = 25 °C
45
TC = 125 °C
30
15
0.04
0.03
VGS = 4.5 V
0.02
VGS = 10 V
0.01
0.00
0
0
10
20
30
40
50
0
60
10
20
30
40
ID - Drain Current (A)
ID - Drain Current (A)
Transconductance
50
60
On-Resistance vs. Drain Current
10
6000
ID = - 14.4 A
VGS - Gate-to-Source Voltage (V)
C - Capacitance (pF)
5000
Ciss
4000
3000
2000
Coss
1000
8
VDS = - 30 V
6
4
2
Crss
0
0
0
10
20
30
40
50
V DS - Drain-to-Source Voltage (V)
0
60
40
60
80
100
Qg - Total Gate Charge (nC)
Gate Charge
Capacitance
S11-2288-Rev. E, 28-Nov-11
20
3
Document Number: 65541
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SQJ461EP
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
100
ID = 14.4 A
1.7
10
I S - Source Current (A)
R DS(on) - On-Resistance (Normalized)
2.0
VGS = 10 V
1.4
1.1
TJ = 150 °C
1
TJ = 25 °C
0.1
0.8
0.01
0.5
- 50
- 25
0
25
50
75 100 125
TJ - Junction Temperature (°C)
150
0.001
0.0
175
1.2
Source Drain Diode Forward Voltage
0.10
1.1
0.08
0.8
ID = 250 µA
VGS(th) Variance (V)
R DS(on) - On-Resistance (Ω)
On-Resistance vs. Junction Temperature
0.2
0.4
0.6
0.8
1.0
VSD - Source-to-Drain Voltage (V)
0.06
0.04
TJ = 150 °C
0.02
0.5
ID = 1 mA
0.2
- 0.1
TJ = 25 °C
0.00
0
2
4
6
8
VGS - Gate-to-Source Voltage (V)
- 0.4
- 50
10
- 25
0
On-Resistance vs. Gate-to-Source Voltage
25
50
75 100 125
TJ - Temperature (°C)
150
175
Threshold Voltage
- 60
ID = 1 mA
Breakdown Voltage
- 63
- 66
- 69
- 72
- 75
- 50
- 25
0
25
50
75 100 125
TJ - Junction Temperature (°C)
150
175
Breakdown Voltage vs. Junction Temperature
S11-2288-Rev. E, 28-Nov-11
4
Document Number: 65541
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SQJ461EP
www.vishay.com
Vishay Siliconix
THERMAL RATINGS (TA = 25 °C, unless otherwise noted)
IDM Limited
100
ID - Drain Current (A)
Limited by RDS(on)*
10
100 µs
ID Limited
1 ms
10 ms
100 ms, 1 s, 10 s, DC
1
0.1
TC = 25 °C
Single Pulse
BVDSS Limited
0.01
0.01
0.1
1
10
100
VDS - Drain-to-Source Voltage (V)
* VGS > minimum VGS at which RDS(on) is specified
Safe Operating Area
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
Notes:
0.1
PDM
0.1
0.05
t1
t2
1. Duty Cycle, D =
t1
t2
2. Per Unit Base = R thJA = 65 °C/W
0.02
3. T JM - TA = PDMZthJA(t)
Single Pulse
4. Surface Mounted
0.01
10-4
10-3
10-2
10-1
1
Square Wave Pulse Duration (s)
10
100
600
Normalized Thermal Transient Impedance, Junction-to-Ambient
S11-2288-Rev. E, 28-Nov-11
5
Document Number: 65541
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SQJ461EP
www.vishay.com
Vishay Siliconix
THERMAL RATINGS (TA = 25 °C, unless otherwise noted)
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
10 - 4
10 - 3
10 - 2
10 - 1
Square Wave Pulse Duration (s)
1
10
Normalized Thermal Transient Impedance, Junction-to-Case
Note
• The characteristics shown in the two graphs
- Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C)
- Normalized Transient Thermal Impedance Junction-to-Case (25 °C)
are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single
pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part
mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities
can widely vary depending on actual application parameters and operating conditions.
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?65541.
S11-2288-Rev. E, 28-Nov-11
6
Document Number: 65541
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
Vishay Siliconix
PowerPAK® SO-8L Case Outline 1
W
E1
E
E2
W2
W3
W1
b2
D2
b
b1
L
L1
L1
A1
e
θ
D1
D
b3
b4
0.25 gauge line
Topside view
Backside view (single)
E2
W2
C
A
W3
W1
F
K
D3
D3
D2
b3
b4
Backside view (dual)
Revision: 05-Aug-2019
Document Number: 69003
1
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
www.vishay.com
DIM.
Vishay Siliconix
MILLIMETERS
MIN.
NOM.
INCHES
MAX.
MIN.
NOM.
MAX.
A
1.00
1.07
1.14
0.039
0.042
0.045
A1
0.00
-
0.127
0.00
-
0.005
b
0.33
0.41
0.48
0.013
0.016
0.019
b1
0.44
0.51
0.58
0.017
0.020
0.023
b2
4.80
4.90
5.00
0.189
0.193
0.197
b3
0.094
0.004
b4
0.47
0.019
c
0.20
0.25
0.30
0.008
0.010
0.012
D
5.00
5.13
5.25
0.197
0.202
0.207
D1
4.80
4.90
5.00
0.189
0.193
0.197
D2
3.86
3.96
4.06
0.152
0.156
0.160
D3
1.63
1.73
1.83
0.064
0.068
0.072
e
1.27 BSC
0.050 BSC
E
6.05
6.15
6.25
0.238
0.242
0.246
E1
4.27
4.37
4.47
0.168
0.172
0.176
E2
3.18
3.28
3.38
0.125
0.129
0.133
F
-
-
0.15
-
-
0.006
L
0.62
0.72
0.82
0.024
0.028
0.032
L1
0.92
1.07
1.22
0.036
0.042
0.048
K
0.51
0.020
W
0.23
0.009
W1
0.41
0.016
W2
2.82
0.111
W3
2.96
0.117
0°
-
10°
0°
-
10°
ECN: S19-0643-Rev. E, 05-Aug-2019
DWG: 5976
Note
• Millimeters will gover
Revision: 05-Aug-2019
Document Number: 69003
2
For technical questions, contact: pmostechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAD Pattern
www.vishay.com
Vishay Siliconix
RECOMMENDED MINIMUM PAD FOR PowerPAK® SO-8L SINGLE
5.000
(0.197)
0.510
(0.020)
2.310
(0.091)
4.061
(0.160)
0.595
(0.023)
6.250
(0.246)
8.250
(0.325)
3.630
(0.143)
0.610
(0.024)
0.410
(0.016)
2.715
(0.107)
0.860
(0.034)
1.291
(0.051)
0.710
(0.028)
0.820
(0.032)
1.905
(0.075)
1.270
(0.050)
7.250
(0.285)
Recommended Minimum Pads
Dimensions in mm (inches)
Revision: 07-Feb-12
1
Document Number: 63818
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000